Synthesis and property of diazocine derivatives substituted with imidazole in various positions

ABSTRACT

TIACA-I, TIACA-II were synthesized by changing the substitution position of the imidazole group in the diazocine core. TIACA-I, TIACA-II in the film state showed absorption in the range of 354 to 392 nm and exhibited blue photoluminescence (PL) emissions at 448 and 462 nm, respectively. The PL wavelength of TIACA-II is red-shifted by 14 nm than that of TIACA-I due to the electron-donating intensity depending on the position of the imidazole group. The use of TIACA-II in a non-doped OLED device resulted in blue emission with current efficiency of 2.84 cd/A and CIE of (0.15, 0.18).     

Characteristics of Ti0.97Co0.03O2:Sb0.01 dilute magnetic semiconducting thin films deposited at 500 °C by pulsed laser deposition

Epitaxial Ti_0.97Co_0.03O₂:Sb_0.01(TCO:Sb) films were deposited on R-Al₂O₃ (1 1 0 2) substrates at 500 °C in various deposition pressures by pulsed laser deposition. The solubility of cobalt within the films increases with decreasing deposition pressure at a deposition temperature of 500 °C. The TCO:Sb films deposited at 5×10⁻⁶ Torr exhibit a p-type anomalous Hall effect having a hole concentration of 6.1×10²²/cm³ at 300 K. On the other hand, films deposited at 4×10⁻⁴ Torr exhibits an n-type anomalous Hall effect having an electron concentration of about 1.1×10²¹/cm³. p- or n-type DMS characteristics depends on the change of the structure of TCO:Sb films and the solubility of Co is possible by controlling the deposition pressure.     

Evaluation of the dosimetric characteristics of a radiophotoluminescent glass dosimeter for high-energy photon and electron beams in the field of radiotherapy

We aimed to evaluate the suitability of a glass dosimeter (GD) for high-energy photon and electron beams in experimental and clinical use, especially for radiation therapy. We examined the expanded dosimetric characteristics of GDs including dose linearity up to 500 Gy, uniformity among GD lots and for individual GDs, the angular dependence, and energy dependence of 4 therapeutic x-ray qualities. In addition, we measured the dosimetric features (dose linearity, uniformity, angular dependence, and energy dependence) of the GD for electron beams of 10 different electron energy qualities. All measurements with the exception of dose linearity for photon beam were performed in a water phantom. For high-energy photon beams, dose linearity has a linear relationship for a dose ranging from 1 to 500 Gy with the coefficient of determination; R² of 0.998. The uniformity of each GD of dose measurements was within ±0.5% for four GD lots and within ±1.2% for 80 GDs. In terms of the effects of photon beam angle, lower absorbed doses of within 1.0% were observed between 60° and 105° than at 90°. The GD energy dependence of 4 photon beam energy qualities was within ±2.0%. On the other hand, the result of the dose linearity for high-energy electron beams showed well fitted regression line with the coefficient of determination; R² of 0.999 between 6 and 20 MeV. The uniformity of GDs exposed to the nominal electron energies 6, 9, 12, 16, and 20 MeV was ±1.2%. In terms of the angular dependence to electron beams, absorbed doses were within 2.0% between 60° and 105° than at 90°. In evaluation of the energy dependence of the GD at nominal electron energies between 5 and 20 MeV, we obtained responses between 1.1% and 3.5% lower than that for a cobalt-60 beam. Our results show that GDs can be used as a detector for determining doses when a high-energy photon beam is used, and that it also has considerable potential for dose measurement of high-energy electron beam.     

Preparation of functional spherical polysilsesquioxane/gold nanoparticle composites and their applications in DNA assay

Functional spherical solid and hollow particles of polysilsesquioxanes (PSQs) containing amine, thiol, and vinyl groups were prepared by polymerizing organotrialkoxysilanes (OTASs) containing corresponding chemical groups. Fluorescent PSQ particles were prepared by physically entrapping Rhodamine 6G, Coumarin 7, and Fluoresceine sodium salts. The intensity of fluorescent light increased initially with increasing amount of entrapped fluorophores and then leveled off or decreased slightly after reaching a maximum value. PSQ particles containing gold nanoparticles (GNPs), both inside and on the surface, were prepared by the in situ reduction of gold ions by the PSQ particles. When the reduction reaction was carried out for extended periods of time, the GNP that had formed inside the poly(3-mercaptopropyl)silsesquioxane (PMPSQ) and polyvinylsilsesequioxane (PVSQ) particles underwent interesting morphological changes. PSQ particles containing amine and thiol groups fixed the GNPs on the surface, which could be utilized further in binding amine-modified oligo-DNA strands. The aggregation of PSQ/GNP particles combined with complementary oligo-DNA strands was examined to demonstrate that these particles could be applied to DNA assays and isolation. The particles were characterized by scanning electron microscopy, transmission electron microscopy, solid state nuclear magnetic resonance spectroscopy, ultraviolet/visible spectroscopy, and fluorescence microscopy.     

