Photo-and Electro-luminescence of the New Ternary Europium(III) Complex

In recent years, the interest in developing luminescent lanthanide complexes has been greatly stimulated by their potential use in electroluminescent displays1. Europium complexes appear most attractive in view of the high photoluminescent efficiency and the high monochromatic red light that are widely exploited in full-color displays2. It has been approved that the second ligand plays an important role in europium complexes, the synergistic complexation of the second ligand can not only lead …     

聚四氟乙烯纤维辐照接枝制备弱酸性离子交换剂及其对Cu~(2+)的吸附

以聚四氟乙烯纤维为基体通过6 0 Co辐射引发与丙烯酸接枝制备弱酸性阳离子交换纤维 .产物功能基含量为 3 0 6mmol g,在pH =5时该纤维达到对Cu2 + 的最大动态吸附量为 10 7 4 8mg g.使用不同浓度HCl对饱和吸附铜的接枝纤维进行洗脱 ,证实该纤维对铜离子具有优异的解吸性能     

On the dissolution processes of Na2I+ and Na3I2+ with the association of water molecules: mechanistic and energetic details

The sequential association energies for one through six water molecules clustering to Na(2)I(+), as well as one and two water molecules clustering to Na(3)I(2)(+), are measured. The association energies show a pairwise behavior, indicating a symmetric association of water molecules to the linear Na(2)I(+) and Na(3)I(2)(+) ions. This pairwise behavior is well reproduced by Density Functional Theory (DFT) calculations. DFT calculations also suggest that a significant separation of charge for the Na-I ion pair occurs when four or more water molecules cluster to a single sodium center. Two different solvent-separated ion pairs have been identified with the DFT calculations. Experiments also show that the dissolution processes, loss of a neutral NaI unit, occurs when six or more water molecules have been added to Na(2)I(+) cluster. However, one or two water molecules are able to detach an NaI unit from the Na(3)I(2)(+) cluster. The difference in solubility of the Na(2)I(+) and Na(3)I(2)(+) ions is due to the difference in the energies required to lose an NaI unit from these two species. The experiment also confirms that the loss of a neutral NaI unit, instead of an Na(+) ion, occurs during the dissolution processes of Na(3)I(2)(+). The microsolvation schemes proposed to explain our experimental observations are supported by DFT and phase space theory (PST) calculations.     

Comparative study on the synthesis, photoluminescence and application in InGaN-based light-emitting diodes of TAG:Ce phosphors

Cerium-doped terbium aluminum garnet phosphors, Tb₃Al₅O₁₂:Ce³⁺ (TAG:Ce³⁺), were prepared with different methods: co-precipitation (CP), half dry-half wet (HDHW), sol-combustion (SC) and Pechini method plus conventional solid state reaction (SS) method. Comparative study on the phase-formation, particle size, morphologies and luminescent characteristics of the phosphors synthesized with different methods was carried out by means of XRD, FE-SEM and photoluminescence (PL) analysis and SC method was confirmed by the comparison of the results to be an easy and an effective process for preparing efficient and nano-sized Tb₃Al₅O₁₂:Ce³⁺ phosphors. Various factors influencing particle size, morphology and PL of the phosphors, such as precursor preparation, reaction temperature and heating time, were also investigated. Light-emitting diodes (LEDs) were fabricated with each phosphor and a ∼460 nm emitting InGaN chip. The LEDs from SS, HDHW and CP exhibit strong white emission while those from SC and Pechini emit yellow, revealing that the emission characteristics of LEDs are influenced not only by the morphology and the particle size of the phosphors, but also by the preparing process of the phosphors.     

铂锡双金属催化剂上丙烷脱氢反应研究

对比研究了Ｓｎ／Ｐｔ比为１；１，２，：１和５：１的原子簇担载于γ－Ａｌ２Ｏ３上制成的Ｐｔ＝Ｓｎ原子簇催化剂，和用ＳｎＣｌ２和Ｈ２ＰｔＣｌ６浸渍制备的相应Ｓｎ／Ｐｔ比的催化剂对丙烷脱氢生成丙烯的催化性能。     

Electronic structures of dihedral (D5h, D5d, D6h, D6d) fullerenes

By means of our proposed method for Hückel theory calculation, we have calculated the electronic structures of dihedral (D_5h, D_5d, D_6h, D_6d) fullerences, which are generated from icosahedral C₂₀, C₆₀, C₈₀, C₁₈₀, C₂₄₀ and C₅₄₀, respectively. From the calculated results of 1224 fullerence molecules, certain rules on the stability and chemical reactivity have been drawn for such types of dihedral fullerenes.     

