Study of three rotating radio transients with FAST

Rotating radio transients(RRATs) are peculiar astronomical objects whose emission mechanism remains under investigation.In this paper, we present observations of three RRATs, J1538+2345, J1854+0306 and J1913+1330, carried out with the Fivehundred-meter Aperture Spherical radio Telescope(FAST). Specifically, we analyze the mean pulse profiles and temporal flux density evolutions of the RRATs. Owing to the high sensitivity of FAST, the derived burst rates of the three RRATs are higher than those in previous reports. RRAT J1854+0306 exhibited a time-dynamic mean pulse profile, whereas RRAT J1913+1330 showed distinct radiation and nulling segments on its pulse intensity trains. The mean pulse profile variation with frequency is also studied for RRAT J1538+2345 and RRAT J1913+1330, and the profiles at different frequencies could be well fitted with a cone-core model and a conal-beam model, respectively.     

Synthesis,characterization, and electrochemical performance of nitrogen-modified Pt–Fe alloy nanoparticles supported on ordered mesoporous carbons

A method has been demonstrated to synthesize nitrogen-modified Pt–Fe alloyed nanoparticles (9.2–11.3 nm) supported on ordered mesoporous carbon (Pt _x Fe_100?x N/OMC), which is fabricated by a conventional wet chemical synthesis of Pt–Fe alloyed nanoparticles and followed by carbonization of the nanoparticles with tetraethylenepentamine as nitrogen chelating agent. Among these electrocatalysts, the Pt₃₀Fe₇₀N/OMC has highly catalytic activity for the oxygen reduction reaction (ORR) with significantly enhanced methanol tolerance as well. Combining the results from X-ray diffraction and X-ray absorption spectroscopy, it can be observed that Pt metal in the Pt₃₀Fe₇₀N/OMC is present in the outer shell of Pt–Fe alloys with face-centered cubic crystalline structure. By X-ray photoelectron spectroscopy, the nitrogen-modified Pt surface of Pt₃₀Fe₇₀N/OMC exhibits significant selectivity toward the ORR in the presence of methanol. This enhancement of methanol tolerance could be attributed to the inhibition of methanol adsorption resulting from the modification of the Pt surface with nitrogen.     

A possible origin of room temperature ferromagnetism in Indium-Tin oxide thin film: Surface spin polarization and ferromagnetism

Room temperature ferromagnetism in both transition-metals doped and undoped semiconductor thin films and nanostructures challenges our understanding of the magnetism in solids. In this report, we performed the magnetic measurement and Andreev reflection spectroscopy study on undoped Indium-Tin oxide (ITO) thin films and bulk samples. The magnetic measurement results of thin films show that the total magnetization/cm² is thickness independent. Prominent ferromagnetism signal was also discovered in bulk samples. Spin polarized electron transports were probed on ITO thin film/superconductor interface and bulk samples surface/superconductor interface. Based on the magnetic measurement results and spin polarization measurement data, we propose that the ferromagnetism in this material originates from the surface spin polarization and this surface polarization may also explain the room temperature ferromagnetism discovered in other undoped oxide semiconductor thin films and nanostructures.     

Free Molecular Flow with Boundary Effect

We study the dissipative effect of the boundary condition in the kinetic theory. We focus our study on the simplest situation of the free molecular flow with diffuse reflection boundary condition and constant boundary temperature, T _*. The geometry is also chosen to be the simplest ones, a bounded symmetric domain in ${\mathbb{R}^d}$ : an interval for d = 1, a disk for d = 2, and a ball for d = 3. It is shown that the solution converges to the global Maxwellian with the given boundary temperature T _*. We obtain the optimal convergence rates of (t + 1)^?d . The stochastic formulation of Shih-Hsien Yu is refined and generalized for our analysis.     

