Microwave extraction and rapid isolation of arjunic acid from Terminalia arjuna (Roxb. ex DC.) stem bark and quantification of arjunic acid and arjunolic acid using HPLC-PDA technique

Arjunic acid and arjunolic acid are main bioactive components of Terminalia arjuna stem bark and reported for various biological activities. In this study, microwave-assisted extraction (MAE) of arjunic and arjunolic acid from stem bark of T. arjuna was investigated with developed and validated HPLC-PDA method, which resulted in the isolation of a novel anticancer molecule i.e. arjunic acid. Effects of several experimental parameters, such as type and volume of extraction solvents, microwave power, microwave extraction time, on the extraction efficiencies of arjunic, and arjunolic acid from stem bark of T. arjuna were evaluated. The optimal extraction conditions identified were 5.0 g quantity of stem bark powder, 20 mL of ethyl acetate, preleaching time 10 min, microwave power 600 W, temperature 65°C, and microwave irradiation time 5 min. The results showed that MAE is a more rapid extraction method with higher yield and lower solvent consumptions than reported methods. The HPLC-PDA analysis method was developed and validated to have good linearity, precision, sensitivity, and accuracy. MAE-HPLC-PDA is a faster, convenient, and appropriate method for isolation and determination of arjunic acid and arjunolic acid in the stem bark of T. arjuna.     

Molecular precursors for the preparation of homogenous zirconia-silica materials by hydrolytic sol-gel process in organic media. Crystal structures of [Zr{OSi(O(t)Bu)3}4(H2O)2]·2H2O and [Ti(O(t)Bu){OSi(O(t)Bu)3}3

[Zr(OPr(i))(4)·Pr(i)OH] reacts with [HOSi(O(t)Bu)(3)] in anhydrous benzene in 1:1 and 1:2 molar ratios to afford alkoxy zirconosiloxane precursors of the types [Zr(OPr(i))(3){OSi(O(t)Bu)(3)}] (A) and [Zr(OPr(i))(2){OSi(O(t)Bu)(3)}(2)] (B), respectively. Further reactions of A or B with glycols in 1:1 molar ratio afforded six chemically modified precursors of the types [Zr(OPr(i))(OGO){OSi(O(t)Bu)(3)}] (1A-3A) and [Zr(OGO){OSi(O(t)Bu)(3)}(2)] (1B-3B), respectively [where G = (-CH(2)-)(2) (1A, 1B); (-CH(2)-)(3) (2A, 2B) and (-CH(2)CH(2)CH(CH(3)-)} (3A, 3B)]. The precursors A and B are viscous liquids, which solidify on ageing whereas the other products are all solids, soluble in common organic solvents. These were characterized by elemental analyses, molecular weight measurements, FAB mass, FTIR, (1)H, (13)C and (29)Si-NMR studies. Cryoscopic molecular weight measurements of all the products, as well as the FAB mass studies of 3A and 3B, indicate their monomeric nature. However, FAB mass spectrum of the solidified B suggests that it exists in dimeric form. Single crystal structure analysis of [Zr{OSi(O(t)Bu)(3)}(4)(H(2)O)(2)]·2H(2)O (3b) (R(fac) = 11.9%) as well as that of corresponding better quality crystals of [Ti(O(t)Bu){OSi(O(t)Bu)(3)}(3)] (4) (R(fac) = 5.97%) indicate the presence of a M-O-Si bond. TG analyses of 3A, B, and 3B indicate the formation of zirconia-silica materials of the type ZrO(2)·SiO(2) from 3A and ZrO(2)·2SiO(2) from B or 3B at low decomposition temperatures (≤200 °C). The desired homogenous nano-sized zirconia-silica materials [ZrO(2)·nSiO(2)] have been obtained easily from the precursors A and B as well as from the glycol modified precursors 3A and 3B by hydrolytic sol-gel process in organic media without using any acid or base catalyst, and these were characterized by powder XRD patterns, SEM images, EDX analyses and IR spectroscopy.     

