Radiocatalytic H2 production with gamma-irradiation and TiO2 catalysts

The radioactive concentrations of radionuclides were measured in the soil and groundwater below the 12 GeV proton beam-line tunnel at KEK. Various long-lived radionuclides, (⁷Be, ²²Na, ⁴⁶Sc, ⁵⁴Mn, ⁶⁰Co, ¹³⁴Cs, ¹⁵²Eu and ¹⁵⁴Eu) were observed in the soil samples by -ray spectra measurements, and ³H was also detected by liquid scintillation counting. On the other hand, ³H, ²²Na and ⁵⁴Mn, which were leached from the soil were measured in the groundwater below the EP2 beam line. ³H and ²²Na were also found in slight amounts in groundwater collected in a well dug beside the East Counter Hall. From a comparison with the radioactive concentration in soil and groundwater, the order of the leaching percentages were ³H>²²Na>⁵⁴Mn. This tendency was in agreement with an experimental result of the RI laboratory.     

Photoactivation of pheophorbide a induces a mitochondrial-mediated apoptosis in Jurkat leukaemia cells

The mechanism of cell death by pheophorbide a (Pba) which has been established to be a potential photosensitizer was examined in experimental photodynamic therapy (PDT) on Jurkat cells, a human lymphoid tumor cell line. In 30-60 min after irradiation, Pba treated cells exhibited apoptotic features including membrane blebbing and DNA fragmentation. Pba/PDT caused a rapid release of cytochrome c from mitochondria into the cytosol. Sequentially, activation of caspase-3 and the cleavage of poly ADP-ribose polymerase (PARP) were followed. Meanwhile, no evidence of activation of caspase-8 was indicated in the cells. In experiments with caspase inhibitors, it was found that caspase-3 alone was sufficient initiator for the Pba-induced apoptosis of the cells. Pba specific emission spectra were confirmed in the mitochondrial fraction and the light irradiation caused a rapid change in its membrane potential. Thus, mitochondria were entailed as the crucial targets for Pba as well as a responsible component for the cytochrome c release to initiate apoptotic pathways. Taken together, it was concluded that the mode of Jurkat cell death by Pba/PDT is an apoptosis, which is initiated by mitochondrial cytochrome c release and caspase-3-pathways.     

A polymeric photobase generator containing oxime–urethane groups: Crosslinking reaction and application to negative photoresist

A polymeric photobase generator containing oxime–urethane groups was prepared by copolymerization of methyl methacrylate and methacryloxyethyl benzophenoneoxime urethane, and its photo and thermal crosslinking reaction after irradiation was examined from the measurement of UV and IR absorption spectral changes, insoluble fraction, and molecular weight changes. The photo‐crosslinking reaction of the copolymer film was more efficient when irradiations were carried out with 310 nm UV light in the presence of benzophenone than with 254 nm UV light without the addition of benzophenone. The crosslinking reaction increased after postexposure baking (PEB), and this thermal crosslinking reaction mechanism was studied from the identification of the photolysis products of a model compound, benzophenoneoxime phenylurethane, by a high‐performance liquid chromatography. The results indicate that the thermal crosslinking reaction of the copolymer after PEB is due to the formation of urea‐type chemical bonds. Resist properties of the copolymer were examined from the measurement of normalized thickness and micropattern development. A negative tone image with a resolution of 2 μm was obtained with this copolymer, having a sensitivity (D) of 1200 mJ/cm² and contrast (γ_n) of 1.31, when irradiation was carried out with 310 nm UV light in the presence of benzophenone following chloroform development. © 2004 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 42: 975–984, 2004     

Metallic macrocycle with a 1,3-alternate calix[4]arene phosphorus ligand

The preparation of an 1,3-alternate calix[4]arene phosphorus ligand, 25,27-bis(2-(diphenylphosphino)ethoxy)-26,28-bis(1-propyloxy)calix[4]arene (3), is presented. Ligand 3 is obtained in three steps in 64% overall yield. Reaction of 3 with [Rh(cot)2]BF4 produced the encapsulated rhodium complex [Rh[(P,P)-diphen-calix[4]arene]]BF4 (4). As revealed by a single-crystal X-ray diffraction study, the rhodium center has a bent coordination environment with a P-Rh-P angle of 135.66(3) degrees. Palladation of 3 employing [Pd(MeCN)4](BF4)2 yielded the chelate palladium complex 7 in which the palladium center has a slightly bent configuration. Treatment of the ligand with Pd(cod)Cl2 and [Pd(eta3-C4H7)(THF)2]BF4 leads to the isolation of the monometallic complex. Full characterization includes X-ray structural studies of compounds 3, 4, and 6.     

Simultaneous determination of trace uranium(VI) and zinc(II) by adsorptive cathodic stripping voltammetry with aluminon ligand

Uranium(VI) complexed with aluminon (3-[bis(3-carboxy-4-hydroxy-phenyl)methylene]-6-oxo-1,4-cyclohexadiene-1-carboxylic acid triammonium salt) was determined by adsorptive cathodic stripping voltammetry (ACSV) using a hanging mercury drop electrode. Trace uranium(VI) and zinc(II) can be simultaneously determined in a single scan in the presence of aluminon and urea. Optimal conditions were found to be: accumulation time; 180–200 s, accumulation potential; 50 mV versus Ag/AgCl, scan rate; 40 mV s⁻¹, supporting electrolyte; 0.1 M sodium acetate buffer at pH 6.5–7.0, and concentration of aluminon; 1×10⁻⁶ M. The linear range of uranium(VI) and zinc(II) were observed over the concentration range 2–33 and 30–120 ng ml⁻¹, respectively. The detection limit (S/N=3) are 0.2 ng ml⁻¹ (uranium) and 30 ng ml⁻¹ (zinc). A good reproducibility shows RSDs of 2.5–4.0% (n=10). The procedure offers high selectivity, with the presence of urea masking some metal ions.     

