端粒酶活性检测研究进展

端粒酶活性检测方法经过近30年的不断改革与发展,取得了巨大突破。该文重点综述了近3年的端粒酶活性检测方法,其中包括化学反应发光法、电化学法、荧光分析法、比色法等,旨在更加全面地了解目前端粒酶活性检测的研究进展,为设计新的端粒酶活性检测方法和克服端粒酶活性检测方法在临床试验中的挑战提供思路。     

NiFe2O4对刚果红的光催化降解性能研究

采用水热法合成了尖晶石型NiFe₂O₄,并利用X射线粉末衍射仪对其物相进行了表征,利用紫外-可见分光光度计对其光催化降解刚果红的性能进行了研究。以刚果红为光催化降解底物,探究了刚果红初始浓度、催化剂用量、溶液pH、不同光源等因素对NiFe₂O₄光催化降解刚果红活性的影响。结果表明,当刚果红溶液浓度为20 mg/L、催化剂NiFe₂O₄的用量为0.065 g、pH 2~10、在太阳光下照射480 min时,刚果红的降解率高达99%以上,催化剂性能稳定,适合处理刚果红类有机污染物。     

微弱日盲紫外电晕自动实时检测方法

针对目前商用日盲紫外/可见光双谱段电晕探测仪对故障的判定效率低且容易受噪声干扰问题,本文提出了一种微弱日盲紫外电晕自动实时检测方法。在分析电晕目标和噪声时间域统计特性的基础上,该方法利用电晕目标在时间域连续的特点,首先完成灰度图像二值化、形态学膨胀等预处理,其次将N帧连续图像累加后阈值化,最后进行特征提取,获取电晕位置、面积等特征信息,实现电晕的自动实时检测。在完成设备辐射标定的基础上,可立即回溯得到故障的光子计数参考值。建立了该方法的探测概率、虚警率数学模型。将其在高速数字处理平台TMS320DM642上实现并输入测试视频,结果表明:在典型参数情况下该方法单次检测虚警概率为2.85×10^-5,处理时间小于120 ms,可实现微弱日盲紫外电晕的实时检测。     

Urothermal Synthesis,Crystal Structure,and Luminescent Property of a New Zn(Ⅱ) Coordination Polymer Constructed from TerephthalicAcid and 5-Methyl-1H-tetrazole Ligands

A new luminescent Zn(II) compound, [Zn(pbdc)0.5(mtz)(DMPU)]n(1, H2pbdc = terephthalic acid, Hmtz = 5-methyl-1H-tetrazole, DMPU = N,N'-dimethylpropyleneurea), has been urothermally synthesized and characterized by elemental analysis, IR, X-ray powder diffraction(PXRD) and single-crystal X-ray diffraction. The title compound crystallizes in orthorhombic Pbca space group with a = 17.2649(5), b = 10.4680(3), c = 17.4457(7) ?, V = 3152.94(18) ?3, C12H17N6O3Zn, Mr = 358.71, Z = 8, Dc = 1.511 g/cm3, F(000) = 1480, μ = 1.579 mm-1, the final R = 0.0379 and wR = 0.0971 for 2785 observed reflections(I 2?(I)). Single-crystal X-ray structural analysis reveals that compound 1 features a 2D undulated layer with a 3-connected hcb topology. Moreover, the luminescent properties of 1 have also been investigated in the solid-state at room temperature.     

Revisiting the Intriguing Electronic Features of the BeOBeC Carbyne and Some Isomers: A Quantum-Chemical Assessment

Extensive high-level quantum-chemical calculations reveal that the rod-shaped molecule BeOBeC, which was recently generated in matrix experiments, exists in two nearly isoenergetic states, the ⁵Σ quintet (⁵ 6 ) and the ³Σ triplet (³ 6 ). Their IR features are hardly distinguishable at finite temperature. The major difference concerns the mode of spin coupling between the terminal beryllium and carbon atoms. Further, the ground-state potential-energy surface of the [2Be,C,O] system at 4 K is presented and differences between the photochemical and thermal behaviors are highlighted. Finally, a previously not considered, so far unknown C_2v-symmetric rhombus-like four-membered ring ³[Be(O)(C)Be] (³ 5 ) is predicted to represent the global minimum on the potential-energy surface.     

