35Cr25Ni12奥氏体耐热钢中碳化物的电子显微分析

应用扫描电镜（SEM）和透射电镜（TEM）研究了长期使用前后的35Cr25Ni12奥氏体耐热钢中的碳化物演变行为；该钢固溶时效后的组织由初晶奥氏体及M23C6共晶碳化物组成，奥氏体基体中析出了二次M23C6，二次碳化物总是与基体保持立方－立方取向关系；长期使用（3、5年）后，奥氏体中析出的二次碳化物量明显增加，部分M23C6已转变为M6C，M6C与奥氏体基体以及二次碳化物M23C6保持[001]M6C//[221]A//[221]M23C6孪晶取向关系。     

四羧基锰酞菁作为超氧化物歧化酶和过氧化物酶模拟酶的研究

用核黄素 蛋氨酸光照法和黄嘌呤氧化酶 细胞色素C还原法证实,在1.0×10-6～1.0×10-5mol/L范围内四羧基锰酞菁(TcPcMn)表现出良好的清除超氧阴离子自由基(O—·2)的活性;用黄嘌呤氧化酶 NBT还原法测算出的TcPcMn清除O—·2的二级反应速率常数为7.77×105mol-1·L·s-1,表明TcPcMn作为超氧化物歧化酶(SOD)模拟酶能很好的抑制O—·2的还原性.TcPcMn既能催化H2O2与4 氨基安替比林和酚的显色反应,也能催化邻苯二胺的聚合,表明TcPcMn具有过氧化物酶(POD)活性.用邻苯三酚自氧法得出,TcPcMn将O—·2的氧化性转化成了POD和H2O2的氧化性.因此只要牺牲一定的POD底物,TcPcMn就可以清除掉因歧化O—·2而产生的H2O2,继而能避免因发生Fenton反应而产生氧化性高于O—·2的羟自由基,从而彻底消除O—·2的氧化性,与SOD相比,这是TcPcMn的一个优势.     

Na离子和Cl离子引起He原子直接多重电离过程的研究

利用2～8 MeV的Naq+、Clq+(q=2,3,4,5)轰击氦原子,对碰撞的直接多重电离过程进行研究.实验采用反冲离子-散射离子飞行时间符合技术,通过反冲离子飞行时间谱区分不同价态反冲离子;利用静电偏转和位置灵敏探测技术区分不同电荷态散射离子;结合CAMAC-PC多参数获取系统得到一定价态散射离子所对应的反冲离子电荷态分布谱;经分析该谱得到直接多重电离截面与直接单电离截面之比R21.讨论了R21随入射离子速度和电荷态的变化关系.     

Rigorous Generalization of Young's Law for Heterogeneous and Rough Substrates

We consider a SOS type model of interfaces on a substrate which is both heterogeneous and rough. We first show that, for appropriate values of the parameters, the differential wall tension that governs wetting on such a substrate satisfies a generalized law which combines both Cassie and Wenzel laws. Then in the case of an homogeneous substrate, we show that this differential wall tension satisfies either the Wenzel's law or the Cassie's law, according to the values of the parameters.     

Photochromic reverse mode polymer dispersed liquid crystals

Control of light intensity and colour are two of the major features required in the realization of smart windows. We designed a bi-functional polymer dispersed liquid crystal (PDLC) film in order to satisfy such requirements, i.e. it is able both to modulate the optical transmission, if an external electric field is applied, and to change colour if exposed to sunlight. A monomer/liquid crystal mixture was doped with a small amount of photochromic material and homeotropically aligned by means of rough surfaces. A transparent and pale pink coloured film was achieved after photopolymerization. Such a film changes colour upon exposure for some seconds to sunlight or ultraviolet radiation in a persistent but reversible manner. In addition, the film appears transparent without the application of an electric field (OFF state) and becomes opaque on application of a driving voltage of about 75 V (ON state), and thus the film operates in reverse mode with respect to conventional PDLCs.     

群体决策的偏好协调性检验

对于一类群体决策问题，本文引进群体的偏好协调性指标，并且给出了偏好协调性指标的统计检验．在此基础上，还提出一个求该类群体决策问题的方法，以及讨论了群体的偏好快调性指标和群体决策结果间的关系．     

Some classes of non general type codimension two subvarieties inP n

We classify smooth subvarieties of codimension twoX⊂P ⁿ , 4≤n≤5, which are arithmetically Cohen-Macaulay and of non general type. By the way we exhibit some classes of non extendable subvarieties. Then we give new proofs of the classification of scrolls inP ⁴; finally we consider smooth surfaces of non general type inP ⁴ arising from rank three vector bundles.

---

Sunto Classifichiamo le sottovarietà lisce di codimensione dueX⊂P ⁿ , 4≤n≤5, aritmeticamente Cohen-Macaulay e non di tipo generale. Nel contempo descriviamo alcune classi di sottovarietà non estendibili. Diamo poi due nuove dimostrazioni della classificazione degli scrolls inP ⁴; infine consideriamo superfici lisce inP ⁴, non di tipo generale, associate a fibrati di rango tre.

     

用激光感生荧光法测量亚稳态原子寿命

本文用激光感生荧光法(LIF)分析了Gd原子亚稳态能级215cm~(-1),533cm~(-1),999cm~(-1)在原子束中的速度分布。由原子束轴线上两不同点上的亚稳态原子速度分布的变化得到了亚稳态原子的寿命。理论分析和实验结果表明这是一种简单、灵敏并且有效的亚稳态原子寿命测量方法。     

Mechanosynthesis of YIG and GdIG: A Structural and Mössbauer Study

We have investigated the mechanosynthesis of gadolinium and yttrium iron garnets by high-energy ball-milling of α-Fe₂O₃ and Gd₂O₃ or α-Fe₂O₃ and Y₂O₃, respectively, followed by short thermal annealings conducted at moderate temperatures. The samples were characterized by X-ray diffraction and Mössbauer spectroscopy, in order to determine the influence of the milling time and annealing conditions on the final products. For as-milled samples of each rare-earth system, the results revealed the formation of perovskite phases, in relative amounts that depend on the milling time. The formation of garnet phases was observed in as-annealed samples treated at 1000°C for 2 h or 1100°C for 3 h, i.e., at very modest annealing requirements when compared with ordinary solid-state-reaction processes performed without previous high-energy milling. Also, the occurrence was verified of a milling time for which the relative amount of garnet phases formed by annealing was maximized. This time depends on the rare-earth composing the garnet phase and on the annealing temperature.