Two-dimensional carboxylate bridged network of europium(III)-transition metal(II) glutarate compounds

Four new heterometallic glutarate coordination polymers, [Eu2M(H2O)4][O2C(CH2)3CO2]4.2H2O (M = Mn (1), Fe (2), Co (3) and Ni (4)) have been obtained under hydrothermal synthesis. The single-crystal X-ray diffraction analyses showed that they have two-dimensional frameworks based on the linear polyhedral chains consisting of two nine-coordinated Eu(III)O9 and a six-coordinated M(II)O6. These 1-D MO6-Eu2O16 chains are cross-linked by glutarate ligands as an interchain pillared architecture, whose conformations vary depending upon the transition metals. The magnetic behavior of the compounds show a weak antiferromagnetic interaction, in which shielding of the 4f electrons by the outer shell electrons effectively precludes significant coupling interactions between the Eu-4f electrons and transition metal (M)-3d electrons.     

Cysteine carboxyl O-methylation of human placental 23 kDa protein

C-Terminal carboxyl methylation of a human placental 23 kDa protein catalyzed by membrane-associated methyltransferase has been investigated. The 23 kDa protein substrate methylated was partially purified by DEAE-Sephacel, hydroxyapatite and Sephadex G-100 gel filtration chromatographies. The substrate protein was eluted on Sephadex G-100 gel filtration chromatography as a protein of about 29 kDa. In the absence of Mg2+, the methylation was stimulated by guanine nucleotides (GTP, GDP and GTPgammaS), but in the presence of Mg2+, only GTPgammaS stimulated the methylation which was similar to the effect on the G25K/rhoGDI complex. AFC, an inhibitor of C-terminal carboxyl methylation, inhibited the methylation of human placental 23 kDa protein. These results suggests that the substrate is a small G protein different from the G25K and is methylated on C-terminal isoprenylated cysteine residue. This was also confirmed by vapor phase analysis. The methylated substrate protein was redistributed to membrane after in vitro methylation, suggesting that the methylation of this protein is important for the redistribution of the 23 kDa small G protein for its putative role in intracellular signaling.     

Studies of Japanese lacquer: Urushiol dimerization by the coupling reaction between urushiol quinone and a triolefinic component of urushiol

Previously, the formation of urushiol quinone from urushiol was demonstrated in the laccase-catalyzed oxidation process of the sap of the Japanese lacquer tree (Rhus vernicifera D.C.) or of lacquer formed from it. This paper presents the results of the investigation on the participation of urushiol quinone in the oxidative polymerization and crosslinking of the sap or the lacquer. The polymeric urushiol was obtained by the fractionation of the mildly oxidized sap (Japanese lacquer), and a specific dimeric urushiol was isolated from it by thin-layer chromatography (TLC). Structural analysis of the dimer illustrated that it has a conjugated triene structure and may be formed by a coupling reaction between urushiol quinone and a triolefinic component of urushiol. Further support for this was given by the spectroscopic study of the reaction between 4-tert-butyl-o-quinone and the triolefinic component of dimethylurushiol, and by the isolation and identification of the coupling product between them.     

Identification of new urinary metabolites of trimeprazine in rats by gas chromatography-mass spectrometry.

The metabolites of trimeprazine were identified in urine of rats by gas chromatography-mass spectrometry. After the oral administration of trimeprazine, the urinary metabolites were extracted with diethyl ether before or after hydrolysis with beta-glucuronidase. The identified metabolites were N-demethyltrimeprazine,3-hydroxytrimeprazine,N-demethyl-3-++ +hydroxytrimeprazine and trimeprazine sulphoxide.     

Microwave-assisted solid-phase synthesis of pseudopeptides containing reduced amide bond

Procedures were developed for reducing the reaction time and improving the yield of reductive alkylation in solid phase pseudopeptide synthesis by utilizing microwave irradiation. We chose dipeptides containing the reduced amide bond ψ[CH₂NH] as a model system and optimized the microwave assisted reductive alkylation reaction in solid phase pseudopeptide synthesis using Fmoc chemistry. Under the optimized condition, the reductive alkylation reaction used for incorporating the reduced amide bond into the dipeptides was completed in only 8.5 min, whereas the normal reductive alkylation reaction required a total of 300 min. The purity and yield of the various dipeptides containing the reduced amide bond synthesized in this way are better than those achieved using the reductive alkylation method without microwave irradiation. We chose α helical peptides, which are known as a difficult sequence to synthesize, and incorporated the reduced amide bond by the microwave-assisted reductive alkylation reaction. We successfully synthesized pseudopeptides containing the reduced amide bond as a major product by using the novel microwave-assisted method, whereas the same products were obtained as a minor product when using the reductive alkylation method without microwave irradiation.