全芳香族共聚酯的结构和其液晶行为研究

本文对不同组成的对苯二甲酸(TPA),对羟基苯甲酸(PHBA),联苯二酚(BP),间苯二甲酸(IPA)共聚酯采用热台偏光显微镜、电子显微镜、X-射线衍射、激光小角散射、差热等技术进行了研究.实验结果表明,在一定的组成范围内共聚酯熔体有很好的液晶性.重点讨论了分子组成、转变行为、液晶性的关系,并对液晶相的形态结构进行了表征.     

具可调光学性质的富勒烯聚合物

聚（Ｃ６０ 甲基丙烯酸甲酯）与聚（Ｃ６０ 苯乙烯）的ＴＨＦ溶液的透射光谱随浓度的增大而不断红移．这种异常的光谱位移可能与富勒烯的纳级（１０－９）簇的形成有关．用简单的办法来“调改”一物质的性质是科学家们长期梦寐以求的，而含Ｃ６０的聚合物正代表了这一群新奇的物质，它们的光学性质可以预期地和可逆地调变，只要简单改变一下浓度．     

Affinity Chromatography of Insulin with a Heptapeptide Ligand Selected from Phage Display Library

A heptapeptide phage display library was screened with insulin to find its ligands for affinity chromatography. The peptide was synthesized and coupled to EAH Sepharose 4B (5.4 mol mL^–1 bed). Then, insulin chromatography was carried out with mobile phases of different pH values and by the addition of urea and ethylene glycol. It was found that electrostatic interactions were predominant for the affinity binding, and hydrogen bonding might also contribute somewhat to the affinity. Finally, frontal analysis was performed and the dynamic binding capacity of the affinity column for insulin at 50% breakthrough was estimated at 60.6 mg mL^–1 bed, which was about two times higher than the theoretical binding capacity of the monomeric insulin. The result suggests that insulin was bound in dimer state in a stoichiometric relationship with the coupled peptide, indicating the high binding efficiency of the peptide ligand for insulin.     

FFC-1离子交换纤维物理化学性能的研究

利用扫描电镜、热失重-红外、元素分析、低温氮吸附等技术和化学手段对聚羧酸基FFC-1离子交换纤维的结构与性能特点等进行了系统研究．结果表明：FFC-1离子交换纤维为含适量酰肼类交联键的聚羧酸(钠)型离子交换材料，外比表面积大和传质距离短是其反应动力学性能优异的主要原因，FFC-1纤维具有良好的化学与热稳定性。在5mol/L硫酸、硝酸、盐酸和2mol／L氢氧化钠溶液中浸泡，交换容量未见明显降低。但过氧化氢溶液对其功能基有明显破坏，CO2为FFC-1纤维在高温区间(300℃～350℃)的主要分解产物。     

FFC-1离子交换纤维对酸碱有害气体吸附性能的研究

系统考察了不同直径及反离子形式的FFC-1聚羧酸离子交换纤维对酸碱有害气体的穿透吸附,各种温、湿度条件下的吸水率,以及作为有害气体吸附滤除材料的重复使用与再生性能。研究表明:FFC-1纤维直径的减小有利于提高对有害气体的动态吸附容量。在体系温度、相对湿度分别为15℃、50%时,以3D腈纶为起始原料的钠型FFC-1离子交换纤维的吸水率≥350mg/g.纤维;对SO2的穿透吸附容量可达200mg/g.纤维。FFC-1离子交换纤维具有良好的重复使用与再生能力,经20次再生循环使用后,纤维交换容量未见明显变化。     

废水中偏二甲肼在Ni/Fe催化剂上的催化分解研究

研究了Ni/Fe催化剂对废水中偏二甲肼臭氧化分解的催化作用,考察了组分含量、体系的pH值和偏二甲肼初始浓度对催化反应的影响.结果表明,Ni/Fe催化剂对水中偏二甲肼的臭氧化具有良好的催化活性.催化剂组分含量、体系的pH值和初始浓度对反应的影响程度不大.对催化剂的XRD表征结果表明,催化剂主要由尖晶石结构的铁酸盐和FeNi3合金相组成,催化剂的良好催化性能与催化剂中尖晶石结构的铁酸盐和FeNi3合金相的形成有关.     

