Preparation of poly(p‐oxybenzoyl) crystals using direct polymerization of p‐hydroxybenzoic acid in the presence of boronic anhydrides

Poly(p‐oxybenzoyl) (POB) crystals were prepared by reaction‐induced crystallization during direct polymerization of p‐hydroxybenzoic acid in the presence of boronic anhydrides. Polymerizations were carried out at 300 °C in dibenzyltoluene at a concentration of 1% with three kinds of anhydrides of boronic acid such as 3,4,5‐trifluorophenylboronic acid (TFB), 4‐methoxyphenylboronic acid (MPB) and 4‐biphenylboronic acid (BPB). The POB crystals were formed as precipitates in the solution and the morphology was considerably influenced by both the structure of the boronic anhydride and its concentration (c_B). Needle‐like crystals were firmed in the presence of TFB anhydride (TFBA) at c_Bs of 5 and 10 mol % by the spiral growth of lamellae. Spherical aggregates of slab‐like crystals were formed at c_Bs from 50 to 100 mol %. The polymerization with MPB anhydride and BPB anhydride (BPBA) also yielded the needle‐like crystals at c_Bs of 50 and 5 mol %, respectively. The polymerization with TFBA at lower c_B was favorable to prepare the needle‐like crystal. Molecular weight was also influenced by the structure of the boronic anhydride and c_B. M_n increased generally with c_B and BPBA gave the highest M_n of 14.7 × 10³ at c_B of 100 mol %. The loose packing of the molecules in the crystal caused by the bulkiness of the end‐groups made the polymerization in the crystals more efficiently. Morphology and molecular weight of the POB crystals could be controlled by the chemical structure and the content of boronic anhydride. © 2010 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem, 2011.     

Anomalous thermochromic transition of poly(di‐n‐octylsilane)

The thermochromic behavior of poly(di‐n‐octylsilane) {[Si(C₈H₁₇)₂]_n; PDOS} was studied by ultraviolet (UV) absorption, differential scanning calorimetry, and X‐ray diffraction measurements. The structure of PDOS in the low‐temperature phase strongly depended on not only the temperature but also the rate of cooling, that is, the thermal history. Temperature‐dependent UV absorption spectra were highly dependent on thermal hysteresis. Cooled rapidly (10 K/min), PDOS showed two absorption peaks at 3.32 and 3.51 eV in low‐temperature‐ordered phases, whereas a single absorption peak at 3.32 eV became predominant with slow cooling (0.3 K/min). The appearance of the two peaks at low temperatures suggested that a mixture of different conformations was introduced by rapid cooling. A fiber diffraction pattern measured at 240 K after rapid cooling also showed evidence of the existence of novel conformation. A temperature‐dependent powder X‐ray diffraction pattern changed significantly between 270 and 280 K. Rapid cooling reduced the intensity of the X‐ray diffraction peak in this temperature region. This intensity change was explained by the conformational mixture in the polymer. © 2001 John Wiley & Sons, Inc. J Polym Sci B: Polym Phys 39: 1085–1092, 2001     

Preparation of open tubular solid-phase extraction column with 5-amino-8-hydroxyquinoline-modified gold nanoparticle phase for the enrichment of heavy metal ions.

A 5-amino-8-hydroxyquinoline (AHQ)-modified gold nanoparticle (GNP) layer was fabricated on an inner wall of a silica capillary column by alternatively passing a citrate-stabilized GNP solution and an AHQ solution in a repeating fashion. The observations by a field emission scanning electron microscope showed that the thickness of the resulting GNP layer was about 0.15 microm. This column was then used as an open tubular solid-phase extraction column for cadmium, followed by electrothermal atomic absorption spectrometric determination. The detection limit of 0.009 ng ml(-1) was obtained.     

Positive Galois coverings of self-injective algebras

In the article, we study the structure of Galois coverings of self-injective artin algebras with infinite cyclic Galois groups. In particular, we characterize all basic, connected, self-injective artin algebras having Galois coverings by the repetitive algebras of basic connected artin algebras and with the Galois groups generated by positive automorphisms of the repetitive algebras.     

Computation of transition to turbulence in the compression stage of a reciprocating engine

The transition to turbulent flow in the compression stage of a reciprocating engine is studied by obtaining the finite-difference numerical solutions to the governing Navier-Stokes equations without using explicit turbulence models. A computational method is developed under the assumption that the flow is in a low-subsonic regime with strong compression. The numerical method is a simple extension of the well known MAC method. Computations were performed for three different chamber geometries at the engine speed of 1400 rpm. The results of the computations clearly demonstrate the transient process in which large tumbling vortices break down into smaller ones near the end of the compression process. The transition process is also caught experimentally by using Mach-Zehnder interferometry.     

ChemInform Abstract: The Crystal Structures of m,o‐Ce3Pt4Sn6 and Ce1‐xPt6Al13+2x.

Single crystals of Ce₃Pt₄Sn₆ (I) and Ce_1‐xPt₆Al_13+2x (x = 0.207, (II)) are isolated by mechanical fragmentation of specimens grown from self‐fluxes (Sn or Al, resp.) by slow cooling from the melt.     

A simplified optical method for measuring residual stress by rapid cooling in thermosetting resin strip

This paper presents a simplified optical method for measuring the residual stresses by rapid cooling in thermosetting resin strips. First, the fundamental equations for calculating the residual stress from the residual birefringence were obtained by the linear photoviscoelastic theory. The specimens were then subjected to rapid cooling. After rapid cooling, the residual stress was measured by two methods, the simplified optical method mentioned above and the well-known layer-removal method. The effectiveness of the simplified optical method was discussed by comparing results of the two methods.     

4-(cyanomethyl)anilinium perchlorate: a new displacive-type molecular ferroelectric

A new organic ferroelectric compound, 4-(cyanomethyl)anilinium perchlorate, proceeds a second-order phase transition from a paraelectric phase (P2(1)/m) to a ferroelectric phase (P2(1)) at 184 K. A perfect ferroelectric hysteresis loop was observed even at 10 KHz. It is the first example of a molecule-based organic ferroelectric whose polarization can be switched at such a high frequency. The temperature dependent second harmonic generation effect shows that the second-order nonlinear coefficient is nearly zero above T(c) and proportional to the spontaneous polarization below T(c), suggesting the occurrence of symmetry breaking, in good agreement with crystal structural determination. The origin of ferroelectricity was ascribed to the displacements of -NH(3)(+) cations and ClO(4)(-) anions from the symmetric positions including a small part of the order-disorder behaviors of the ClO(4)(-) anions.