Rapid Synthesis of Lead Oxide Nanorods by One-step Solid-state Chemical Reaction at Room Temperature

A simple and facile method was reported to synthesize lead oxide nanorods. Nanorods of lead oxide were obtained directly from grinding solid metal salt and sodium hydroxide in agate mortar with the assistance of a suitable nonionic surfactant in only one step, which is different from the result of hydroxide in solution. The product has been characterized by XRD, TEM and SEM. The formation mechanism of rod-like morphology is discussed and the surfactant plays an important soft-template role in modifying the interface of solid-state reaction and according process of rod-formation.     

THE SYNTHESIS OF MODIFIED DIPHENYL OXIDE RESIN

1. INTRODUCTION Poly (diphenyl oxide) (DPO) resins are a series of heat-resisting thermosetting resins. In 1960s, the West House Company applied them to make H class insulting materials and got an extensive use successfully [1]. But due to the three main…     

硫堇褪色光度法测定微量肝素

在pH 4.10的Britton-Robinson缓冲溶液中,肝素与碱性吩噻嗪染料硫堇形成离子缔合物时,染料发生明显的褪色。体系吸光度的降低与肝素钠浓度成正比,肝素的质量浓度在0~60μg/25 mL范围内符合比耳定律,摩尔吸光系数为3.58×106L.mol-1.cm-1。研究了表面活性剂和共存物质的影响,表明方法选择性好。用于肝素钠注射液效价的测定,相对标准偏差小于3%,回收率为96.5%~101.9%。     

1,4-双(4''''-溴苯酰基)苯的合成工艺改进

以对苯二甲酰氯和溴苯为原料,无水氯化铝粉末为催化剂,合成了1,4-双(4'-溴苯酰基)苯,其结构经1H NMR,IR和DSC表征.     

The Self-catalytic Esterification Reaction of O-Phosphoryl Serine Derivative

O-Phosphoryl serine derivative can perform serf-catalytic esterification reaction in the mixture of CH3OH and CHCl3 at the room temperature. The phosphoryl group participation was the key step of the esterification. This type of reactions were proposed through an intermediate of mixed phosphoric-carboxylic anhydride that might provide a clue to the function of the phosphoryl group in the phosphorylated enzymes and in the prebiotic synthesis of protein.     

TiO2-SiO2光催化纸业废水有色有机物的降解

研究了TiO2-SiO2混合氧化物对纸业废水中有色有机物的吸附与光催化降解效率．常温下．TiO2对纸业废水中有色有机物的吸附符合Freundlich模型，Qe=0．239Ce^0.791。TiO2-SiO2混合氧化物对纸业废水中有色有机物的吸附与光催化降解效率与催化剂样品的组成有关，光催化降解效率也与TiO2-SiO2表面总酸量有关．     

二芳基乙烯类光致变色材料的合成概述

由于具有多种潜在的应用价值, 光致变色化合物作为高级功能材料的研究在国内外广受关注. 在众多的有机光致变色化合物中, 二芳基乙烯特别是二噻吩乙烯, 由于其具有良好的热稳定性和优良的耐疲劳度而成为这类化合物的杰出代表. 近年来, 有关二芳基乙烯类光致变色化合物的各种合成及性能方面的报道已涉及到信息存储、分子开关、逻辑电路、液晶显示、磁性材料等众多领域. 主要是从有机合成的角度, 对这类材料的合成进行了较为全面的概括, 对各种合成方法分别加以介绍和分析, 对其发展趋势予以探索和展望.     

变温红外光谱研究多嵌段聚氨脂脲的微相分离行为

用傅里叶变换红外光谱方法研究了热处理对由聚环氧丙烷聚醚多元醇、３．５－二乙基甲苯二胺和４，４－二苯基甲烷二异氰酸酯组成的多嵌段聚氨酯脲（ＳＰＵＵ）的微相分离行为的影响．从室温逐步升温到３１０℃的过程中，氨基甲酸酯键（ＵＴ）之间形成的氢键大量解离，而脲键（ＵＡ）之间形成的、具有平面状双分叉结构的氢键在１３０～２００℃范围却大量生成；从３１０℃缓慢冷却到室温后，部分游离的ＵＴ重新形成氢键，而硬段之间形成的ＵＡ氢键的含量又有所增加．结果表明：高温热处理可以有效地提高ＳＰＵＵ的微相分离程度．     

三元合金Cu76Ni15Sn9的离子溅射研究

在２７ｋｅＶ Ａｒ⁺离子轰击时,用收集膜技术结合俄歇谱仪（ＡＥＳ）,研究了三元合金Cu₇₆Ni₁₅Sn₉系统的择优溅射行为。同时使用扫描电子显微镜（ＳＥＭ）与电子探针微分析（ＥＰＭＡ）．观察了靶点表面形貌变化并测定了形貌特征微区的合金组份原子的相对百分浓度。结果表明,Ｃｕ原子较Ｎｉ原子、Ｎｉ原子较Ｓｎ原子,在所测定范围（０─６０°）内择优发射。最后讨论了靶点表面形貌特征和“元素局域富集”现象对择优溅射过程的影响。 关键词：     

HIGHLY SENSITIVE SPECTROPHOTOMETRY OF NIOBIUM

In pH2.0-3.0,niobium(V)forms molybdonlobic acid with sodiummolybdate.A spectrophotometric method has been developed for the deter-mination of niobium based on the formation of ion-associate compound ofmolybdoniobate with Butyl Rhodamine B in aqueous solution in the presenceof polyvinyl alcohol and 0.4-0.7 mol/L H_2SO_4.The maximum absorption ofion-associate compound exhioits at 85 nm and the molar absorptivity is7.5×1.0~5 L.mol~(-1).cm~(-1)for niobium.The new method has been applied tothe determination of microamounts niobium in silicate rock,when niobiumcontent is at the level of 8×10~(-3)%,with the relative standard deviationof about 3%.