2,4—二氨基—5—取代苄基嘧啶类质谱研究

报道了8个2,4-二氨基-5-取代苄基嘧啶衍生物的电子轰击质谱及碰撞活化解离和质量分析离子动能谱.该谱提供了化合物醚键及2,4-二氨基-5-取代苄基嘧啶环的主要碎裂途径,总结了一些裂解规律,将有助于这类化合物的结构推断。     

β-环糊精与N,N''''-二(4-吡啶基甲基)-1,6-己二胺自组装包结行为的研究

以4-吡啶甲醛和1,6-己二胺为原料,合成了含吡啶基的还原双席夫碱客体N,N'-二(4-吡啶基甲基)-1,6-己二胺(C6N4),通过核磁共振技术研究了β-环糊精与C6N4的自组装包结作用,测定了包结比和稳定常数.结果表明,β-环糊精与客体C6N4在水溶液中形成1∶1的包结配合物,其稳定常数的平均值为1.7×102dm3·mol-1.     

FTIR-ATR技术研究聚氨酯类文物保护材料的光降解

Polyurethanes are one kind of relic protection materials commonly used. During artificial photo-ageing, three polyurethanes, HDI-based polyurethane, MDI-based polyurethane and TDI-based polyurethane, have been considered to undergo UV radiation. Photochemical degradation of the polyurethanes has been monitored by means of Fourier transform infrared spectroscopy with attenuated total reflection accessory （FTIR-ATR）. It was proved that the mechanism of the photochemical degradation of polyurethanes might be the scissions of carbamate （urethane） groups and the re-reactions of radical groups formed in the scission reactions. From the experiment results HDI-based polyurethane, an aliphatic diisocyanate, could be considered to be more suitably used as relic protection materials among these three polyurethanes for its ageing products with less color.     

Systematic investigation of the hydrothermal syntheses of Pr(III)-PDA (PDA = pyridine-2,6-dicarboxylate anion) metal-organic frameworks

A series of novel two-dimensional (2D) and three-dimensional (3D) praseodymium coordination polymers, namely, {[Pr3(PDA)4(HPDA)(H2O)8] x 8H2O}n (2), {[Pr2(PDA)3(H2O)3] x H2O}n (3), {[Pr(PDA)(H2O)4] x ClO4}n (4), and { [Pr2(PDA)2(H2O)5SO4] x 2H2O}n (5) (PDA = pyridine-2,6-dicarboxylic anion), was designed and synthesized under hydrothermal conditions. Complexes 1-3 (chainlike polymer, {[Pr(PDA)(HPDA)(H2O)2] x 4H2O}n (1) was also obtained independently by us, although it has been reported recently by Ghosh et al.) were fabricated successfully by simply tuning the Pr/PDA ratio and exhibited various and intriguing topological structures from a 1D chain to a 3D network. While the synthetic strategy of 5 was triggered and further performed only after 1 was structurally characterized. The complexes were characterized by X-ray single-crystal determination, spectroscopic, and variable-temperature magnetic susceptibility analyses. In complex 2 an unusual nanosized square motif as a building block constructed by eight Pr ions was further assembled into a highly ordered 2D grid compound. In complex 3 the decanuclear Pr metal-based structure as a repeat unit interpenetrated to form a novel 3D polymer. Complex 4 was a 3D network polymer fabricated through a hexanuclear Pr ring as a building block, and ClO4- anions as guests were trapped in the cavity. In complex 5 six Pr atoms, two SO4(2-) anions, and carboxylic oxygen bridges constructed an intriguing rectangle structure as a repeat unit in the grid to form a 2D coordination polymer in which the unique bi-bidentate coordination mode of SO4(2-) anion was observed.