Performance improvement of electrochromic display devices employing micro-size precipitates of tungsten oxide

In this paper, we studied the effect of micro-size WO₃ precipitates on the electrochromic characteristics based on aging test. The electrochromic mechanism can be effectively investigated by a solid-state TaN/WO₃/ITO capacitor. The experimental results reveal that WO₃ electrochromic devices with optimized aging time of 4 days exhibit a higher optical contrast and longer retention time, which is mainly attributed to the formation of micro-size WO₃ precipitates during aging process. The performance improvement using micro-size WO₃ precipitates has the potential in future large-area window or energy efficient display applications.     

Precision continuous-wave cavity ringdown spectroscopy of CO<Subscript>2</Subscript> at 1064 nm

A high performance continuous-wave cavity ringdown spectrometer using a rapidly swept cavity has been applied to investigate weak absorption of CO₂ line near 1064 nm. In the experimental setup, offset locking of the Nd:YAG laser to other iodine-stabilized Nd:YAG laser provides a frequency accuracy better than 20 kHz. The ringdown time was obtained by fitting the experimental ringdown data to a theoretically obtained ringdown curve. The absorption coefficient and absolute center wavelength are determined with accuracy better than two orders of magnitude with respect to the previous observations. Our experimental setup yields high performance in a relatively simple, low cost, and compact system that is amenable to chemical analysis of trace gases in medicine, agriculture, industry, and the environment.     

Prominin‐1‐Specific Binding Peptide‐Modified Apoferritin Nanoparticle Carrying Irinotecan as a Novel Radiosensitizer for Colorectal Cancer Stem‐Like Cells

Resistance of cancer stem cells to radiotherapy remains a major obstacle to successful cancer management. Prominin‐1 (PROM1) is a cancer stem cell marker. Nanoparticle (NP) chemotherapeutics preferentially accumulate in tumors and are able to target cancer and cancer stem‐like cells through cancer cell‐specific ligands, making them uniquely suited as radiosensitizers for chemoradiation therapy. Using a biocompatible apoferritin NP, a PROM1‐targeted NP carrying irinotecan (PROM1‐NP) is engineered. The synergistic effect of the NP and irradiation is evaluated in PROM1‐overexpressing HCT‐116 colorectal cancer cell lines in vitro and in vivo. PROM1‐NP has a size of 17.2 ± 0.2 nm and surface charge of ?13.5 ± 0.2 mV. It demonstrates higher intracellular uptake than nontargeted NP or irinotecan alone. Treatment with PROM1‐NPs decreases HCT‐116 cell proliferation in a dose‐ and time‐dependent manner. In vitro radiosensitization reveals that PROM1‐NP is significantly more effective as a radiosensitizer than nontargeted NP or irinotecan. HCT‐116 tumor xenograft growth is markedly slower following treatment with PROM1‐NP plus irradiation, suggesting that PROM1‐NP is more effective as a radiosensitizer than irinotecan and nontargeted NP in vivo. This study provides the first preclinical evidence of the effectiveness of PROM1‐targeted NP formulation of irinotecan as a radiosensitizer.     

Optimization of microcrystalline silicon thin film solar cell isolation processing parameters using ultraviolet laser

This study used ultraviolet laser to perform the microcrystalline silicon thin film solar cell isolation scribing process, and applied the Taguchi method and an L₁₈ orthogonal array to plan the experiment. The isolation scribing materials included ZnO:Al, AZO transparent conductive film with a thickness of 200 nm, microcrystalline silicon thin film at 38% crystallinity and of thickness of 500 nm, and the aluminum back contact layer with a thickness of 300 nm. The main objective was to ensure the success of isolation scribing. After laser scribing isolation, using the minimum scribing line width, the flattest trough bottom, and the minimum processing edge surface bumps as the quality characteristics, this study performed main effect analysis and applied the ANOVA (analysis of variance) theory of the Taguchi method to identify the single quality optimal parameter. It then employed the hierarchical structure of the AHP (analytic hierarchy process) theory to establish the positive contrast matrix. After consistency verification, global weight calculation, and priority sequencing, the optimal multi-attribute parameters were obtained. Finally, the experimental results were verified by a Taguchi confirmation experiment and confidence interval calculation. The minimum scribing line width of AZO (200 nm) was 45.6 μm, the minimum scribing line width of the microcrystalline silicon (at 38% crystallinity) was 50.63 μm and the minimum line width of the aluminum thin film (300 nm) was 30.96 μm. The confirmation experiment results were within the 95% confidence interval, verifying that using ultraviolet laser in the isolation scribing process for microcrystalline silicon thin film solar cell has high reproducibility.     