Preparation of a poly-nanocage dynamer: correlating the growth of polymer strands using constitutional dynamic chemistry and heteroleptic aggregation

A metallosupramolecular prismatic nanocage with altogether six reactive aldehyde terminals was utilized as a sophisticated "monomer" in a template-directed constitutional dynamic imine polymerization to prepare an unprecedented triple-stranded dynamer. To analyze the correlated growth in its three congener strands, a fully covalent triple-armed star polymer was fabricated from the metallodynamer through capping, imine reduction, and removal of the template. Atomic force microscopy analysis of 68 triple-armed star polymer molecules suggests that the growth of their arms is correlated to ~72%.     

Enhanced light harvesting efficiencies of bis(ferrocenylmethyl)-based sulfur rich sensitizers used in dye sensitized TiO2 solar cells

In this work, the photosensitizing properties of ferrocene (Fc)-based compounds FcCH(2)CS(3)CH(2)Fc (1) and FcCH(2)SSCH(2)Fc (2) were investigated and significant enhancement in the light harvesting efficiency was observed compared to those achieved with previously reported compounds from our lab. The compounds were fully characterized by spectroscopy and X-ray crystallography, and their electrochemical properties studied. DSSCs based on these dyes display efficiencies comparable to those of a standard cell based on N719 under similar experimental conditions. These studies demonstrate that ferrocenyl-based sulfur rich compounds with proper orientation of the Fc groups assisted via suitable linkers, together with desired redox properties and visible region electronic absorption features could constitute a new class of photosensitizers targeting light driven reactions.     

Simultaneous quantification of centchroman and its 7-demethylated metabolite in rat dried blood spot samples using LC-MS/MS

An approach has been developed for the quantitative determination of concentrations of centchroman ( I), a nonsteroidal once‐a‐week oral contraceptive, and its major metabolite (7‐desmethyl centchroman, II) using dried blood spots (DBS) on paper, rather than conventional plasma samples. The assay employed simple solvent extraction of the DBS sample circle (6 mm) requiring small blood volumes (30 μL) followed by reversed‐phase HPLC separation, combined with multiple reaction monitoring mass spectrometric detection. The calibration plot in matrix using d ‐trans‐hydroxy chroman as internal standard (IS) was linear (r² = 0.998) over ranges of 1.5–240 and 4.5–720 ng/mL for I and II, respectively. The recoveries of both I and II were always >60% with quantification limits (signal‐to‐noise ratio = 10) of 1.5 and 4.5 ng/mL for I and II, respectively. The intra‐day and inter‐day precision (%RSD) and accuracy (%bias) variations in blood spots for both I and II were better than 13%. Moreover, both I and II were stable in DBS for at least 3 months when stored at room temperature. The developed method was successfully applied to the pharmacokinetic interaction study after oral administration of centchroman with and without co‐administration of carbamazepine in female Sprague–Dawley rats using serial sampling and results were comparable with the plasma concentrations reported earlier. Copyright © 2011 John Wiley & Sons, Ltd.     

NHC-catalysed diastereoselective synthesis of multifunctionalised piperidines via cascade reaction of enals with azalactones

NHC-catalysed azalactone ring-opening and piperidine ring-closing cascade with α,β-unsaturated aldehydes (enals) in a one-pot operation is reported. The present reaction cascade offers a convenient method for a highly diastereoselective synthesis of multifunctionalised piperidines in excellent yields under mild conditions.     

