Catalytic,Enantioselective α‐Alkylation of Azlactones with Nonconjugated Alkenes by Directed Nucleopalladation

A palladium(II)‐catalyzed enantioselective α‐alkylation of azlactones with nonconjugated alkenes is described. The reaction employs a chiral BINOL‐derived phosphoric acid as the source of stereoinduction, and a cleavable bidentate directing group appended to the alkene to control the regioselectivity and stabilize the nucleopalladated alkylpalladium(II) intermediate in the catalytic cycle. A wide range of azlactones were found to be compatible under the optimal reaction conditions to afford products bearing α,α‐disubstituted α‐amino‐acid derivatives with high yields and high enantioselectivity.     

表面增强拉曼光谱法分析软饮料中的阿斯巴甜

应用超声技术辅助预处理,以纳米银为活性基底,在溶液pH 5.0、纳米银与阿斯巴甜(APM)混合比例1∶1、混合温度30℃、加热时间6 min的条件下,利用表面增强拉曼光谱(SERS)结合化学计量法对纯品及软饮料中APM进行定量检测。结果表明:APM在0.5～100 mg/L范围内线性关系较好,其中水标准溶液的相关系数为0.993 3,检出限(LOD)为0.41 mg/L,苏打水、雪碧、可乐、芬达等标准溶液的相关系数为0.974 7～0.984 8,加标平均回收率为88.4%～121%,相对标准偏差小于7%。运用SERS检测软饮料中APM具有分析速度快、无损、环境污染小等优点,适用于食品中阿斯巴甜的定量分析,为食品添加剂的进一步表征和检测建立了依据,显示了SERS技术在化学物质检测领域具有巨大潜力。     

Bacillus licheniformis peptidoglycan characterization by CZE–MS: Assessment with the benchmark RP‐HPLC‐MS method

Peptidoglycan or murein is an essential polymer found in bacterial cell wall. It is a dynamic structure that is continuously remodeled or modified during bacterial cell growth or in presence of cell wall stresses. These modifications are still poorly understood mainly due to the peptidoglycan, which is rather non‐soluble, and the difficulties to separate the hydrophilic glycopeptides (muropeptides) by reversed phase liquid chromatography, generated by the enzymatic digestion using mutanolysin, an N‐acetyl‐muramidase, cleaving the β_1→4 bound between N‐acetylglucosamine and N‐acetylmuramic acid. Here, we report the use of CZE–MS for an easy and fast screening of muropeptides generated by the action of muramidase on the Bacillus licheniformis cell wall. Electron transfer and CID–MS were also used to unambiguously identify and localize the presence or the absence of amidation and acetylation moieties on muropeptide variants. The reference method to analyse muropeptides by reversed phase chromatography was also tested and the advantages and disadvantages of both methods were evaluated.     

Terpolymers from Borane‐Initiated Copolymerization of Triphenyl Arsonium and Sulfoxonium Ylides: An Unexpected Light Emission

The first synthesis of well‐defined poly[(phenylmethylene‐co‐methylpropenylene)‐b‐methylene, [(C1‐co‐C3)‐b‐C1], terpolymers was achieved by one‐pot borane‐initiated random copolymerization of ω‐methylallyl (C3 units, chain is growing by three carbon atoms at a time) and benzyltriphenylarsonium (C1 units, chain is growing by one carbon atom at a time) ylides, followed by polymerization of sulfoxonium methylide (C1 units). Other substituted arsonium ylides, such as prenyltriphenyl, propyltriphenyl and (4‐fluorobenzyl)triphenyl can also be used instead of benzyltriphenylarsonium. The obtained terpolymers are well‐defined, possess a predictable molecular weight and low polydispersity (M_n,NMR=1.83–9.68×10³ g mol^?1, ?=1.09–1.22). An unexpected light emission phenomenon was discovered in these non‐conjugated terpolymers, as confirmed by fluorescence and NMR spectroscopy. This phenomenon can be explained by the isomerization of the double bonds of allylic monomeric units along the chain of the terpolymers (isomerization‐induced light emission).     