Determination of 129I in cement-solidified radwastes using neutron activation

The purpose of this study is to develop a neutron activation method to determine trace amounts of ¹²⁹I in cement-solidified radwastes. The radwaste samples were alkaline fused using KOH and then ¹²⁹I and iodine carrier were chemically separated by solvent extraction before and after neutron irradiation. Both stable iodine (¹²⁷I) and ¹²⁹I can be activated by neutrons through ¹²⁷I (n, 2n) ¹²⁶I and ¹²⁹I (n, γ) ¹³⁰I reactions; their activated radionuclides were counted together with a high-purity germanium detector. The chemical recovery yields ranged from 30 to 60 %, and it was found that more than 99.9 % of interfering radionuclides can be removed using solvent extraction after neutron irradiation. The minimum detectable amounts can be lowered to less than 1 mBq g^?1, which is superior to low energy γ-ray spectrometry by a factor of >10², on average. The established technique can be applied to re-evaluation of ¹²⁹I content in radwastes that can be re-classified to lower classes, and the cost for designing a final disposal facility can be significantly reduced.     

Synthesis and mesomorphism of 4,4'-bis(omega-hydroxyalkoxy)-alpha-methylstilbenes

A homologous series of 4,4'-bis(omega-hydroxyalkoxy)-alpha-methylstilbenes, denoted HAMS-n, has been synthesized. Here n is the carbon atom length of the peripheral n-alkyl chain; in this work n = 2 to 8 and 11. The composition, microstructure, thermal properties, and mesomorphism of the homologues were determined using elemental analysis, ¹H NMR, FTIR, DSC, wide angle X-ray diffraction, and polarizing optical microscopy with a heating stage. The influence of the length and the even/odd numbers of methylene units of the peripheral chains on the variants of mesomorphism and the stability of mesophases, as well as on their transition temperatures, are discussed. The homologues with n = 8 and 11 were enantiotropic monomorphic, CrG (or CrH). The odd homologues showed monotropic trimorphism on cooling, while the even homologues exhibited enantiotropic trimorphism. A pronounced even/odd effect on the melting temperatures was observed.     

Seco-Abietanoids from Cryptomeria japonica and Their Inhibitory Activity Toward Xanthine Oxidase

Chemistry of Natural Compounds - A new seco-abietanoid, 12-methoxy-7-oxo-6,7-secoabieta-8,11,13-trien-6-oic acid (1), and a known seco-abietanoid,12-hydroxy-6,7-secoabieta-8,11,13-triene-6,7-dial...     

A New Seco-Abietanoid from the Bark of Cryptomeria japonica

Chemistry of Natural Compounds - A new seco-abietanoid, 12-hydroxy-6,7-seco-abieta-8,11,13-triene-6,7-dioic acid (1), was isolated from the methanol extract of the bark of Cryptomeria japonica. The...     

Insight into the thermal decomposition of kaolinite intercalated with potassium acetate: an evolved gas analysis

The thermal decomposition process of kaolinite–potassium acetate intercalation complex has been studied using simultaneous thermogravimetry coupled with Fourier-transform infrared spectroscopy and mass spectrometry (TG-FTIR-MS). The results showed that the thermal decomposition of the complex took place in four temperature ranges, namely 50–100, 260–320, 320–550, and 650–780 °C. The maximal mass losses rate for the thermal decomposition of the kaolinite–potassium acetate intercalation complex was observed at 81, 296, 378, 411, 486, and 733 °C, which was attributed to (a) loss of the adsorbed water, (b) thermal decomposition of surface-adsorbed potassium acetate (KAc), (c) the loss of the water coordinated to potassium acetate in the intercalated kaolinite, (d) the thermal decomposition of intercalated KAc in the interlayer of kaolinite and the removal of inner surface hydroxyls, (e) the loss of the inner hydroxyls, and (f) the thermal decomposition of carbonate derived from the decomposition of KAc. The thermal decomposition of intercalated potassium acetate started in the range 320–550 °C accompanied by the release of water, acetone, carbon dioxide, and acetic acid. The identification of pyrolysis fragment ions provided insight into the thermal decomposition mechanism. The results showed that the main decomposition fragment ions of the kaolinite–KAc intercalation complex were water, acetone, carbon dioxide, and acetic acid. TG-FTIR-MS was demonstrated to be a powerful tool for the investigation of kaolinite intercalation complexes. It delivers a detailed insight into the thermal decomposition processes of the kaolinite intercalation complexes characterized by mass loss and the evolved gases.     

The Function of Self-Assembled Polyfluorene-Based π-Conjugated Supramolecular Structures Formed in Twisted Nematic Liquid Crystals

We demonstrate that the supramolecular structure can be formed through the fibrous self-assembly of the polyfluorene-based polymer F8BT in liquid crystal (LC) 5CB. With the utility of alignment layer, the F8BT molecules can be aligned and formed oriented polymer network. We found that the presence of oriented polymer network makes twisted nematic LC exhibit excellent electro-optical properties (EO) of driving voltage reduction and EO bump peak elimination. The polyfluorene-based supramolecular structure provides the function of stabilizing LC molecules. We consider this functional self-assembled network has potential to apply in various devices for the ability of improving performance in operating property.