Spherical shape BaO-ZnO-B<Subscript>2</Subscript>O<Subscript>3</Subscript>-SiO<Subscript>2</Subscript> glass powders prepared by spray pyrolysis

Fine-sized BaO-ZnO-B₂O₃-SiO₂ (BZBS) glass powders were directly prepared by high temperature spray pyrolysis. The hollow glass powders prepared at low preparation temperature of 1000 °C had a low density of 2.65 g/cm³. However, the densities of the BZBS powders obtained at preparation temperatures of 1200 and 1400 °C were each 3.92 and 4.13 g/cm³. The mean size of the BZBS glass powders prepared by spray pyrolysis at preparation temperature of 1400 °C was 0.98 μm. The glass transition temperature (T_g) of the prepared BZBS glass powders was 518.9 °C. The dielectric layers formed from the prepared BZBS glass powders with a dense structure had a clean surface and a dense inner structure without voids at the firing temperature of 580 °C. The transparencies of the dielectric layers formed from the prepared BZBS glass powders were higher than 90% within the visible range. PACS 42.70.Ce; 85.60.Pg; 71.55.Jv     

Perovskite-type (Ba<Subscript>0.15</Subscript>Sr<Subscript>0.85</Subscript>)(B<Subscript>0.15</Subscript>Co<Subscript>0.85</Subscript>)O<Subscript>3 − δ</Subscript> (B = Ti,Nb) oxides: structural stability,oxygen nonstoichiometry,and oxygen sorption/desorption properties

The perovskite-type Ba- and Ti/Nb-doped (Ba_0.15Sr_0.85)(B_0.15Co_0.85)O_3 ? δ (B = Ti, Nb) oxides were synthesized successfully by the solid-state reaction method. Crystal structure, elemental compositions, and oxygen nonstoichiometry of the as-synthesized (Ba_0.15Sr_0.85)(B_0.15Co_0.85)O_3 ? δ (B = Ti, Nb) oxides were investigated by X-ray diffraction (XRD), scanning electron microscopy-energy dispersive spectrometry (SEM-EDS), inductively coupled plasma (ICP)-atomic emission spectrometry, thermogravimetry (TG), and iodometric titration. XRD results demonstrate that the as-obtained (Ba_0.15Sr_0.85)(B_0.15Co_0.85)O_3 ? δ (B = Ti, Nb) oxides possess purely cubic perovskite-type structures. The temperature-swing oxygen sorption/desorption properties of the as-synthesized (Ba_0.15Sr_0.85)(B_0.15Co_0.85)O_3 ? δ (B = Ti, Nb) perovskite-type oxides were studied by the dynamic TG. Results show that the structural stability of the co-doped (Ba_0.15Sr_0.85)(B_0.15Co_0.85)O_3 ? δ (B = Ti, Nb) oxides is improved greatly, and the high oxygen sorption capacity for the perovskite-type (Ba_0.15Sr_0.85)(B_0.15Co_0.85)O_3 ? δ (B = Ti, Nb) oxides is also obtained between 300 and 950 °C in air.     

Prospective teachers anticipate challenges fostering the mathematical practice of making sense

Problem solving has long been a priority in mathematics education, and the first Common Core mathematical practice (SMP1) focuses on this priority through the language of “Make sense of problems and persevere in solving them.” We present findings from a survey about how prospective elementary teachers' (PTs) make sense of potential difficulties with fostering SMP1. Findings suggested that PTs' common anticipated difficulties relate to planning a solution pathway and self monitoring whether the solution makes sense. Moreover, a third of PTs disclosed that their anticipated difficulties are linked to their own personal struggles with aspects of SMP1. An alternative interpretation of SMP1 surfaced in which a small number of PTs described SMP1 as necessitating that a teacher teach multiple solution methods to students, instead of engaging students in productive struggle to develop their own strategies. We present a framework illustrating the connections between SMP 1 and Pólya's problem solving phases, and we discuss how these findings connect to and build on previous research of PTs' experiences with problem solving. We offer implications for the targeted support needed in teacher preparation programs to address these struggles, to prevent them from being replicated in their students.     

Correlation between Al2O3 particles and interface of Al-Al2O3 coatings by cold spray

Al-Al₂O₃ composite coatings with different Al₂O₃ particle shapes were prepared on Si and Al substrate by cold spray. The powder compositions of metal (Al) and ceramic (Al₂O₃) having different sizes and agglomerations were varied into ratios of 10:1 wt% and 1:1 wt%. Al₂O₃ particles were successfully incorporated into the soft metal matrix of Al. It was found that crater formation between the coatings and substrate, which is typical characteristic signature of cold spray could be affected by initial starting Al₂O₃ particles. In addition, when the large hard particles of fused Al₂O₃ were employed, the deep and big craters were generated at the interface between coatings and hard substrates. In the case of pure soft metal coating such as Al on hard substrate, it is very hard to get proper adhesion due to lack of crater formation. Therefore, the composite coating would have certain advantages.     

Theoretical study on structure of boron nitride fullerenes

We propose the parameters of the Stillinger-Weber potential for hexagonal boron nitride (BN) structures. For the reliability of these parameters, the structural property of BN fullerenes is investigated. The stability of BN fullerenes increases with increasing the number of atoms, due to the reduction of the curvature effect of BN fullerenes. The structures of the relative stable fullerenes are B₁₆N₁₆, B₁₈N₁₈, B₂₂N₂₂, B₂₅N₂₅, and B₂₈N₂₈.     

Two-level hierarchically preconditioned conjugate gradient methods for solving linear elasticity finite element equations

In this paper we study and compare some preconditioned conjugate gradient methods for solving large-scale higher-order finite element schemes approximating two- and three-dimensional linear elasticity boundary value problems. The preconditioners discussed in this paper are derived from hierarchical splitting of the finite element space first proposed by O. Axelsson and I. Gustafsson. We especially focus our attention to the implicit construction of preconditioning operators by means of some fixpoint iteration process including multigrid techniques. Many numerical experiments confirm the efficiency of these preconditioners in comparison with classical direct methods most frequently used in practice up to now.