Heterogeneous reactions of epoxides in acidic media

Epoxides have recently been identified as important intermediates in the gas phase oxidation of hydrocarbons, and their hydrolysis products have been observed in ambient aerosols. To evaluate the role of epoxides in the formation of secondary organic aerosols (SOA), the kinetics and mechanism of heterogeneous reactions of two model epoxides, isoprene oxide and α-pinene oxide, with sulfuric acid, ammonium bisulfate, and ammonium sulfate have been investigated using complementary experimental techniques. Kinetic experiments using a fast flow reactor coupled to an ion drift-chemical ionization mass spectrometer (ID-CIMS) show a fast irreversible loss of the epoxides with the uptake coefficients (γ) of (1.7 ± 0.1) × 10(-2) and (4.6 ± 0.3) × 10(-2) for isoprene oxide and α-pinene oxide, respectively, for 90 wt % H(2)SO(4) and at room temperature. Experiments using attenuated total reflection-Fourier transform infrared spectroscopy (ATR-FTIR) reveal that diols are the major products in ammonium bisulfate and dilute H(2)SO(4) (<25 wt %) solutions for both epoxides. In concentrated H(2)SO(4) (>65 wt %), acetals are formed from isoprene oxide, whereas organosulfates are produced from α-pinene oxide. The reaction of the epoxides with ammonium sulfate is slow and no products are observed. The epoxide reactions using bulk samples and Nuclear Magnetic Resonance (NMR) spectroscopy reveal the presence of diols as the major products for isoprene oxide, accompanied by aldehyde formation. For α-pinene oxide, organosulfate formation is observed with a yield increasing with the acidity. Large yields of organosulfates in all NMR experiments with α-pinene oxide are attributed to the kinetic isotope effect (KIE) from the use of deuterated sulfuric acid and water. Our results suggest that acid-catalyzed hydrolysis of epoxides results in the formation of a wide range of products, and some of the products have low volatility and contribute to SOA growth under ambient conditions prevailing in the urban atmosphere.     

Stratified flow boiling heat transfer study of a HFC/HC refrigerant mixture in smooth horizontal tubes

The flow boiling heat transfer coefficients of R-134a/R-290/R-600a (91%:4.068%:4.932% by mass) refrigerant mixture are experimentally arrived in two tubes of diameter 9.52 and 12.7 mm. The tests are conducted to target the varied heat flux condition and stratified flow pattern found in evaporators of refrigerators and deep freezers. The varied heat flux condition is imposed on the refrigerant using a coaxial counter-current heat exchanger test section. The experiments are performed for mass flow rates of the refrigerant mixture between 3 and 5 g s⁻¹ and entry temperature between −8.59 and 5.33°C which are bubble temperatures corresponding to a pressure of 3.2 and 5 bar. The influences of heat flux, mass flow rate, pressure, flow pattern, tube diameter on the heat transfer coefficient are discussed. The profound effects of nucleate boiling prevailing even at higher vapor qualities in evaporators are highlighted. The heat transfer coefficient of the refrigerant mixture is also compared with that of R-134a.     

Crystallographic analysis of Royline monohydrate [C25H41NO7 · H2O]

The crystal and molecular structures of the alkaloid Royline {(1α,6β,14α, 16β)-20-ethyl-4-hydroxymethyl)-1,6,14,16-tetramethoxyaconitane-7,8-diol} with a water molecule has been determined by X-ray diffraction analysis. The compound crystallizes in the space group P2₁ with the unit cell parameters a = 10.985(1) Å, b = 7.898(1) Å, c = 14.956(1) Å, β = 102.96(1)°, V = 1264.52 ų, Z = 2, λMoK _α = 0.71073 Å, and R = 0.033 for 2067 observed reflections. Rings A, B, and C adopt a chair conformation, ring D is a half-boat, ring E is a half-chair, and ring F is in an envelope conformation with C(14) at the flap. Molecules are linked together in the crystal by hydrogen bonds.     

Correlation between the cross-linking and degradation activation energy of cotton fabric treated with chitosan kinetic study by ‘model-free’ multiple heating rate methods

Journal of Thermal Analysis and Calorimetry - The different concentrations of chitosan were applied on cotton fabrics using glutaraldehyde as a cross-linking agent. The fabric samples were...