Improving nucleation in the fabrication of high-quality 3D macro-porous copper film through the surface-modification of a polystyrene colloid-assembled template

A new approach is developed to the fabrication of high-quality three-dimensional macro-porous copper films. A highly-ordered macroporous copper film is successfully produced on a polystyrene sphere (PS) template that has been modified by sodium dodecyl sulfate (SDS). It is shown that this procedure can change a hydrophobic surface of PS template into a hydrophilic surface. The present study is devoted to the influence of the electrolyte solution transport on the nucleation process. It is demonstrated that the permeability of the electrolyte solution in the nanochannels of the PS template plays an important role in the chemical electrodeposition of high-quality macroporous copper film. The permeability is drastically enhanced in our experiment through the surface modification of the PS templates. The method could be used to homogeneously produce a large number of nucleations on a substrate, which is a key factor for the fabrication of the high-quality macroporous copper film.     

基于斯托克斯矢量的偏振成像仪器及其进展

偏振成像技术将景物的偏振信息转化为二维图像信息,从而可以和灰度图像一样对目标景物进行场景特征分析。介绍了基于斯托克斯矢量的偏振成像原理。按照获取斯托克斯矢量方法的不同,分别介绍了偏振片起偏、偏振棱镜分光和可变延迟波片调制三类分时偏振成像方式,分振幅、分孔径、分焦平面三种同时偏振成像方式。结合我国的制造水平,设计了双CCD渥拉斯顿棱镜同时偏振成像实验系统,并采集了实验图像。分析了各种偏振成像方式的优缺点。指出了偏振激光照明主动偏振成像、光谱偏振成像是偏振成像仪器进一步的发展方向。     

色散补偿光子晶体光纤结构参数对其色散的影响

光子晶体光纤由于其灵活可调的色散特性用作色散补偿具有极大的应用潜力. 设计了一种色散补偿光子晶体光纤, 并运用频域有限差分法模拟了其色散特性,从理论上分析了其结构参数孔间距Λ和空气占空比d/Λ对该光子晶体光纤的色散系数的影响, 并且实际制备出了3种不同结构参数的光子晶体光纤. 通过对其色散曲线对比分析表明: 当光子晶体光纤孔间距在1 μm附近时, 其色散系数随着孔间距Λ和占空比d/Λ的增大而增加, 但对于孔间距Λ的变化比占空比d/Λ更为敏感, 并且随着孔间距Λ的增加,其对色散系数的影响能力逐渐减小. 设计并制备的光子晶体光纤在1550 nm处的色散系数为-241.5 ps·nm^-1·km^-1, 相对色散斜率为0.0018, 具有较好的色散补偿能力. 关键词： 色散 色散补偿 光子晶体光纤 结构参数     

椭圆强非局域空间光孤子

对傍轴椭圆高斯光束在具有椭圆对称响应特性的强非局域非线性介质中的演化规律进行研究，得到了光束各参量演化的精确解析解，分析了单向空间光孤子和强非局域椭圆空间光孤子的形成条件，发现了椭圆光孤子的相移与介质响应函数的椭圆率有关. 关键词： 椭圆对称强非局域响应介质 椭圆强非局域空间光孤子 相移     

Analysis of the Coaxial Ridge-Loaded Helical Groove Waveguide

The coaxial ridge-loaded helical groove waveguide is proposed in this paper. As an all-metal slow-wave circuit, it has advantages of good heat dissipation and great size, and thus is suitable for use of millimeter TWT. By means of field theory, the expressions of the dispersion equation and the coupling impedance of the coaxial ridge-loaded helical groove waveguide are obtained. The influence of various circuit dimensions on the dispersion relation and the coupling impedance is investigated by the results of numerical computation.     