应力对La0.83Sr0.17MnO3薄膜输运性能的影响

采用溶胶-凝胶方法在Si(111)上制备了LSMO(x=0.17)薄膜.研究了块体材料和不同厚度薄膜R -T曲线、红外光谱和X射线衍射.结果表明，LSMO薄膜属于正交晶体结构，薄膜取向与膜厚度 有关，当膜厚度为450nm或680nm时，主要取向〈200〉，而膜厚度为900nm时取向为〈020〉 ：根据离子对相互作用能和谐振子模型，得到了红外吸收与Mn—O—Mn键长和键角关系式，6 00cm^-1附近红外吸收与晶格常数b的变化有关；块体与薄膜的金属—绝缘体转变 温度(T_MI)存在较大差别，薄膜转变温度显著低于块体，并与厚度有一定关系. 认为是LSMO薄膜中的应力诱导了晶格常数变化，引起键角改变及JT效应是转变温度变化的主 要原因. 关键词： 单晶硅 晶格常数 金属—绝缘体转变温度 应力诱导     

Dispersion Compensation in Externally Modulated Transmission System Using Chirped Fiber Grating

We present an externally modulated NTSC AM-VSB erbium-doped fiber amplifier (EDFA)-repeated system in the 1550 nm region which uses a chirped fiber grating (CFG) as a dispersion compensation device. In contrast to the conventional externally modulated fiber optical CATV systems, either with or without dispersion compensation fiber (DCF), good performances of carrier-to-noise ratio (CNR) ≥50 dB, composite second order (CSO) ≥74 dB, and composite triple beat (CTB) ≥65 dB were achieved for the full channel band after a 100-km single-mode fiber (SMF) transmission.     

Magneto-transport properties of La0.7Ca0.3MnO3/SrTiO3/La0.7Ce0.3MnO3 tunnel junction

Hole-doped rare-earth manganite La_0.7Ca_0.3MnO₃ and the electron-doped manganite La_0.7Ce_0.3MnO₃ both show a metal-insulator transition around 250 K associated with a ferromagnetic transition and colossal magnetoresistance. In an earlier publication we have reported the rectifying characteristic of La_0.7Ca_0.3MnO₃/SrTiO₃/La_0.7Ce_0.3MnO₃ tunnel junction at room temperature, showing that it is possible to fabricate a diode out of the polaronic insulator regime of doped manganites. Here we report the magneto-transport properties of such a tunnel junction above and below the metal-insulator transition. We show, from the large positive magnetoresistance of the tunnel junction at low temperature, that La_0.7Ce_0.3MnO₃ could be a minority spin carrier ferromagnet. The implication of this observation is discussed.     

化学气相沉积法中SnO2一维纳米结构的控制生长

以Sn和SnO为源材料,化学气相沉积法中通过控制反应物配比及载气中的氧含量等宏观实验条件,实现了SnO2一维纳米结构的控制生长,成功获得各种不同横向尺度的SnO2纳米线、纳米带以及直径连续变化的针状纳米结构. 通过扫描电子显微镜、X射线衍射仪对不同实验条件下所制备的样品进行形貌和晶格结构表征,认为高温生长点附近锡与氧的相对含量是控制SnO2一维纳米结构生长的关键因素;并在此基础上对SnO2一维纳米结构的生长机理进行了深入的讨论.     

Preparation and annealing study of TaNx coatings on WC-Co substrates

To prevent Co diffusion from cemented carbides at high temperatures, we fabricated TaN_x coatings by reactive direct current (d.c.) magnetron sputtering onto 6 wt.% cobalt cemented carbide substrates, to form diffusion barrier layers. Varying the nitrogen flow ratio, N₂/(Ar + N₂), from 0.05 to 0.4 during the sputtering process had a significant effect on coating structure and content. Deposition rate reduced as the nitrogen flow ratio increased. The effects of nitrogen flow ratio on the crystalline characteristics of the TaN_x coatings were examined by X-ray diffraction. The TaN_x coatings annealing conditions were 500, 600, 700, and 800 °C for 4 h in air. We evaluated the performance of the diffusion barrier using both Auger electron spectroscopy depth-profiles and X-ray diffraction techniques. We also investigated oxidation resistance of the TaN_x coatings annealed in air, and under a 50 ppm O₂-N₂ atmosphere, to evaluate the fabricated layers effectiveness as a protective coating for glass molding dies.