Resonance Rayleigh scattering method for the recognition and determination of double-stranded DNA using amikacin

In weakly acidic buffer medium, the interaction of amikacin with calf thymus DNA, yeast RNA and denatured DNA has been investigated by using resonance Rayleigh scattering (RRS) technique. The result shows that calf thymus DNA is capable of enhancing the RRS intensity of the amikacin, while yeast RNA and denatured DNA have very little enhancement effect. Based on the characteristics, a sensitive assay for detecting double-stranded DNA in the presence of denatured DNA and yeast RNA has been developed. The enhancement of the RRS signal is directly proportional to the concentration of double-stranded DNA in the range 0.02-12.0 μg ml⁻¹ for calf thymus DNA and its detection limit (3σ) is 2.5 ng ml⁻¹. The method shows a wide linear range and high sensitivity, and almost no interference can be observed from RNA, denatured DNA, amino acid and most of the metal ions. The trace amounts of nucleic acid in synthetic samples and practical samples are determined with satisfactory results. Therefore, the proposed method is promising for as an effect means for recognition in vivo and determination in situ of double-stranded DNA.     

季铵盐用于示波极谱滴定法测定培氟沙星和环丙沙星

介绍采用季铵盐 十六烷基三甲基溴化铵作滴定剂的示波极谱滴定法测定培氟沙星和环丙沙星含量的方法。在pH 4 .8HAc NaAc缓冲溶液中 ,培氟沙星和环丙沙星均能与四苯硼钠 (Na TPB)作用生成沉淀 ,干过滤后 ,用十六烷基三甲基溴化铵标准溶液代替在示波极谱滴定法中常用的有毒硫酸亚铊作为滴定剂 ,回滴滤液中过量的Na TPB ,由示波极谱图 [dE dt=f(E)曲线 ]上TPB的切口消失指示终点。本法终点直观、灵敏 ,操作简便、快速 ,应用于多批原料药样品的测定 ,均获得满意的结果 ,其回收率在 99.9%～ 10 0 .3%之间 ,最大相对误差 <± 0 .3% ,与非水滴定法测得结果基本吻合。     

缓慢炭化部分氧化对制备煤质活性炭的影响

研究了炭化升温速度、炭化低温区引入空气部分氧化对活性炭制备过程中炭化阶段、炭化物结构、活性炭性能等的影响。结果表明，炭化时低温部分氧化可提高炭化物得率，使炭化物微晶的ｄ００２值升高和Ｌｃ值减小；而较慢的炭化升温速度有利于制备优质活性炭。缓慢炭化、部分氧化可以在一定程度上控制炭化路径，使炭化向生成取向性差、难石墨化、各向同性、呒定形炭多的炭化物的方向进行；并讨论了它们控制炭化的作用机理。以此为指导，     

Preparations of ginsenoside Rg1 immunogen and125I-labeled antiğen

This work began with the side chain of ginsenoside Rg₁ which was acetylized with Ac₂O-Pyr and oxidized by OsO₄ and NaIO₄ to give ginsenoside Rg₁ aldehyde(2), which was further converted into an unsaturated ester(3) by Wittig-Horner reaction. The unsaturated ester(3) was treated with N₂H₄ and HNO₂ to yield Rg₁ azide(4) which was directly conjugated with BSA to give immunogen: ginsenoside Rg₁-BSA conjugate(5). This azide(4) was conjugated with tyramine to give ginsenoside Rg₁-tyramine conjugate which was labelled with free Na¹²⁵I by CH-T to yield¹²⁵I-labeled antigen: gensenoside Rg₁-¹²⁵I-tyramine(6). The labelling rate was 40%–50% and specific activity was 3.0–4.0 MBq/g.