高浓度多链体系链动力学的Monte Carlo模拟——键长涨落模型和空穴扩散算法

本文在Larson的“键长涨落模型”的基础上提出了模拟高浓度多链体系的新算法。本算法具有如下特征:(1)除通常的微松弛模式外,还直接引入了链的Reptation运动;(2)提出了空穴扩散算法使体系随时间演化。由于本算法的这些新特征,克服了前人的算法不能运用于两维体系以及高浓度多链体系的缺点,同时也大大缩短了计算耗时。应用本文的算法,在44×44的元胞中模拟了链长为21,浓度为0.9545的体系的动力学行为。所得结果与Rouse理论的预言相符合。     

Observation of hydrogen induced intermediate borides in PrFeB based alloys by Mössbauer effect spectroscopy

In the present work, a quantitative analysis of the phase compositions by Mössbauer effect spectroscopy of solid and conventional hydrogen disproportionated Pr_13.7Fe_80.3B_6.0 and Pr_13.7Fe_63.5Co_16.7Zr_0.1B_6.0 alloys was carried out. Significant amounts of intermediate borides t-Fe₃B and Pr(Fe, Co)₁₂B₆ were detected after solid hydrogen disproportionation treatment in Pr_13.7Fe_80.3B_6.0 and Pr_13.7Fe_63.5Co_16.7Zr_0.1B_6.0 alloys, respectively. After conventional hydrogenation–disproportionation–desorption–recombination treatment these phases were not detected and in no case residual Pr₂Fe₁₄B-phase was found. It was observed that the amount of intermediate borides after disproportionation can be correlated with the degree of texture after recombination at various temperatures.     

Monte Carlo Hamiltonian: Linear Potentials

We further study the validity of the Monte Carlo Hamiltonian method. The advantage of the method,in comparison with the standard Monte Carlo Lagrangian approach, is its capability to study the excited states. Weconsider two quantum mechanical models: a symmetric one V(x) = |x|/2; and an asymmetric one V(x) = ∞, forx ＜ 0 and V(x) = x, for x ≥ 0. The results for the spectrum, wave functions and thermodynamical observables are inagreement with the analytical or Runge-Kutta calculations.     

VO2-Based Infrared Microbolometer Array

V0₂-based thin film materials on silicon substrates are fabricated by ion beam sputtering and a post-annealing which is different from the conventional fabricating method. An infrared linear microbolometer array with 128 pixels is prepared using as-deposited vanadium dioxide thin films. Optical and electrical properties for V0₂-based microbolometer array are tested.     

Account of Thermal Flow Through Metal-Semimetal BiSb Contact Boundary for Determination of EHF Detector Volt-Watt Sensitivity

Bismuth, antimony and its alloys are the typical representatives of a class of semimetals, which electric conductance is lower in 10²-10³ times, than of usual well conducting an electrical current metals. The alloys bismuth with antimony have semi-conductor properties in wide area of compositions at temperatures below 77 °K. The semimetals are rather perspective materials from the point of view of their probable application in various devices [1,2,3].In present time the semimetal alloys BiSb have wide application in thermoelectric generators and refrigerators. In work [3] the opportunity of use of semimetals BiSb with percentage content of Bi and Sb from 8 % up to 25 % was shown as high-sensitivity and of small inertion indicators of the mm range radiation where thermoelectric effect is used. The principle of action of such indicators is based on occurrence of temperature gradient in a semimetal crystal BiSb that has two contacts of the various area with flowing electrical current. Basic element of such device is the dot contact metal - semimetal. One of the main characteristics is volt-watt sensitivity of metal-semimetal BiSb contact which calculating is shown in present work.     

格值型Hahn-Dieudonné-Tong插入定理与层次结构

本文将关于半连续函数的Hahn-Dieudoné-Tong插入定理推广到值域为格L的惰形。我们是对格值半连续映射全体形成的拓扑进行考察,将这个问题归结为诱导空间的某种分离性问题来解决的。作为附产品,对相当广大一类格L,证明了诱导空间为正规当且仅当底空间是正规的。反例说明了对乙的限制的必要性。这些结果与反例说明诱导空间的正规性以及格值插入定理成立与值域乙的特征有密切关系。古典的插入定理的证明是分析式的且富有技巧性。与之相比,这里使用的称之为层次结构的新方法则相当朴素而自然。这方法基于对层次之间的拓扑关系有深入的认识。希望这种归纳地给出层次然后定出映射的方法还会得到进一步的应用。     

Effects of stenosis on arterial rheology through a mathematical model

The paper presents an analytical study of blood flow through a stenosed artery using a suitable mathematical model. The artery is modelled as an anisotropic viscoelastic cylindrical tube containing a non-Newtonian viscous incompressible fluid representing blood. The blood flow is assumed to be characterized by the Herschel–Bulkley model. The effect of the surrounding connective tissues on the motion of the arterial wall has been incorporated. Initially, the relevant solutions of the boundary value problem are obtained in the Laplace transform space, through the use of a suitable finite difference technique. Laplace inversion is carried out by employing suitable numerical techniques. Finally, the variations of the vascular wall displacements, the velocity distribution of the blood flow, the flux, the resistance to flow and the wall shear stress in the stenotic region are quantified through numerical computations and presented graphically.