An Efficient Method for the Synthesis of Acyl-diazenes Using NaNO_2/NaHSO_4·H_2O

Azo compounds are widely utilized as analytic reagents and dyes1, they can also be used in material of non-linear optics, material of optics information storing in laser disks, and dyes with oil solubility in photochromy in modern technology2. Recently, many noteworthy studies have shown that some azo compounds possess excellent optical memory and photoelectric properties3,4. For example, polymer scaffolds bearing azobenzene-potential are useful for optical information storage, azo-dye doped…     

Molecular Recognition of Bridged Bis(β-cyclodextrin)s Linked by Phenylenediseleno Tether on the Primary or Secondary Side with Fluorescent Dyes

A Novel β-cyclodextrin dimer,2,2′-o-phenylenediseleno-bridgedbis(β-cyclodextrin)(2),has been synthesized by reaction ofmono-[2-O-(p-tolylsulfonyl)]-β-cyclodextrin and poly(o-phenylenediselenide).The complexation stability constants(K_s)and Gibbs free energy changes(-ΔG°)of dimer 2 with fourfluorescence dyes,that is,ammonium 8-anilino-1-naphthalene-sulfonate(ANS),sodium 6-(p-toluidino)-2-naphthalenesul-fonate(TNS),Acridine Red(AR)and Rhodamine B(RhB)have been determined in aqueous phosphate buffer solution(pH=7.2,0.1 mol·L~(-1)at 25℃ by means of fluorescence spec-     

Synthesis, Structure and Conductivity of the New Charge-transfer Salt (ET)_2(CH_2=CH-CH_2-SO_3)·H_2O

ET is one of the most famous electron-donor molecules, which forms charge-transfer complexes (abbr. CT-complexes) with various types of counterions. These complexes have received intense attention because a wide range of physical properties such as conductivity and superconductivity1, ferromagnetism2-4 and nonlinear optical properties5 was found in these materials. Although the majority of the ET-based CT-complexes were prepared by combining with inorganic counterions, CT-complexes with o…     

Synthesis, Structure and Characterization of [Cu(2,2'-bpy)2][{Cu(2,2'-bpy)2}2W12O40(H2)]·4H2O

An organic-inorganic compound [Cu(2,2'-bpy)2][{Cu(2,2'-bpy)2}2W12O4o(H2)]·4H2O (Mr = 4048.00) was prepared from the hydrothermal reaction of Na2WO4·2H2O, CuCl2·2H2O,2,2'-bipyridine (2,2'-bpy) and H2O at 160 ℃ for 4 days. The compound crystallizes in the monoclinic system, space group P21/n with a = 18.9196(8), b = 20.4212(8), c = 21.8129(9)(A), β=96.992(3)°, V= 8365.0(6) (A)3, Dc= 3.214 g/cm3, Z = 4,μ(MoKα) = 17.269 mm-1 and F(000) = 7324.Of the 119837 total reflections, 17315 were unique (Rint = 0.0489). The final R = 0.0385 and wR =0.0770 for 11142 observed reflections with I ＞ 2σ(I). Single-crystal X-ray diffraction reveals that the structure is composed of [{Cu(2,2'-bpy)2}2W12O40(H2)]2- anions, discrete [Cu(2,2'-bpy)2]2 cations and lattice water molecules, and the anion is made up of a {W12O40(H2)}6- α-Keggin core decorated with two {Cu(2,2'-bpy)2}2 groups through bridging oxygen atoms.     

激光通道传输热特性对远场光束质量的影响

 通过仿真计算分析了激光在光束控制系统通道内传输所产生的热效应及其对远场光束质量的影响。激光传播由近轴波方程描述，用快速傅里叶变换技术求解；激光热效应引起的流场密度变化采用完全Navier-Stokes方程计算。计算给出了不同波长、不同吸收系数条件下的远场光斑情况。计算结果表明，在典型的工作条件和状态下，较高能量激光在光束控制系统通道内产生的热效应影响不容忽视，它会明显降低远场目标处的能量集中度，增大光斑的发散。     

高能闪光照相中影响光程确定的几个因素

 利用闪光照相基本原理和成像原理，在直接记录法和转换屏记录法的情况下，研究了闪光照相中影响X射线在材料中光程确定的主要因素。结果表明，影响光程确定的几个因素是：散射效应、光源角分布效应、立体角效应和能谱效应。对于高能闪光照相，散射效应是影响光程确定的最主要因素，散射的存在使光程的测量值比实际值降低20%～40%。因此必须在做CT之前，对散射的影响进行修正。     

μs级负充电时不同体积分数去离子水与乙二醇混合液电性能的实验研究

 以去离子水与乙二醇的混合液（体积分数分别为36.5%,48.7%,59.0%及71.2%，以下简称混合液）作为同轴传输线的绝缘介质，进行了μs级高电压负充电条件下的正电极击穿实验，研究了混合液的击穿电压、击穿时间、相对介电常数及电阻率与体积分数的关系。实验结果表明：在充电电压为20kV时，71.2%的混合液比36.5%的混合液的平均击穿电压提高25.1%，平均击穿时间延长10.49%，而相对介电常数减小868%。同时，随着充电时间的缩短，混合液的击穿电压提高。     

一种利用窗口结构提取红外弱小目标的方法

在分析红外弱小目标检测的检测概率和虚警率的基础上,引入了一种基于窗口结构的红外弱小目标检测方法.该方法无需进行图像差分,利用局部小范围内目标相对背景的灰度变化检测目标,可以在较低信噪比的情况下获得较高的检测概率和较低的虚警率.实验表明了该方法的有效性.     

探头对共聚焦内窥成像系统层析能力的影响

根据透镜成像规律和单模光纤的传输特性,获得基于单模光纤的共聚焦内窥成像系统轴向光强分布,发现系统的成像过程由于单模光纤的介入呈现非线性,照明光路系统和接收光路系统仅影响系统接收信号的总强度,系统层析能力取决于探头和单模光纤性能.通过建立的共聚焦内窥成像实验装置,测量出在三组不同物镜组合情况下系统的归一化轴向光强分布.结果显示已建立的共聚焦内窥成像系统的理论模型是正确的,扫描光点的定位精度对系统层析能力影响很大,系统设计应该综合考虑光学、机械和电子方面的性能要求.     

分块镜扇形子镜驱动点位置优化计算

在光学综合孔径共相位检测微调系统中,分块镜子镜三自由度微动调节机构通常采用3个并联的微位移致动器来驱动各子镜,使单个分块镜具有独立的姿态调整能力,从而实现了光学共相位误差的纳米级精确校正。以理论力学原理作为切入点展开了分析,针对微动机构的稳定性、tilt-tip调节灵敏度等,根据所给定几何参数的子镜三驱动点位置对其进行了优化计算。经数学建模和仿真计算,得到了定参数子镜的三驱动点最佳位置坐标,进而归纳出了普遍适用的优化评价方法。