Hopf Bifurcation Control of a Hyperchaotic Circuit System

This paper is concerned with the Hopf bifurcation control of a new hyperchaotic circuit system. The stability of the hyperchaotie circuit system depends on a selected control parameter is studied, and the critical value of the system parameter at which Hopf bifurcation occurs is investigated. Theoretical analysis give the stability of the Hopf bifurcation. In particular, washout filter aided feedback controllers are designed for delaying the bifurcation point and ensuring the stability of the bifurcated limit cycles. An important feature of the control laws is that they do not result in any change in the set of equilibria. Computer simulation results are presented to confirm the analytical predictions.     

基于异构双核的磁共振接收机的设计

提出了基于异构双核的低场核磁共振（Low-field Nuclear Magnetic Resonance,low-field NMR）接收机的设计,具有ARM（Adanced RISC Machines）和现场可编程门阵列（Field Programmable Gate Array,FPGA）先进的异构双核结构、高速的模数转换器（Analog to Digital Converter,ADC）采集、增益的可控以及可视化显示等特性,提高了整个系统的性能指标.设计中采用Xilinx公司的系统开发工具System Generator来实现内部信号处理功能.实验结果表明,数字接收机具有结构紧凑、可重构性强、采样速率高和成本低等特点,并且增益的可控使接收机获得了较大的动态范围,提高了重建图像的信噪比（Signal-to-Noise Ratio,SNR）.     

激光激发水中产生超声波的实验研究

采用压电陶瓷水听器研究了Nd：YAG脉冲激光激发水中产生瞬态超声波的特性,给出了声压信号随距离的变化关系。研究结果表明：用激光产生水下声波是完全可行的。当观测点与光击穿区的距离r远大于柱体长度时,垂直于光传播方向的激光瞬态超声波幅值与r成反比;当观测点与光击穿区的距离r很小时,垂直于光传播方向的声压幅值与产成反比。此外,当激光入射角度发生变化,超声脉冲的幅值也随之发生变化,其幅值在激光束垂直入射的时候最大。     

电子元件的老化与筛选

为了保证电子元件使用的可靠性和稳定性,需要进行老化与筛选.电子元件的失效分为早期失效、正常使用期和损耗老化失效期三个阶段.除了常用的老化筛选方法之外,还可采用自然老化和简易老化方式.以场效应管功率老化系统为例研究了常用试验装置.国产电子元件需加强老化筛选这个环节.     

MgO(001) barrier based magnetic tunnel junctions and their device applications

Spintronics has received a great attention and significant interest within the past decades,and provided considerable and remarked applications in industry and electronic information etc.In spintronics,the MgO based magnetic tunnel junction(MTJ) is an important research advancement because of its physical properties and excellent performance,such as the high TMR ratio in MgO based MTJs.We present an overview of more than a decade development in MgO based MTJs.The review contains three main sections.(1) Research of several types of MgO based MTJs,including single-crystal MgO barrier based-MTJs,double barrier MTJs,MgO based MTJs with interlayer,novel electrode material MTJs based on MgO,novel barrier based MTJs,novel barrier MTJs based on MgO,and perpendicular MTJs.(2) Some typical physical effects in MgO based MTJs,which include six observed physical effects in MgO based MTJs,namely spin transfer torque(STT) effect,Coulomb blockade magnetoresistance(CBMR) effect,oscillatory magnetoresistance,quantum-well resonance tunneling effect,electric field assisted magnetization switching effect,and spincaloric effect.(3) In the last section,a brief introduction of some important device applications of MgO based MTJs,such as GMR & TMR read heads and magneto-sensitive sensors,both field and current switching MRAM,spin nano oscillators,and spin logic devices,have been provided.     

翻转课堂教学模式下知识迁移能力的培养*——以“复杂氧化还原电对电极电势的计算”为例

“复杂氧化还原电对电极电势的计算”一直是大学化学教学的难点,以此为例开展翻转课堂教学:教师引导学生归纳、类比,厘清难溶盐电极、配合物电极与“金属电极”之间的渊源,完成知识的内化;通过课堂翻转,学生将内化的知识在课堂实践中加以展现与深化,掌握复杂电极在标准状态下电极电势的计算方式。实践表明,该教学模式避免了学生线上学习存在的刷屏、刷题、心理浮躁等现象,有助于推动学生进行深度学习,将碎片化的知识迁移、串联、整合成体系,达到学以致用的目的。     

BaB2O4低温相单晶体的生长及其相关体系相图的研究

本文用差热分析和X射线衍射等方法研究了BaO-Na₂O-B₂O₃三元系的两个截面:BaB₂O₄-Na₂B₂O₄和BaB₂O₄-Na₂O赝二元系的相平衡关系。BaB₂O₄-Na₂B₂O₄属共晶体系,其共晶温度为826±3℃。在BaB₂O₄-Na₂O体系中发现一个新化合物BaB₂O₄·Na₂O,该化合物在846±3℃同成分熔化。BaB₂O₄·Na₂O对BaB₂O₄和Na₂O均为共晶体系,其共晶温度分别为755±3℃和573±3℃。并根据所得的结果,分别以15mol％Na₂O和13mol％Na₂B₂O₄为助熔剂,用提拉法培养出2×4×6mm³和2×4×8mm³的低温相BaB₂O₄单晶体。 关键词：     

ICP光源的激光烧蚀固体样品引入方法进展

根据近几年来国内外的有关文献,叙述了ICP光源的激光烧蚀固体进样方法的研究进展及其在物质成分分析中的应用。着重阐述了激光输出特性(输出波长、脉冲宽度、重复频率、能量密度)和环境气氛(氦气、氩气)对样品烧蚀过程的影响,讨论了激光烧蚀室、气溶胶传输管道及样品引入改进装置在蒸发物质被传输到ICP光源过程中的作用。获得较小而均匀的气溶胶颗粒和稳定高效地将烧蚀物质输送到ICP是完善激光烧蚀固体进样技术的关键环节,元素分馏效应及蒸发物沉积是影响分析性能的重要因素。作为实际例子,也讨论了激光烧蚀固体进样电感耦合等离子体发射光谱法/质谱法在金属、玻璃、有机物及其他样品分析方面的应用,对分析方法的准确度、精密度、检出限和灵敏度进行了简要论述。     

红外耦合光学系统设计

红外目标模拟器由红外目标图像发生器和投影光学系统组成。该红外光学系统是一个要求与2个导引光学系统的光学技术参数相匹配的长焦距、大视场和具有像方远心光路的中红外光学系统。叙述用于红外目标模拟器的红外耦合光学系统的设计原理，提出它与导引光学系统一起可组成放大倍率M=4.5×的红外投影光学系统，并指出IR CRT产生的图像通过红外投影光学系统可成像在导引接收器上。针对给出的红外耦合光学系统的设计特点和技术要求，光学材料选取硅（Si） 锗（Ge） 硅（Si），采用简单的柯克三片式结构完成光学系统设计。设计评价结果表明，该系统的光学性能和成像质量均满足设计指标要求。