空心球状C@SnO2@SnS2的制备及光催化去除Cr（Ⅵ）性能研究

将SnO2负载在碳球上通过不完全烧结的方法得到含有大量碳的空心状C@SnO2,随后加入TAA(硫代乙酰胺),利用离子交换法在水热过程中制备了具有不同硫化程度的空心结构的C@SnO2@SnS2三元复合物。利用XRD、FESEM、TEM、XPS、UV-Vis DRS、PL等测试手段对合成样品进行表征,并测试了其光催化去除Cr(VI)的性能。结果表明,C、SnO2和SnS2三者之间的协同作用以及空心结构的形貌显著增强了SnO2的光催化性能,其中CSS-2样品对Cr(VI)具有最佳的去除能力,太阳光照射120 min后对Cr(VI)的去除率高达98.8%。     

Counter‐Intuitive Gas‐Phase Reactivities of [V2]+ and [V2O]+ towards CO2 Reduction: Insight from Electronic Structure Calculations

[V₂O]⁺ remains “invisible” in the thermal gas‐phase reaction of bare [V₂]⁺ with CO₂ giving rise to [V₂O₂]⁺; this is because the [V₂O]⁺ intermediate is being consumed more than 230 times faster than it is generated. However, the fleeting existence of [V₂O]⁺ and its involvement in the [V₂]⁺ → [V₂O₂]⁺ chemistry are demonstrated by a cross‐over labeling experiment with a 1:1 mixture of C¹⁶O₂/C¹⁸O₂, generating the product ions [V₂¹⁶O₂]⁺, [V₂¹⁶O¹⁸O]⁺, and [V₂¹⁸O₂]⁺ in a 1:2:1 ratio. Density functional theory (DFT) calculations help to understand the remarkable and unexpected reactivity differences of [V₂]⁺ versus [V₂O]⁺ towards CO₂.     

丙交酯合成过程的理论及实验研究

采用密度泛函方法研究了丙交酯的合成过程, 优化了合成过程中可能出现的化合物的几何构型, 分析了各化合物的振动频率和偶极矩. 在B3LYP/6-31G*和B3LYP/6-311＋G*水平上进行了各化合物的能量计算, 得到了所设计的各模型反应的焓变和吉布斯自由能变. 结果表明, 所选择的各模型反应为吸热反应且近似可逆, 水的控制对丙交酯的形成很重要. 根据量化计算结果与丙交酯合成实验中不同阶段反应体系红外谱图的变化, 提出了丙交酯合成的可能机理.     

基于金纳米微粒的化学发光金属免疫分析

建立了基于金纳米微粒溶解的化学发光反应体系,并探讨了金纳米微粒溶解及化学发光测定的最佳条件。首次将金纳米微粒引入生物素和IgG的化学发光金属免疫分析,比较了不同粒径金纳米微粒、不同检测系统对IgG测定的影响。在(一抗-IgG-二抗修饰金纳米微粒)检测系统中,基于10 nm和30 nm金纳米微粒测定IgG的线性范围分别为1~75 ng和0.5~25 ng,检出限分别为0.5 ng和0.1 ng。在(一抗-IgG-生物素化抗体-链霉亲和素修饰金纳米微粒)检测系统中,5 nm和10 nm金纳米微粒测定IgG的线性范围分别为10~250 ng和1~250 ng;检出限分别为5 ng和1 ng。     

Highly effective and chemoselective hydrodeoxygenation of aromatic alcohols

Effective hydrodeoxygenation (HDO) of aromatic alcohols is very attractive in both conventional organic synthesis and upgrading of biomass-derived molecules, but the selectivity of this reaction is usually low because of the competitive hydrogenation of the unsaturated aromatic ring and the hydroxyl group. The high activity of noble metal-based catalysts often leads to undesired side reactions (e.g., saturation of the aromatic ring) and excessive hydrogen consumption. Non-noble metal-based catalysts suffer from unsatisfied activity and selectivity and often require harsh reaction conditions. Herein, for the first time, we report chemoselective HDO of various aromatic alcohols with excellent selectivity, using porous carbon–nitrogen hybrid material-supported Co catalysts. The C–OH bonds were selectively cleaved while leaving the aromatic moiety intact, and in most cases the yields of targeted compounds reached above 99% and the catalyst could be readily recycled. Nitrogen doping on the carbon skeleton of the catalyst support (C–N matrix) significantly improved the yield of the targeted product. The presence of large pores and a high surface area also improved the catalyst efficiency. This work opens the way for efficient and selective HDO reactions of aromatic alcohols using non-noble metal catalysts.

Porous carbon–nitrogen hybrid material-supported Co catalysts can effectively promote the chemoselective hydrodeoxygenation reaction of a various of aromatic alcohols in ethanol and hydrogen atmosphere, under relatively mild conditions.