Enhancing molecular formation in a Rb-MOT

In this paper, we report observation of an enhancement of the ground state molecule Rb₂ formation in a Rb magneto-optical trap due to a photoassociation laser. Such an enhancement effect is due to flux enhancement of atomic pairs at short internuclear distances. Our experimental observations consist in the measurement of the molecular formation rate constant due to a probe laser as a function of the trap laser intensity. The results are compared with a simple semi-classical model, showing good agreement. We conclude that the production of cold Rb₂ may be enhanced using appropriate laser parameters; this may be useful for future experiments involving production and trapping of ultracold ground state molecules.     

Velocity Quantization Approach of the One-Dimensional Dissipative Harmonic Oscillator

Given a constant of motion for the one-dimensional harmonic oscillator with linear dissipation in the velocity, the problem to get the Hamiltonian for this system is pointed out, and the quantization up to second order in the perturbation approach is used to determine the modification on the eigenvalues when dissipation is taken into consideration. This quantization is realized using the constant of motion instead of the Hamiltonian. PACS: 03.20.+i, 03.30.+p, 03.65.−w,03.65.Ca     

Measurement of surface topography by RGB Shadow-Moiré with direct phase demodulation

In this paper we present the application of a direct demodulation method for the measurement of surface topography by means of Shadow-Moiré. In our set-up, we use three LEDs (with green, red and blue peak wavelengths) to illuminate the grating. Due to the different position of these light sources, a polychromatic Shadow-Moiré fringe pattern is produced, which can be described as the superposition of three monochromatic (red, green and blue) fringe patterns. Taking the image of this polychromatic fringe pattern with a RGB CCD camera, we get a monochromatic fringe pattern stored at each RGB channel of the CCD. The direct demodulation algorithm employed uses these fringe patterns to calculate the wrapped phase map. After unwrapping the phase map using a standard multi-grid technique, we implemented an automatic procedure to detect the area of interest of the phase map by removing low modulation zones and to calculate the absolute value of the phase. In this way it is possible to determine the topography of a surface with a single RGB snapshot maintaining a simple experimental set-up, which is an important feature, especially for the study of dynamic phenomena such as deformations. We present the experimental results obtained after measuring different objects with both smooth and rough surface textures.     

On the model of divacancies in germanium

A model of a divacancy which explains a number of experimental facts for Ge exposed to a flow of accelerated electrons at temperature T=77 K is proposed. The model explains the absence of photoconduction associated with photoexcitation of infrared absorption bands at 0.44 and 0.52 eV corresponding to divacancies; the difference in the values of activation energy for divacancy energy levels determined by optical and electrical methods; and the existence of the limiting position of the Fermi level in the forbidden gap in the case of irradiation with large radiation fluxes.     

The effect of microscopic features upon the transmissivity of enclosed laser ablated laminated metallised polymer films

A vacuum-deposited aluminium layer (20 nm) is sandwiched between two layers of laminated oriented polypropylene (OPP) film whose thickness varies from 20 to 40 μm. Selected areas of this sealed system were transparentised by the redistribution of the aluminium layer without breaking the seal or causing damage to the OPP film using a 75 W Q-switched Nd:YAG laser. The resultant transparentised films contain aluminium particles, distorted polymer areas and intact areas of the vacuum-coated aluminium layer. This paper investigates the effect of microscopic features upon the overall transmissivity of the laser-treated films and hence the quality of the transparentisation process.     

Polarization experiments with the SPIN setup at the ITEP synchrotron

New experimental data on the spin-rotation parameters A and R measured for elastic π ^± p scattering in the resonance region and on the asymmetry in pC scattering at primary momenta in the range 1.35–2.02 GeV/c, as well as in quasielastic proton scattering on nuclei in the same momentum range, are summarized. All these data were recently obtained by using the proton synchrotron installed at the Institute of Theoretical and Experimental Physics (ITEP, Moscow). The spectrum and features of seven isospin-3/2 baryon resonances that form a peak in the total cross section at a c.m. energy of 1.9 GeV are analyzed on the basis of new data on the parameters A and R, and the results of this analysis are presented. The experiments surveyed in this article were performed by a collaboration of researchers from ITEP and the Petersburg Nuclear Physics Institute (PNPI, Gatchina), the ITEP-PNPI collaboration.     

The role of the spontaneous electrooptical effect in the formation of electroholographic properties of strontium barium niobate crystals

The possibility of usage of the spontaneous electrooptical (EO) effect in strontium barium niobate (SBN) crystals for the creation of controlled electroholographic elements is studied. It is found that unipolar EO properties of these crystals with respect to switching their spontaneous polarization make it possible to devise field-controlled holographic elements with reversible energy-independent memory for spatial position of an optical beam.     

Elastic and Thermophysical Properties of Poly(Vinyl Chloride) and Chlorinated Polyethylene Blends

The results of experimental and theoretical investigations of elastic and thermophysical properties of poly(vinyl chloride) (PVC) and chlorinated polyethylene (CPE) blends are presented. Eight types of specimens with different ratios of weight contents of PVC and CPE (PVC/CPE = 100/0, 90/10, 80/20, 60/40, 40/60, 20/80, 10/90, and 0/100) were tested. The effect of blend composition on the elastic constants (tensile and shear modulus) is discussed. The data on the thermal conductivity, thermal diffusivity, and heat capacity of the blends investigated are also presented.     

Reaction of 3-Alkoxy-7-methylenebicyclo[3.3.1]non-2-ene with N-Halosuccinimides

Russian Journal of General Chemistry -     

Account of Thermal Flow Through Metal-Semimetal BiSb Contact Boundary for Determination of EHF Detector Volt-Watt Sensitivity

Bismuth, antimony and its alloys are the typical representatives of a class of semimetals, which electric conductance is lower in 10²-10³ times, than of usual well conducting an electrical current metals. The alloys bismuth with antimony have semi-conductor properties in wide area of compositions at temperatures below 77 °K. The semimetals are rather perspective materials from the point of view of their probable application in various devices [1,2,3].In present time the semimetal alloys BiSb have wide application in thermoelectric generators and refrigerators. In work [3] the opportunity of use of semimetals BiSb with percentage content of Bi and Sb from 8 % up to 25 % was shown as high-sensitivity and of small inertion indicators of the mm range radiation where thermoelectric effect is used. The principle of action of such indicators is based on occurrence of temperature gradient in a semimetal crystal BiSb that has two contacts of the various area with flowing electrical current. Basic element of such device is the dot contact metal - semimetal. One of the main characteristics is volt-watt sensitivity of metal-semimetal BiSb contact which calculating is shown in present work.