CdS修饰玻碳电极电化学发光法检测三聚氰胺

本文将CdS纳米棒修饰到玻碳电极上制作了CdS修饰玻碳电极(CdS/GCE)并研究了其在K2S2O8溶液中的电化学发光(ECL)性能.基于三聚氰胺能淬灭CdSK2s2O8电化学发光的性质建立了一种检测三聚氰胺的方法.在最优条件下,体系的ECL强度与三聚氰胺浓度在1.0×10-9～1.0×10-7 mol/L范围内与EC...     

四溴代对苯二甲酸根及二吡啶基丙烷构筑的锌(Ⅱ)及镉(Ⅱ)配位聚合物的合成及晶体结构

在室温和甲醇/水溶液为溶剂的条件下,以四溴代对苯二甲酸(H2TBTA)及1,3-二(4-吡啶基)丙烷(BPP)为配体合成了[Zn(TBTA)(BPP)]n(1)和[Cd(TBTA)(BPP)2(H2O)2]n(2)2个配位聚合物,对其进行了X-射线单晶衍射、元素分析、红外光谱分析和热重等性质表征。结果表明:配合物1为二维(2D)层状网络结构;配合物2为一维(1D)链状结构;H2TBTA配体中的羧基都采取单齿模式与金属离子配位;配合物中的氢键作用对其结构的稳定性起关键作用。     

电感耦合等离子体原子发射光谱法(ICP-AES)测定金鸡胶囊中的7种无机元素

建立了测定金鸡胶囊中Ca、Mg、Mn、Fe、Cu、Zn和Sr 7种无机元素含量的分析方法.采用浓硝酸和高氯酸(8+2)的混合酸溶解样品,利用电感耦合等离子体原子发射光谱法(ICP-AES)对各种元素进行测定.金鸡胶囊含有丰富的对人体有益的无机元素,对待测样品的测定结果表明,Ca、Mg、Fe、Mn、Zn、Sr和Cu的含量...     

2-[(4-氯苯基亚氨基)甲基]-8-羟基喹啉质子转移的理论研究

研究了2-[(4-氯苯基亚氨基)甲基]-8-羟基喹啉的三种质子转移途径: 分子内质子转移、水分子辅助质子转移和甲醇分子辅助质子转移. 以该席夫碱化合物的晶体结构作为模型, 在B3LYP/6-31＋G(d)水平上, 优化得到稳定态和过渡态的几何构型. 对三类质子转移前后的结构、能量、红外光谱、化学位移进行研究, 结果表明水分子辅助质子转移和甲醇分子辅助质子转移中, 水和甲醇分子利用氢键作用参与质子转移过程, 形成七元环状过渡态, 大大降低了反应的能垒, 有利于质子的转移, 氢键在降低活化能方面起着重要作用.     

含有三氟乙烯基芳基醚侧基的聚丙烯酸酯的合成与表征

研究了聚丙烯酸酯侧基上引入三氟乙烯基芳基醚结构单元的方法. 首先, 合成了含有三氟乙烯基芳基醚侧基的丙烯酸酯单体, 然后通过原子转移自由基聚合实现了该单体的均聚和无规共聚, 得到了含有三氟乙烯基芳基醚侧基的聚丙烯酸酯聚合物, 聚合物的分子量分布较窄. 通过控制共聚投料比, 可以得到具有不同含量三氟乙烯基芳基醚侧基的无规共聚物.     

Preparation of PEO-b-PPO-b-PEO/α-cyclodextrin supramolecular hydrogels hybridized with exfoliated graphite nanoplates

Abstract

In this work, an effective method was developed to prepare novel PEO-b-PPO-b-PEO (EPE)/α-cyclodextrin (α-CD) supramolecular hydrogels containing exfoliated graphite nanoplates (xGNPs) by mixing an aqueous solution of α-CD with an aqueous dispersion of xGNPs at the presence of amphiphilic EPE copolymer. The EPE copolymer played three important roles in the preparation process: (1) as an exfoliating agent to break expanded graphites into xGNPs under ultrasonication, (2) as a dispersant to stabilize xGNPs in the aqueous solution, and （3）as a component to form the inclusion complexes with α-CD. The resultant xGNPs/EPE/α-CD hybridized hydrogels were characterized by scanning electron microscopy, wide-angle X-ray diffraction, differential scanning calorimetry, and Fourier transform infrared spectroscopy, which confirmed not only the formation of supramolecular hydrogel structure but also the homogenous dispersion of xGNPs in the hydrogel matrix. It was found that the existence of xGNPs can accelerate the speed of gel formation in comparison with that of the native EPE/α-CD hydrogel. Additionally, the water-retention ability and the release behavior of vancomycin hydrochloride for the xGNPs/EPE/α-CD hybridized hydrogels were investigated.     

离子色谱法测定复方卡托普利片中卡托普利和氢氯噻嗪的含量

建立离子色谱法测定复方卡托普利片中卡托普利和氢氯噻嗪含量的方法。在色谱柱为IonPacSCS1(4mm×250mm),保护柱为IonPacSCG1(4mm×50mm),淋洗液为甲烷磺酸(4mmol/L)+乙腈(26%),流速1.0mL/min,柱温35℃,进样量7μL,紫外检测波长215nm的条件下,测定结果表明,卡托普利和氢氯噻嗪在0.5～25μg/mL范围内线性关系良好,相关系数r分别为0.9997、0.9999,回收率分别为98.11%、94.24%。方法操作简单,灵敏度高、准确、重现性好,可用于复方卡托普利片的质量控制。     

一种腙水解合成醛(酮)的绿色化学方法

腙与二水合氯化铜在80%乙腈溶液中回流反应1 h～3 h,高收率地制得相应的醛(酮)。实现了铜盐的循环使用,符合绿色化学理念。     

锂离子电池正硅酸盐正极材料研究进展

正硅酸盐正极材料因其高理论容量、高安全性能、低成本及环境友好等优点,近几年引起研究者的广泛关注.本文综述了国际上正硅酸盐材料最新研究进展.结合本课题组在该领域的研究,着重从此类材料的合成方法、结构研究、电化学性能及反应机理等方面进行阐述.综合分析正硅酸盐材料各种合成方法的优缺点、结构研究存在的争议以及性能和机理研究上的...     

Measurement of D(d,p) T Reaction Cross Sections in Sm Metal in Low Energy Region (10≤Ed≤20keV)

To study the screening effect of nuclear reactions in metallic environments, the thick target yields, the cross sections and the experimental S(E) factors of the D(d,p)T reaction have been measured on deuterons implanted in Sm metal at 133.2K for beam energies ranging from 10 to 20keV. The thick target yields of protons emitted in the D(d,p) T reaction are measured and compared with those data extrapolated from cross sections and stopping power data at higher energies. The screening potential in Sm metal at 133.2K is deduced tobe 520±56eV. As compared with the value achieved in the gas target, thecalculated screening potential values are much larger. This screening potential cannot be simply interpreted only by the electron screening. Energy dependences of the cross section σ(E) and the experimental S(E) factor for D(d,p)T reaction in Sm metal at 133.2K are obtained, respectively.