外应力场下铁磁/反铁磁双层膜系统的铁磁共振性质

从系统能量出发，采用Smith和Beljers理论方法研究了铁磁/反铁磁双层膜系统在外应力场下的铁磁共振现象.本模型中铁磁薄层具有单轴磁晶各向异性和立方磁晶各向异性，而反铁磁层非常薄因而其能量可忽略.推导出了该系统的铁磁共振频率和频谱宽度的解析式.结果表明：外应力场仅在低磁场下对具有立方磁晶各向异性系统的铁磁共振有影响，且区分弱磁场和强磁场的临界场依赖于外应力场的方向. 关键词： 铁磁/反铁磁双层膜 交换偏置 铁磁共振 应力场     

Broadband waveguide intersections with low cross talk in photonic crystal circuits

We propose a new mechanism for constructing waveguide intersections with broad bandwidth and low cross talk in photonic crystal (PC) circuits. The intersections are created by combination of coupled-cavity wave-guides (CCWs) with conventional line-defect waveguides. This mechanism utilizes the strong dependence of the defect coupling on the field pattern in the defects and the alignment of the defects (i.e., the coupling angle) in CCWs. By properly designing the defect mode, we demonstrate through numerical simulation the establishment of such a waveguide intersection in one of the most useful PCs, which is based on a two-dimensional triangular lattice of air holes made in a dielectric material. The transmission of a 500-fs pulse at ~1.3 microm is simulated by use of the finite-difference time-domain method, showing negligible distortion and low cross talk.     

Influence of vapor transport equilibration on Raman spectra of Er:LiNbO3 crystals

Raman spectra of as-grown and vapor transport equilibration (VTE) treated Er:LiNbO₃ crystals, which have different cut orientations (X-cut and Z-cut), different Er-doping levels (Er:(0.2, 0.4 and 2.0 mol%)LiNbO₃) and different VTE durations (80, 120, 150 and 180 h), were recorded at room temperature in the wavenumber range 50-1000 cm⁻¹ by using backward scattering geometry. The spectra were attributed on the basis of their spectral features and the previous experimental work and the most recent theoretical progress in lattice dynamics on pure LiNbO₃. In comparison with the pure crystal the most remarkable effect of Er-doping on the Raman spectrum is observed for the E(TO₉) mode. It does not appear at 610 cm⁻¹ as the pure crystal, but locates at 633 cm⁻¹. In addition, the doping also results in the lowering of the Raman phonon frequency, the broadening of the Raman linewidth and the changes of the relative Raman intensity of some peaks. The VTE treatment results in the narrowing of the linewidth, the recovery of the lowered phonon frequency and the further changes of relative Raman intensity. The narrowing of Raman linewidth indicates that the VTE processing has brought these crystals closer to stoichiometric composition. The VTE treatment has induced the formation of a precipitate ErNbO₄ in the high-doped Er(2.0%):LiNbO₃ crystals whether X- or Z-cut. For these precipitated crystals, besides above linewidth and phonon frequency features, they also display more significant Raman intensity changes compared with those not precipitated crystals. In addition, a slight mixing between A₁(TO) and E(TO) spectra is also observed for these precipitated crystals. Above doping and VTE effects on Raman spectra were quantitatively or qualitatively correlated with the characteristics of the crystal structure and phonon vibrational system.     

Spectral line competition in a coaxial electron-beam-pumped high pressure Ar/Xe laser

In order to study the kinetic mechanism of the e-beam pumped Ar/Xe laser, the temporal profiles of individual laser lines during multiline oscillation have been measured as a function of power deposition (1–12MW/cm³) and gas laser pressure (2–14 bar) using a short pulse (30 ns) coaxial electron beam as excitation source. It was found that the optimum output energy at each pressure was obtained at the same specific power deposition.Strong line competition has been observed between the 2.65 and 1.73 m transitions. In order to explain our results we suggest that besides electron collision mixing (ECM) between the 5d and 6p levels of Xe, there is also a redistribution between all 6p levels which strongly favours the lower levels at higher pumping densities.     

Few-photon routing via chiral light-matter couplings

A quantum router is one of the essential elements in the quantum network. Conventional routers only direct a single photon from one quantum channel into another. Here, we propose a few-photon router. The active element of the router is a single qubit chirally coupled to two independent waveguides simultaneously, where each waveguide mode provides a quantum channel. By introducing the operators of the scatter-free space and the controllable space, the output state of the one-photon and two-photon scattering are derived analytically. It is found that the qubit can direct one and two photons from one port of the incident waveguide to an arbitrarily selected port of the other waveguide with unity, respectively. However, two photons cannot be simultaneously routed to the same port due to the anti-bunch effect.