A new anode material LiMoS2 for use in rechargeable Lithium Ion Batteries

The novel applications of molybdenum disulfide in recent research were reviewed, such as in lubricant, catalyst and photoelectrochemical solar cells. Recently, we found that LiMoS2 is a good candidate for new anode materials for lithium ion batteries with high lithium storage capacity.Here, the anode material LiMoS2 was synthesized by a hydrothermal method at 150℃ and the electrochemical characterization as an anode material for lithium ion batteries was examined.put in Teflon-lined stainless steel autoclaves of capacity 40 mL. Distilled water was used to fill the autoclaves to 70 % of the total volume. The autoclaves were maintained at 150℃ for 24 h and then cooled naturally. The resulting dark-gray powders were filled and washed with distilled water,diluted hydrochloric acid and ethanol, successively. The final products were dried at 80℃ for 24 h.The powder X-ray diffraction pattern showed the prepared LiMoS2 was amorphous structure. A test cell using LiMoS2 as the active material was discharged and charged between 3 and 0.01 V with respect to Li metal at a constant current density of C/5 (that is, one lithium per formula unit in 5 hours). During the first discharge, the potential rapidly drops to reach a large plateau at 2.2 V, then slowly drops to the other plateau at 0.8 V, and then continuously decreases down to 0.01V. There is only a plateau at 1.35 V in the subsequent discharge curves. The plateaus of charge potential appear at about 1.9 V.The irreversible loss was 41% in the first cycle. The ratio of discharge and charge is more than 99%in the subsequent cycles. Moreover, the ratio of discharge and charge almost reaches 100% after thedemonstrated that LiMoS2 has a very high capacity and a good cycle-ability as an anode material forlithium ion batteries.     

人参中总皂甙的超声波快速提取方法研究

建立了人参中总皂甙超声波半微量快速提取方法，与索氏提取法相比，此法提取时间由索氏法的1－2个工作日缩短到30min，节省大量试剂，综合提取效率提高数十倍，与索氏提取法对照分析表明，此法可完全满足人参中总皂甙的快速测定要求。     

大孔树脂对红霉素的吸附动力学研究

利用大孔吸附树脂Amberlite XAD16及HZ816对红霉素的吸附动力学实验,研究了温度、初始浓度、溶液pH值及搅拌速度等因素对吸附过程的影响.结果表明,Amberlite XAD16及HZ816对红霉素的吸附速率符合一级吸附动力学方程及颗粒内扩散方程,过程受液膜扩散阻力及颗粒内扩散阻力共同影响.同时,表观吸附速率常数与颗粒内扩散速率常数均随着温度的升高而增大,随着初始浓度的增大而增大,随着溶液pH值增大而增大,随着搅拌速度加快而增大.     

C_(59)F_(2n)HN(n=1,2)异构体的结构与稳定性的理论研究

分别用MNDO和AM1两种半经验方法,对C59F2nHN (n = 1, 2) 的异构体进行几何构型全优化,结合频率分析及HF/6-31G单点能计算,确定了各异构体的基态结构及其相对稳定性。计算结果表明,C59HN的F加成物的立体选择性规律与C60的不同,最稳定异构体不是1-2加成物。C59F2HN的最稳定异构体是1-4加成的6, 18-或12, 15-异构体; C59F4HN的最稳定异构体是1-4,1-4加成的6, 18; 12, 15-异构体,其能量远小于其它各异构体的能量。N原子取代碳笼骨架C原子后,改变了碳笼F加成物的立体选择性规律。     

氯代膦烯化合物与零价钯的氧化加成反应机理探讨

与氯代烯烃或芳烃相反, 氯代膦烯与零价钯的氧化加成反应可以在温和条件下进行. 提出了可能的反应机理. 起始卤代膦烯的结构决定了反应历程和最终产物的结构.     

含松香骨架的新型手性季铵盐相转移催化剂的合成及其在不对称环氧化反应中的应用

以天然松香为原料合成了4个新型手性季铵盐类相转移催化剂, 并用于催化不对称查尔酮环氧化反应, 发现这类手性相转移催化剂可以有效地催化查尔酮的不对称环氧化, 环氧化产物ee最高达20%.     

Sufficient Conditions for Amalgamated 3-Manifolds to be ∂-Irreducible∗

In this paper, the authors give some sufficient conditions for an amalgamated 3-manifold along a compact connected surface F with boundary to be ?-irreducible in terms of distances between some kinds of vertex subsets of the curve complex and the arc complex of F.     

ON A SUFFICIENT CONDITION FOR THE METRIC COEFFICIENTS TO BE CONFORMALLY TIME-INDEPENDENT

The statement in Rindler's book "Essential Relativity" [(Springer-Verlag, New York, 1977), p. 119] claiming that "the metric coefficients are time-independent if light signals tracing out the same path always take the same coordinate time" has two problems, the first one has been pointed out by us in a recent paper "relation between choosing ‘good' coordinates and the behavior of light signals" [Acta Physica Sinica (Overseas Edition), 3(1994), 881], while the second is the main focus of the present article.     

Yb(C~6Me~6) (AlCl~4)~3·MeC~6H~5 的合成及其晶体结构

合成了一种新的芳烃络合物Yb(C~6Me~6)(AlCl~4)~3·MeC~6H~5 , 并确定了其晶体结构.     

合成重要中间体1,4位官能化化合物的简便方法

5,6-取代环烯醚2在乙腈的单重态氧反应有效的生成一系列1,4位官能化化合物3。1,4位官能化化合物为合成上重要的中间体。环烯醚2可以通过β-二酰基化合物1和1,3-二溴丙烷在稀碱(碳酸钾/丙酮)条件下缩合生成。