Enhanced ordering in gold nanoparticles self-assembly through excess free ligands

Self-assembly of nanometer-sized particles is an elegant and economical approach to achieve dense patterns over large areas beyond the resolution and throughput capabilities of electron-beam lithography. In this paper, we present results of self-assembly of oleylamine-capped gold nanoparticles with 8.0 ± 0.3 nm diameter into densely packed and well-ordered monolayers with center-to-center distance of ～11 nm. Self-assembly was done in a Langmuir-Blodgett trough and picked up onto Si substrates. The nanoparticles undesirably assembled within micrometer-sized "droplets" that were organic in nature. However, within these droplets, we observed that the addition of the excess ligand, oleylamine, drastically enhanced the self-assembly of the nanoparticles into monolayers with near-perfect ordering. This approach has the potential use in templated self-assembly of nanoparticles for rearranging poorly ordered assembly into a commensurate prepatterned substrate.     

Synthesis, electrochemistry and metal binding properties of monosubstituted ferrocenoyl peptides with thioether-containing sidechains

Ferrocenoyl peptides incorporating thioether functionality respond more strongly to mercury(II) than to other heavy metal ions in solution. Compounds reported previously in this context are all 1,1′-disubstituted, and all include two or more sulfur-containing amino acids. To test whether two thioether groups are required for effective mercury binding by these systems, we have prepared a series of singly-substituted ferrocenoyl peptides from ferrocenecarboxylic acid and l-methionine, S-methyl-l-cysteine or S-trityl-l-cysteine, and tested them as electrochemical probes for mercury(II). Nine ferrocenoyl peptides have been synthesised using a Boc-protecting group strategy and HBTU-mediated peptide coupling. The electrochemical properties of these compounds have been determined using cyclic voltammetry, and all show fully reversible one electron oxidation steps. Forward sweep half wave peaks (E_F), reverse sweep half wave peaks (E_R), peak separations (ΔE_P) and half wave potentials (E_1/2) are reported. Changes in the potential of the iron(II)/iron(III) redox couple of the ferrocene core have been used to quantify heavy metal-peptide interactions, revealing that these monotopic systems also respond more strongly to mercury(II) than to zinc(II), cadmium(II), silver(I) and lead(II). NMR experiments to characterise the peptide-mercury interaction implicate the thioether sulfur as the site of mercury binding and indicate 1:1 stoichiometry. The crystal structure of ferrocenoyl-S-methyl-l-cysteine methyl ester is also reported. The greater responsiveness of these systems to mercury(II) makes them interesting leads for the development of biologically inspired sensors for this toxic heavy metal.     

Targeted quantitative bioanalysis in plasma using liquid chromatography/high-resolution accurate mass spectrometry: an evaluation of global selectivity as a function of mass resolving power and extraction window, with comparison of centroid and profile modes

There is a growing interest in exploring the use of liquid chromatography coupled with full-scan high resolution accurate mass spectrometry (LC/HRMS) in bioanalytical laboratories as an alternative to the current practice of using LC coupled with tandem mass spectrometry (LC/MS/MS). Therefore, we have investigated the theoretical and practical aspects of LC/HRMS as it relates to the quantitation of drugs in plasma, which is the most commonly used matrix in pharmacokinetics studies. In order to assess the overall selectivity of HRMS, we evaluated the potential interferences from endogenous plasma components by analyzing acetonitrile-precipitated blank human plasma extract using an LC/HRMS system under chromatographic conditions typically used for LC/MS/MS bioanalysis with the acquisition of total ion chromatograms (TICs) using 10 k and 20 k resolving power in both profile and centroid modes. From each TIC, we generated extracted ion chromatograms (EICs) of the exact masses of the [M + H](+) ions of 153 model drugs using different mass extraction windows (MEWs) and determined the number of plasma endogenous peaks detected in each EIC. Fewer endogenous peaks are detected using higher resolving power, narrower MEW, and centroid mode. A 20 k resolving power can be considered adequate for the selective determination of drugs in plasma. To achieve desired analyte EIC selectivity and simultaneously avoid missing data points in the analyte EIC peak, the MEW used should not be too wide or too narrow and should be a small fraction of the full width at half maximum (FWHM) of the profile mass peak. It is recommended that the optimum MEW be established during method development under the specified chromatographic and sample preparation conditions. In general, the optimum MEW, typically ≤ ±20 ppm for 20 k resolving power, is smaller for the profile mode when compared with the centroid mode.     

A mild and efficient palladium-catalyzed cyanation of aryl chlorides with K4[Fe(CN)6

An efficient palladium-catalyzed cyanation of aryl chlorides is established. In the presence of a highly effective Pd/CM-phos catalyst, cyanation of aryl chlorides proceeds at 70 °C in general, which is the mildest reaction temperature achieved so far for this process. Common functional groups such as keto, aldehyde, ester, nitrile and -NH(2), and heterocyclic coupling partners including N-H indoles are well tolerated. Moreover, a sterically hindered nonactivated ortho,ortho-disubstituted electrophile is shown to be a feasible coupling partner in cyanation.     

