一类替换环的偏序$K_{0}$-群的无扭性

A ring R is called orthogonal if for any two idempotents e and f in R, the condition that e and f are orthogonal in R implies the condition that [eR] and [fR] are orthogonal in K0（R）^＋, i.e., [eR]∧[fR] = 0. In this paper, we shall prove that the K0-group of every orthogonal, IBN2 exchange ring is always torsion-free, which generalizes the main result in [3].     

Strain effects on optical properties of pyramidal InAs/GaAs quantum dots

Strain distribution and optical properties in a self-assembled pyramidal InAs/GaAs quantum dot grown by epitaxy are investigated. A model, based on the theory of linear elasticity, is developed to analyze three-dimensional induced strain field. In the model, the capping material in the heterostructure is omitted during the strain analysis to take into account the sequence of the fabrication process. The mismatch of lattice constants is the driving source of the induced strain and is treated as initial strain in the analysis. Once the strain analysis is completed, the capping material is added back to the heterostructure for electronic band calculation. The strain-induced potential is incorporated into the three-dimensional steady-state Schrödinger equation with the aid of Pikus–Bir Hamiltonian with modified Luttinger–Kohn formalism for the electronic band structure calculation. The strain field, the energy levels and wave functions are found numerically by using of a finite element package FEMLAB. The energy levels as well as the wave functions of both conduction and valence bands of quantum dot are calculated. Finally, the transition energy of ground state is also computed. Numerical results reveal that not only the strain field but also all other optical properties from current model show significant difference from the counterparts of the conventional model.     

大面积α-Fe2O3纳米线及纳米带阵列的制备研究

以铁箔为原材料和基片,通过控制热氧化过程中的宏观实验条件(载气流量及其组分、压强、温度分布和反应时间等),实现了α-Fe2O3一维纳米结构的可控生长,获得了大面积(10mm×10mm)、单分散性好、沿[110]方向生长的α-Fe2O3纳米带或纳米线阵列. 对不同宏观实验条件下所制备的样品进行形貌和晶格结构表征和分析,认为热氧化过程中α-Fe2O3一维纳米结构的生长遵循类似气-固机制的顶端生长模式,生长点铁原子和氧原子比是控制α-Fe2O3一维纳米结构生长的关键因素.     

Analysis of a conducting fluid in a thin annulus with rotating insulated walls under radial magnetic effect

This work considers an electrically conducting fluid filled between two concentric cylindrical walls relatively close to each other. A theoretical solution for the steady Taylor–Couette flow between these two electrically insulated rotating cylinders under the influence of a radial magnetic field is provided in this work. By solving the appropriate set of governing equations simultaneously, the profiles of fluid tangential velocity component and induced magnetic field were obtained as complicated functions involving the modified Bessel functions of the first and second kinds of the first-order in terms of radial coordinates and Hartmann number. A computational study was also performed to validate the present theoretical solution. The analytical and computational results are identical when Ha = 1 while these results only slightly deviate from each other as Ha increases. Current results show that, the presence of the external magnetic field causes the flow close to the slower cylinder to accelerate while that close to the faster cylinder to decelerate. This has clearly implied the fact that an external magnetic field tends to make the velocity distribution across the inner and outer cylinders more uniform.     

Cost impact of float loss on a project with adjustable activity durations

Although delays to non-critical activities within the float do not always affect the overall completion time of a project, they commonly cause disputes over the impact cost and apportionment resulting from the complexity of resource utilization in construction projects. Therefore, considerable attention has been focused on providing an effective and reliable method for analysing the effects of float loss. Several recent studies have proposed various methods; however, most of these methods are based on the assumption of a fixed duration for each activity or activity-based cost simulation. Few studies have considered the trade-off between time and costs and the integration of project resources. Using genetic algorithms, this study introduces a critical path method (CPM)-modified resource-integrated optimization model and successfully quantifies the impact of float loss on the total cost of the project. The results provide objective quantification for accurately evaluating the impact of within-float delays and facilitate the analysis of the impact of delay claims on cost and apportionment in construction projects.     

Evaluation of natural recharge of Chingshui geothermal reservoir using tritium as a tracer

Naturally existing tritium in groundwater was applied as a tracer to evaluate the natural recharge of the Chingshui geothermal reservoir. The residence time (or, age) of Chingshui geothermal water was first determined with tritium data at 15.2 and 11.3 year using the plug flow and dispersive model, respectively. The annual natural recharge was then estimated by combining the use of the residence time and the fluid-in-place of the Chingshui geothermal reservoir. The natural recharge for Chingshui geothermal reservoir was estimated at 5.0 × 10⁵ and 6.7 × 10⁵ m³ year^?1 using the plug flow and dispersive model, respectively. Chingshui geothermal water is largely from a fractured zone in the Jentse Member of the Miocene Lushan Formation. The dispersive model more adequately represents the fracture flow system than the simple plug flow model.     

