Voltammetric determination of uric acid by using gold nanotubule electrode

Gold nanotubule membranes were prepared by using electroless deposition of gold within the pores and surfaces of polycarbonate track-etched membranes.And the gold nanotubule membrane was used as an electrode for determination of uric acid in urine samples for the first time.In Britton-Robinson buffer of pH 4.56,uric acid exhibited well-defined differential pulse voltammograms.And the interference between coexistent ascorbic acid and uric acid was overcome owing to the attractive ability of the gold nanotubule electrode to yield a large anodic peak difference ca.0.404 V(vs.SCE).The proposed method was then applied to the determination of uric acid in urine without any pretreatment.     

A study of the polarographic behaviour of meso-tetra(4-trimethylammoniumphenyl)porphine and its copper and magnesium complexes and its analytical applications

The investigation of the electrochemical reduction and the adsorption of meso-tetra(4-trimethylammoniumphenyl)porphine (T(4-TMAP)P) at a mercury electrode in alkaline solution shows that the overall reduction involves three two-electron steps, of which the first step is reversible and the latter two are irreversible. In addition, T(4-TMAP)P and its metal complexes of Cu(II) and Mg(II) can be strongly adsorbed on the surface of a mercury electrode. The adsorption phenomena have been utilized as a preconcentration step for the determination of trace amounts of the two ions by single sweep polarography. For copper, the detection limit is 1 × 10^–8 mol dm^–3, for magnesium, 1 × 10^–7 mol dm^–3, the latter being limited by the reagent blank. The proposed method was applied to the determination of Cu and Mg in various types of samples (chemicals, hair and liver tissues) with satisfactory results.     

胆汁酸的薄层层析——数理统计法用于层析溶剂系统的选择

本文选择氯仿、乙醇、乙酸乙酯、醋酸和水等五种溶剂作为胆汁酸薄层层析的展开剂,采用正交设计法[L_(16)(4~5)]安排实验,对胆固醇、胆酸、脱氧胆酸、甘氨胆酸、甘氨脱氧胆酸、牛磺胆酸、牛磺脱氧胆酸和卵磷脂等八种化合物的R_f值及层析谱斑点的集中情况,用直观分析和方差分析法处理,得到了单向一次薄层层析全部分离胆汁的溶剂系统,较文献报道方法为佳。     

Unprecedented isospecific 3,4-polymerization of isoprene by cationic rare earth metal alkyl species resulting from a binuclear precursor

The isospecific 3,4-polymerization of isoprene has been achieved for the first time by use of a combination of a binuclear rare earth metal dialkyl complex, such as [Me2Si(C5Me4)(mu-PCy)YCH2SiMe3]2 (Cy = cyclohexyl), and an equimolar amount of [Ph3C][B(C6F5)4] as a catalyst system. A DFT calculation suggested that a binuclear monocationic monoalkyl species, such as [Me2Si(C5Me4)(mu-PCy)Y(mu-CH2SiMe3)Y(mu-PCy)(C5Me4)SiMe2]+, in which the alkyl group bridges the two metal centers, could be the true catalyst species.     

Stereocontrolled synthesis of the DE ring system of the marine alkaloid upenamide

[reaction: see text] A stereocontrolled synthesis of the DE fragment (2) of the marine alkaloid upenamide (1) is described. The synthesis proceeds in 12 steps from caprolactone (10) and 20-25% overall yield.     

Biosorption of americium-241 by Saccharomyces cerevisiae

The biosorption of radionuclide ²⁴¹Am from solution by Saccharomyces cerevisiae (S. cerevisiae), and the effects of experimental conditions on the adsorption were investigated. The preliminary results showed thatS. cerevisiae is a very efficient biosorbent. An average of more than 99% of the total ²⁴¹Am could be removed by S. cerevisiae of 2.1 g/l (dry weight) from ²⁴¹Am solutions of 17.54–4386.0 mg/l (2.22 MBq/l–555 MBq/l) with adsorption capacities of 7.45–1880.0 mg/g biomass (dry weight) (0.94 MBq/g–237.9 MBq/g). The adsorption equilibrium was achieved within 1 hour and the optimum pH ranged 1–3. No significant differences on ²⁴¹Am adsorption were observed at 10–45 °C, or in solutions containing Au³⁺ or Ag⁺, even 2000 times above ²⁴¹Am concentration. The relationship between concentrations and adsorption capacities of ²⁴¹Am indicated the biosorption process should be described by the Freundlich adsorption isotherm.     

Modeling η5‐C5Me4SiMe3 with η3‐C3H5 for DFT study of a tetranuclear yttrium polyhydrido complex [(η5‐C5Me4SiMe3)YH2]4

π‐Allyl (η³‐C₃H₅), a four‐electron donor, was used as a ligand model to replace η⁵‐C₅Me₄SiMe₃ in DFT calculations on the tetranuclear yttrium polyhydrido complex (η⁵‐C₅Me₄SiMe₃)₄Y₄H₈ containing a Y₄H₈ tetrahedral core structure, which may separate the four π‐allyl groups and hence suppress the allyl ligand coupling during the computation. In terms of the calculated core geometry, isomerization energy barrier, charge population, and frontier orbital features of the complex, the η³‐C₃H₅ ligand model is comparable to η⁵‐C₅H₅. © 2006 Wiley Periodicals, Inc. Int J Quantum Chem, 2007     

Synthesis and optical resolution of a series of inherently chiral calix[4]crowns with cone and partial cone conformations

A series of inherently chiral calix[4]arenes with cone and partial cone conformations and with crown ether moieties of variable size have been readily synthesized. By taking advantage of the carboxy appendage on the lower rim, these were condensed with the chiral auxiliary (S)-BINOL to form diastereomers which, in most cases, could be separated by preparative TLC, or more desirably, by column chromatography on silica gel (diastereomeric excess >99 % based on HPLC analysis). Seven enantiopure antipodes of inherently chiral calix[4]crowns were obtained after hydrolysis. It has been found that both the size of the crown moiety and alkylation of the last phenolic hydroxy group (accompanied with or without a change in the conformation) affect the separation of the diastereomers.     

The synthesis of substituted [1]benzothieno[2,3-c]quinolines and their N-methyl quaternary salts

Four substituted [1]benzothieno[2,3-c]quinolines 14a-14d were prepared by photocyclization of the appropriate carboxamides 8a-8d to the corresponding [1]benzothieno[2,3-c]quinolin-6(5H)-ones 12a-12d followed by chlorination to 6-chloro[1]benzothieno[2,3-c]quinolines 13a-13d and dechlorination resulting in the title compounds. Treatment of 14a-14d with iodomethane furnished the corresponding N-methyl quaternary salts 5a-5d .     

微生物传感器—高效液相色谱联用研究

本文用自制的单一或复合的微生物传感器作检测器,与高效液相色谱结合,对7种氮基酸,5种有机醇,以及同化糖与醇,维生素等7种混合体系进行分离硷测,取得较好的结果。