镍纳米粒子修饰碳糊电极直接电催化鸟嘌呤的研究

将镍纳米粒子与石蜡、石墨按照一定比例混合制备镍纳米粒子修饰碳糊电极,采用循环伏安法(CV)对修饰碳糊电极进行电化学表征,在0.1 mol/L B-R缓冲溶液(pH4.5)中研究了鸟嘌呤在该修饰电极上的电化学行为。结果表明,与裸碳糊电极相比,以掺杂法制备的镍纳米粒子修饰电极能够明显降低鸟嘌呤的过电位,增大其氧化电流,很好地催化氧化鸟嘌呤。在优化的实验条件下,鸟嘌呤在该修饰电极上的氧化峰电流与其浓度在1.0×10-5~5.0×10-4mol/L范围内呈良好的线性关系,检出限(3σ)为7.5×10-6mol/L。     

亚硝酰硫酸的离子色谱分析方法研究

建立了离子色谱法(IC)测定亚硝酰硫酸含量的分析方法。考察了亚硝酰硫酸选择性水解生成硝酸和硫酸的条件。亚硝酰硫酸的最佳色谱分析条件为:电导检测器,pH3.5的磷酸二氢钾缓冲溶液作流动相,流速1 mL.min-1,柱温45℃。在优化实验条件下,NO2-、NO3-和SO42-的线性范围分别为2.375~9.515、0.375~1.548、2.051~8.263 mmol.L-1,相关系数均大于0.999 9。样品中NO2-、NO3-和SO24-的加标回收率为99%~101%,其相对标准偏差(RSD)均小于1.0%。通过对各离子含量的测定,用氮平衡法计算出亚硝酰硫酸的含量,相对标准偏差均在0.1%以内。建立的方法与传统的氧化还原滴定法分析亚硝酰硫酸相比,具有分析结果准确、简便快速、成本低的特点,已用于工厂中该产品的质量控制。     

阴离子树脂苯取富集-分光光度法测定煤矸石中痕量钪

研究了对乙酰基偶氮氯膦(CPApA)与钪(Ⅲ)的显色反应,在HNO3介质中,在Triton X-100存在下,CPApA与钪(Ⅲ)反应生成摩尔比为1:1的稳定配合物,该配合物可用717型阴离子树脂交换柱萃取富集,再通过树脂相光度法测定钪,由此建立了测定钪的新方法.吸附配合物树脂相的最大吸收波长为690 nm,表观摩尔吸光系数为9.56×105 L·mol-1·cm-1.钪的质量浓度在0～480μg/L范围内符合比耳定律.经阴离子树脂交换柱萃取富集后,钪的测定灵敏度可提高数倍,大多数常见离子不干扰测定.方法应用于煤矸石痕量钪的测定,结果满意.样品分析结果的相对标准偏差小于5%,加标回收率为96.0%～102.5%.     

传染性单核细胞增多症患儿微量元素分析

为探讨微量元素与传染性单核细胞增多症的关系,对30例传染性单核细胞增多症患儿及30例健康儿童进行了全血6种微量元素检测分析。结果表明,传染性单核细胞增多症患儿的全血锌、铁含量低于健康儿童(P0.05),而血铜、钙、镁、铅等无明显变化。提示传染性单核细胞增多症患儿部分微量元素含量存在异常。     

球磨改性对(Ti Cr)_(0.497)V_(0.42)Fe_(0.083)/30%(w)(LaRMg)(NiCoAl)_(3.5)合金复合电极材料储氢和电化学性能的影响

以钒基合金(Ti Cr)0.497V0.42Fe0.083为基体,添加30%(w)稀土系A2B7型合金(LaRMg)(NiCoAl)3.5为电催化活性材料,采用机械球磨改性制备了储氢合金复合电极材料,研究其储氢特性和电化学性能.X射线衍射(XRD)、扫描电镜(SEM)和透射电子显微镜(TEM)分析结果表明,随球磨时间增加(t=0,0.5,1,3,5,10h),复合材料颗粒逐渐细化,A2B7型合金颗粒分散并包覆在钒基合金表面上;当球磨时间t≥5h时,复合材料形成明显的复合纳米晶组织并伴有部分非晶化倾向,同时钒基合金BCC相结构的晶胞参数a和晶胞体积V均明显减小.合金储氢特性及电化学性能分析测试结果表明,铸态纯钒基合金的吸氢量为3.11%(w),而球磨复合材料的储氢量随球磨时间增加呈减小的规律,其最大储氢量为2.47%(w);球磨改性后,复合材料电极的电催化性能得到明显改善,当球磨时间t≥3h时最大放电容量达到425.8mAh·g-1,经100次充放电循环后该电极的容量保持率(C100/Cmax)为97%,表现出良好的电极循环稳定性.     

溶剂散逸自组装制备超疏水针垫阵列膜

利用溶剂散逸自组装方法,以聚苯乙烯、聚十二烷基丙烯酰胺-6-丙烯酰胺基己酸（CAP）和三氯甲烷为原料,在平滑的固体基质上制备了有序多孔膜,该膜上下表面可在外力作用下发生分离,得到具有微米级超疏水针垫阵列膜。 结果表明,制得的聚苯乙烯膜具备超疏水性质,与水接触角达158°。