Optimization of microcrystalline silicon thin film solar cell isolation processing parameters using ultraviolet laser

This study used ultraviolet laser to perform the microcrystalline silicon thin film solar cell isolation scribing process, and applied the Taguchi method and an L₁₈ orthogonal array to plan the experiment. The isolation scribing materials included ZnO:Al, AZO transparent conductive film with a thickness of 200 nm, microcrystalline silicon thin film at 38% crystallinity and of thickness of 500 nm, and the aluminum back contact layer with a thickness of 300 nm. The main objective was to ensure the success of isolation scribing. After laser scribing isolation, using the minimum scribing line width, the flattest trough bottom, and the minimum processing edge surface bumps as the quality characteristics, this study performed main effect analysis and applied the ANOVA (analysis of variance) theory of the Taguchi method to identify the single quality optimal parameter. It then employed the hierarchical structure of the AHP (analytic hierarchy process) theory to establish the positive contrast matrix. After consistency verification, global weight calculation, and priority sequencing, the optimal multi-attribute parameters were obtained. Finally, the experimental results were verified by a Taguchi confirmation experiment and confidence interval calculation. The minimum scribing line width of AZO (200 nm) was 45.6 μm, the minimum scribing line width of the microcrystalline silicon (at 38% crystallinity) was 50.63 μm and the minimum line width of the aluminum thin film (300 nm) was 30.96 μm. The confirmation experiment results were within the 95% confidence interval, verifying that using ultraviolet laser in the isolation scribing process for microcrystalline silicon thin film solar cell has high reproducibility.     

Lot‐sizing policies for deterioration items under two‐level trade credit with partial trade credit to credit‐risk retailer and limited storage capacity

The main purpose of this article is to investigate the optimal wholesaler's replenishment decisions for deterioration items under two levels of the trade credit policy and two storage facilities in order to reflect the supply chain management situation within the economic order quantity framework. In this study, each of the following assumptions have been made: (1) The own warehouse with limited capacity always is not sufficient to store the order quantity, so that a rented warehouse is needed to store the excess units over the capacity of the own warehouse; (2) The wholesaler always obtains the partial trade credit, which is independent of the order quantity offered by the supplier, but the wholesaler offers the full trade credit to the retailer; (3) The wholesaler must take a loan to pay his or her supplier the partial payment immediately when the order is received and then pay off the loan with the entire revenue. Under these three conditions, the wholesaler can obtain the least costs. Furthermore, this study models the wholesaler's optimal replenishment decisions under the aforementioned conditions in the supply chain management. Two theorems are developed to efficiently determine the optimal replenishment decisions for the wholesaler. Finally, numerical examples are given to illustrate the theorems that are proven in this study, and the sensitivity analysis with respect to the major parameters in this study is performed. Copyright © 2016 John Wiley & Sons, Ltd.     

Large‐Area Aminated‐Graphdiyne Thin Films for Direct Methanol Fuel Cells

A two‐dimensional (2D) carbon nanofilm with uniform artificial nanopores is an ideal material to ultimately suppress the fuel permeation in the proton exchange membrane fuel cells. Graphdiyne has great mechanical strength, high dimensional stability, and controllable nanopores, and has good prospects to play this crucial role. It is found that graphdiyne nanofilm with amino groups and natural nanopores can be easily prepared with high integrity. The aminated graphdiyne has good compatibility with the Nafion matrix owing to the acid–base interaction between them. The excellent comprehensive properties of graphdiyne in selectivity, dimensional stability, and integrity effectively improve the power performance and stability of fuel cells at wide temperature. Our results can be developed into a universal method that can easily realize the selective separation of ions and small molecules, and open a new way for the emerging applications in green energy.     

Cooperatively assembled liquid crystals enable temperature-controlled Förster resonance energy transfer

Balancing the rigidity of a π-conjugated structure for strong emission and the flexibility of liquid crystals for self-assembly is the key to realizing highly emissive liquid crystals (HELCs). Here we show that (1) integrating organization-induced emission into dual molecular cooperatively-assembled liquid crystals, (2) amplifying mesogens, and (3) elongating the spacer linking the emitter and the mesogen create advanced materials with desired thermal–optical properties. Impressively, assembling the fluorescent acceptor Nile red into its host donor designed according to the aforementioned strategies results in a temperature-controlled Förster resonance energy transfer (FRET) system. Indeed, FRET exhibits strong S-curve dependence as temperature sweeps through the liquid crystal phase transformation. Such thermochromic materials, suitable for dynamic thermo-optical sensing and modulation, are anticipated to unlock new and smart approaches for controlling and directing light in stimuli-responsive devices.

A temperature-sensitive Förster resonance energy transfer system was constructed using a highly emissive liquid crystal co-assembled with Nile red, enabling thermo-optical modulation for controlling and directing light in stimuli-responsive devices.