Synthesis of Calix [4] resorcinarene Core Dendrimers with Peripheral Salicylideneimine Functional Groups

IntroductionOver the past two decades, dendrimers have at-tracted considerable attention because of their inherentnovel structural features and their potential applicationsin various scientific and industrial fields such as cataly-sis or newmaterials, and…     

高比能LiFePO4的制备及性能研究

应用液相沉淀法-固相烧结法制备高密度的LiFePO4/C及纯相LiFePO4.X射线衍射、扫描电镜、傅立叶红外光谱仪、电化学性能测试表明:该样品具有单一的橄榄石结构和3.4 V左右的放电平台,掺碳的LiFe-PO4具有更优良的性能,粒度较小粒径分布均匀,振实密度达1.46 g/cm3,0.1C首次放电比容量为144.6mAh/g,循环20次后容量保持率为93.2%,1C倍率首次放电比容量为133.5 mAh/g,循环20次后容量下降8.76%.     

Flexible Liquid Crystal Polymer Technologies from Microwave to Terahertz Frequencies

With the emergence of fifth-generation (5G) cellular networks, millimeter-wave (mmW) and terahertz (THz) frequencies have attracted ever-growing interest for advanced wireless applications. The traditional printed circuit board materials have become uncompetitive at such high frequencies due to their high dielectric loss and large water absorption rates. As a promising high-frequency alternative, liquid crystal polymers (LCPs) have been widely investigated for use in circuit devices, chip integration, and module packaging over the last decade due to their low loss tangent up to 1.8 THz and good hermeticity. The previous review articles have summarized the chemical properties of LCP films, flexible LCP antennas, and LCP-based antenna-in-package and system-in-package technologies for 5G applications, although these articles did not discuss synthetic LCP technologies. In addition to wireless applications, the attractive mechanical, chemical, and thermal properties of LCP films enable interesting applications in micro-electro-mechanical systems (MEMS), biomedical electronics, and microfluidics, which have not been summarized to date. Here, a comprehensive review of flexible LCP technologies covering electric circuits, antennas, integration and packaging technologies, front-end modules, MEMS, biomedical devices, and microfluidics from microwave to THz frequencies is presented for the first time, which gives a broad introduction for those outside or just entering the field and provides perspective and breadth for those who are well established in the field.     

EAST位形磁流体平衡的模拟

对托卡马克平衡反演数值计算代码EFIT进行了改进,使之适用于EAST装置的磁流体平衡研究.用改进后的平衡反演代码EFIT模拟了EAST装置稳态阶段的偏滤器平衡位形.提出极向场线圈电流作为线性方程组主约束条件,期望位形作为从约束条件,求解非对称电流条件下自由边界平衡问题的方法.结果表明,该方法能较为容易地得到非对称电流条件产生的平衡位形,在非对称电流条件下自由边界平衡计算是收敛的.     

非定常膨胀过程中水蒸汽凝结对流场影响的数值分析

采用数值目的对激波管非定常膨胀过程中,汽液相变与流场的相互作用进行了模拟.主要研究了含有水蒸汽的混合气体在激波管中的非平衡凝结过程以及其对流场的作用.结果表明由于水蒸气的凝结释放热量对流场局部进行加热,使流场参数发生扰动而产生凝结激波.经过与凝结激波的相互作用后,流场参数和结构将发生明显的变化.     

利用沙漠沙低温合成高长径比莫来石晶须

利用沙漠沙独特的化学组成特性和矿物特性,将沙漠沙荒料作为硅源,工业Al(OH)3作为铝源制备莫来石晶须.改变硅源/铝源配比和合成温度,结合XRD、SEM、TEM研究莫来石生长环境和自由生长形态的变化.研究结果表明:当沙漠沙与Al(OH)3的质量比为35/65时,在1200℃的低温下就能获得平均值>60的高长径比莫来石晶须;随着煅烧温度的升高,莫来石晶须长径比不断增大,当温度升至1300℃,平均长径比>94.随着合成温度的升高,莫来石的形成经过了一次莫来石和二次莫来石化两个阶段;若配方中Al2 O3处于过饱和状态,样品中刚玉相会随着煅烧温度的升高出现先增多后降低的变化现象.     

在线服务风险管理的蚁群优化算法

互联网环境下的在线服务运营管理应该先进行项目风险规划.针对在线服务企业的风险管理规划问题,提出了一种蚁群优化风险管理算法.该方法能够通过优化组合项目及风险处理措施,以最优的净收益值确定服务目标及风险防范措施,达到在线服务收益最大和风险代价最低的目标.     

分数阶Duffing混沌系统的动力性态及其由单一主动控制的混沌同步

随着物理与技术的深入研究,分数阶非线性系统的动力性态及其分数阶混沌系统的同步成为研究的焦点.研究了分数阶Duffing系统的动力性态包括混沌性质,并且由分数阶非线性稳定性准则得到了分数阶非自治系统的混沌同步.特别地,研究了由单一主动控制的分数阶Duffing系统的同步.相应的数值结果演示了方法的有效性.     

带有控制-状态混合约束的时滞Volterra型积分系统的最优控制问题

对带有控制-状态混合约束的一类受控时滞Volterra型积分系统,导出了其最优控制的一组必要条件和一组充分条件．     

反应扩散方程的渐近吸引子

本文考虑了反应扩散方程的渐近吸引子，即构造了一个有限维解序列。首先利用数学归纳法证明了该解序列不会远离方程的整体吸引子，其次证明了它在长时间后无限趋于方程的整体吸引子，并且给出了渐近吸引子的维数估计。