A comprehensive study of the long pulse Nd:YAG laser drilling of multi-layer carbon fibre composites

The results of an extensive experimental study of the free running Nd:YAG laser drilling of a multi-layer carbon fibre composite, where adjacent layers have differently orientated fibres, are reported. For holes drilled with the laser operating in fixed-Q mode at 1064 nm, parallel sections of blind holes illustrating discontinuities in the hole size along a given section direction will be shown to occur at the interface between adjacent layers. An explanation for this effect is proposed. Detailed single pulse drilling characteristics will be presented illustrating the exit hole diameter as a function of pulse energy and material thickness. These characteristics illustrate a ‘stable' drilling regime in which the exit hole diameters are least sensitive to changes in pulse energy or material thickness and a less ‘stable' regime in which they are more strongly dependent on these parameters. Drilling characteristics will be given for two different beam qualities, illustrating the greater drilling depth and reduced hole size achievable with an improved beam quality. Finally holes drilled through a 2 mm thick sample of material with multiple pulses are considered. Size distribution curves for entrance and exit holes will be presented. The total energy required (number of pulses × pulse energy) to drill through 2 mm thick material will be reported as a function of pulse energy in stationary air and argon atmospheres and in a partial vacuum, illustrating a threshold energy which is dependent upon the drilling atmosphere. The threshold energies will be discussed with reference to plasma formation and the reactivity of the drilling atmosphere.     

Correlations between dynamical properties and features of potential energy surfaces for the light atom transfer reactions O+HCl→OH+Cl AND Cl+HCl→ClH+Cl

A three-dimensional quasiclassical trajectory study of the dynamics of the light atom transfer reaction O(³P) + HCl(ν=0)→ OH + Cl was carried out employing two LEPS potential energy surfaces (I and II). Attention was focused mainly on three-dynamical properties; the oscillatory behavior of partial cross sections as a function of collision energy; the rotational excitation of the products; and the influence of reagent rotation on reactivity. Distinct differences were found between surfaces I and II with respect to these properties. The examination of individual trajectories indicated that there is a significant difference in the nature of these surfaces. While surface I is governed by weak repulsive forces, surface II is governed by strong attractive forces which tend to direct the reactants toward a collinear geometry. The present results confirm conclusions reached from an earlier study of the reaction Cl+HCl→ClH+Cl concerning correlations between dynamical properties and features of potential energy surfaces. For surfaces of the type that we termed HREP, since they are of repulsive nature and they lead to highly rotationally excited products, no significant oscillations of partial cross sections are obtained and reagent rotation promotes the reaction. On the other hand, for surfaces of the type that we termed COLD (collinearly directing), since they tend to direct the reactants toward a collinear geometry and form rotationally “cold” products, significant oscillations of partial cross sections are obtained and reagent rotation causes a decline in reactivity.     

SiOx纳米管的制备及其发光特性

以液态金属镓为媒介,利用热蒸发法合成大量非晶SiOx纳米管,这些纳米管管径均匀分布,平均约80 nm,长度大于10μm,且管内外径比例较小．分析发现,在实验过程中,熔入金属镓液滴中的硅元素和氧元素结合并从液滴的表面饱和析出,形成以镓为中心的非晶SiOx纳米管状结构．在室温中,利用260 nm的激发光源激发SiOx纳米管,发现在蓝光波段附近发出强而稳定的PL谱线,这可能与样品中的氧缺陷和空位有关．     

K(o)the-Bochner空间的凸性

本文利用K(o)the函数空间的性质以及K(o)the函数空间与K(o)the-Bochner空间的关系,讨论了K(o)the-Bochner空间E(X)的凸性,主要结果如下:(a)给出E(X)的端点的充分条件,得到了E(X)严格凸的判据,相应地推广了Lp(μ,X)以及LΦ(X)的结果;(b)讨论了E(X)的弱局部一致凸和局部完全k-凸;(c)刻画了E(X)的强凸,给出了E(X)强凸的充要条件.     

增湿活化反应器内喷水脱硫试验研究

本文介绍在热态脱硫试验台上进行的生石灰和消石灰的喷水活化脱硫试验,研究了Ca/S比、饱和温距、入口烟气SO2浓度、烟气速度及水喷嘴雾化风对脱硫效率和钙利用率的影响规律,对两种脱硫剂的脱硫活性进行了比较,并对喷水增湿提高脱硫效率的机理进行了分析。研究表明,喷水增湿使两种脱硫剂的活性都有明显提高,生石灰具有价格优势。     

Unified Model for Generation Complex Networks with Utility Preferential Attachment

In this paper, based on the utility preferential attachment, we propose a new unified model to generate different network topologies such as scale-free, small-world and random networks. Moreover, a new network structure named super scale network is found, which has monopoly characteristic in our simulation experiments. Finally, the characteristics ofthis new network are given.     

弱(L_1,L_2)-BLD映射的正则性

本文首先将文［１］中的ＢＬＤ映射推广为弱（Ｌ１，Ｌ２）－ＢＬＤ映射，并证明了如下正则性结果：存在两个可积指数 Ｐ１＝Ｐ１（ｎ，Ｌ１，Ｌ２）＜ｎ＜ｑ１＝ｑ１（ｎ，Ｌ１，Ｌ２），使得对任意弱（Ｌ１，Ｌ２）－ＢＬＤ映射ｆ∈（Ω，Ｒｎ），都有ｆ∈（Ω，Ｒｎ），即ｆ为（Ｌ１，Ｌ２）－ＢＬＤ映射．     

与HBV X蛋白相互作用的细胞蛋白的筛选及其鉴定

参考GenBank核苷酸序列库中的HBV的核苷酸序列设计合成了一对对应于HBx基因的引物，从原发性肝癌(hepatocellular carcinoma，HCC)患者的血清中提取HBV基因组DNA作为模板，扩增HBx编码区并测定了核苷酸序列．将该编码区克隆到酵母双杂交系统的诱饵蛋白表达载体pGBKT7中，转入酵母细胞AH109，进行表型鉴定．然后通过Mating实验从已制备好用于酵母双杂交系统的肝cDNA表达文库中筛选与HBx相互作用的细胞蛋白，并用体外免疫共沉淀实验进一步验证．研究表明，分离得到的与HBx基因编码的蛋白相互作用的4种新的细胞蛋白，分别是醛缩酶B、C8α亚基、一种丝氨酸蛋白酶Hepsin和一种未知蛋白．