Rhodium(I)-catalyzed addition of arylboronic acids to (benzyl-/arylsulfonyl)acetonitriles: efficient synthesis of (Z)-β-sulfonylvinylamines and β-keto sulfones

An efficient rhodium(I)-catalyzed addition of arylboronic acids to (benzyl-/arylsulfonyl)acetonitrile is described. Novel β-sulfonylvinylamine products are formed in a stereoselective fashion (Z-alkene). Upon hydrolysis, useful β-keto sulfones are obtained with a broad scope of aryl and sulfonyl substituents.     

Engineering of glucose oxidase for direct electron transfer via site-specific gold nanoparticle conjugation

Optimizing the electrical communication between enzymes and electrodes is critical in the development of biosensors, enzymatic biofuel cells, and other bioelectrocatalytic applications. One approach to address this limitation is the attachment of redox mediators or relays to the enzymes. Here we report a simple genetic modification of a glucose oxidase enzyme to display a free thiol group near its active site. This facilitates the site-specific attachment of a maleimide-modified gold nanoparticle to the enzyme, which enables direct electrical communication between the conjugated enzyme and an electrode. Glucose oxidase is of particular interest in biofuel cell and biosensor applications, and the approach of "prewiring" enzyme conjugates in a site-specific manner will be valuable in the continued development of these systems.     

Aptamer-barcode based immunoassay for the instantaneous derivatization chemiluminescence detection of IgE coupled to magnetic beads

We report on a highly sensitive aptameric assay system for the determination of IgE, where a special chemiluminescence (CL) reagent, 3,4,5-trimethoxylphenylglyoxal (TMPG), acts as the signaling molecule and polystyrene beads as the amplification platform. Briefly, a "sandwich-type" detection strategy is employed in our design, where magnetic beads functionalized with a capture antibody were reacted with the target protein IgE, and then sandwiched with the aptamer-barcodes which were prepared by assembling polystyrene beads with IgE aptamer. The target immunoreaction event could be sensitively detected via an instantaneous derivatization reaction between TMPG and the guanine (G) nucleotides within the aptamer-barcodes to form an unstable CL intermediate for the generation of light. Further signal amplification is achieved by extending the G nucleotide-rich domain on the aptamer backbone for second amplification. Such simple amplified CL transduction allows the detection of IgE down to the 4.6 pM level, which is better than most previous aptameric methods for IgE detection. This new protocol also provides a good capability in discriminating IgE from nontarget proteins such as IgG, IgA, IgM, interferon and thrombin. The practical application of the proposed aptamer-barcode based immunoassay was successfully carried out for the determination of IgE in 20 human serum samples. It is straightforward to adapt this strategy to detect a spectrum of other proteins by using different aptamers, thus this method may offer a new direction in designing high-performance CL aptasensors for early diagnoses of diseases.     

Bruceines K and L from the Ripe Fruits of Brucea javanica

Bruceine K ( 1 ), a pentacyclic C₂₀‐quassinoid bearing a unique 12,20‐epoxy moiety, and bruceine L ( 2 ), along with the ten known compounds (6S,7E)‐6,9,10‐trihydroxy‐ and (6S,7E)‐6,9‐dihydroxymegastigma‐4,7‐dien‐3‐one ( 3 and 4 , resp.), cleomiscosins A–C, luteoline, quercetine, bruceantinol, pinoresinol, and thevetiaflavone, were isolated from the ripe fruits of Brucea javanica. Bruceines K ( 1 ) and L ( 2 ) were determined to be (1β,2α,11β,12β,14ξ,15β)‐12,20‐epoxy‐1,2,11,13,14,15‐hexahydroxypicras‐3‐en‐16‐one and (1β,2α,11β,12β,15β)‐13,20‐epoxy‐1,2,11,12‐tetrahydroxy‐16‐oxo‐15‐(senecioyloxy)picras‐3‐en‐21‐oic acid methyl ester (senecioic acid=3‐methylbut‐2‐enoic acid), respectively, on the basis of NMR (¹H‐ and ¹³C‐NMR, DEPT, ¹H,¹H‐COSY, NOESY, HMQC, and HMBC) and ESI‐MS data. Among the known compounds, (6S,7E)‐6,9,10‐trihydroxy‐ and (6S,7E)‐6,9‐dihydroxymegastigma‐4,7‐dien‐3‐one ( 3 and 4 , resp.), cleomiscosin C, luteoline, quercetine, and thevetiaflavone were isolated for the first time from the Brucea plants.