Determination of sulfates of androsterone and epiandrosterone in human serum using isotope diluted liquid chromatography-electrospray ionization-mass spectrometry

A promising liquid chromatography-electrospray ionization-mass spectrometry (LC-ESI-MS) for analysis of the sulfates of 5alpha-androgen, androsterone and epiandrosterone (A-S and EpiA-S) in human serum was developed. The method was used to assess one of the markers of 5alpha-reductase activity of males including patients with prostate cancer (PC). After deproteinization with acetonitrile, the androgen sulfates and the internal standard, [7,7,16,16-2H4]dehydroepiandrosterone-S, were extracted from human serum using a solid-phase extraction cartridge and washed with hexane. The extract was reconstituted and applied to the LC/ESI-MS system operated in the selected ion monitoring mode. The method was validated over the range 0.02-5 microg/mL (A-S) and 0.005-1.5 microg/mL (EpiA-S) using 10 microL of human serum. The method was a concise procedure without chemical or enzymatic hydrolysis of the conjugates, purification by high-performance liquid chromatography and/or derivatization, and proved to be satisfactory in its reproducibility and accuracy. The levels of these androgen sulfates tended to decrease during aging, and the A-S levels in the sera obtained from both healthy males and patients with PC were correlated with their EpiA-S levels.     

Ligand-exchange ion chromatographic determination of malic acid enantiomers in apple juice with photometric detection.

An ion chromatographic separation with photometric detection using a chiral copper(II) complex as the eluent has been developed for the resolution of enantiomers of malic acid in commercially available apple juices. The results obtained by this method were in good agreement with those by an enzymatic method with separation by high-performance liquid chromatography.     

Hair analysis of nicotine and cotinine for evaluating tobacco smoke exposure by liquid chromatography-mass spectrometry

A simple liquid chromatography-electrospray ionization mass spectrometry (LC-ESI-MS) method for the determination of nicotine and cotinine in human hair was established. In the procedure, a hair sample (10 mg) was washed with dichloromethane and digested in 2.5 M sodium hydroxide. The digest was extracted with dichloromethane and then 25 mM hydrochloric acid in methanol was added to the extract, to prevent loss of analytes. The solution was evaporated and redissolved in the mobile phase, methanol/10 mM ammonium acetate (30/70, v/v). A 20 microL aliquot of redissolved solution was subjected to analysis. Nicotine and cotinine in human hair were quantified by using deuterated analytes as internal standards. The quantification limits were 8 microg/L for nicotine and 0.9 microg/L for cotinine. The proposed method was applied to measure the concentrations of nicotine and cotinine in hair of smokers and non-smokers to evaluate their self-reported smoking and exposure to environmental tobacco smoke. In both cases, the method provided good selectivity, accuracy and precision.     

Extraction and spectrophotometric determination of zinc in coal fly ash and pond sediments with 2-[2-(3,5-dibromopyridyl)azo]-5-dimethylaminobenzoic acid

An extraction-spectrophotometric method is described for the determination of traces of zinc with 2-[2-(3,5-dibromopyridyl)azo]-5-dimethylaminobenzoic acid. The reagent forms a stable, blue 1:2 zinc/reagent complex that can be extracted into chloroform. The apparent molar absorptivity of the zinc(II) complex is 1.26 × 10⁵ l mol^?1 cm^?1 at 610 nm in chloroform. The reagent is relatively selective; interferences from cobalt, copper and nickel can be masked with dimethylglyoxime and aluminium and iron with a mixture of sodium fluoride and triethanolamine. The method is applied to the determination of zinc in coal fly ash and pond sediments with good precision and accuracy.     

Methane partial oxidation to formaldehyde with oxygen over SiO2-supported molybdenum oxide catalysts

The formation rate of formaldehyde increases with increasing surface area of SiO₂ support, but the selectivity does not. From the characterization of catalysts using XRD, SEM and Raman spectroscopy, highly dispersed molybdenum oxide was considered to be much more active for the formation of formaldehyde than crystallite forms of MoO₃.     

Prospects of Sol-Gel Process for Spectral Hole-Burning Glasses

Persistent spectral hole burning was studied in Eu³⁺ ions-doped Al₂O₃-SiO₂ glass prepared by a sol-gel method. The gel synthesized by the hydrolysis of Si- and Al-alkoxides and EuCl₃·6H₂O was heated in air and hydrogen gas atmospheres. For the glass heated in air to contain OH bonds, the hole was formed by the photoinduced rearrangement of the OH bonds surrounding the Eu³⁺ ions, and was thermally refilled and erased above 200 K. On the other hand, the glass heated in hydrogen gas showed the hole spectrum above 200 K. It was found that the hole depth was independent of the temperature and was 7% of the total intensity at room temperature. The proposed mechanism was the electron transfer between the Eu³⁺ ions and the defect centers formed in glass matrix.     

Effect of surface covering of lactose carrier particles on dry powder inhalation properties of salbutamol sulfate

The effect of the surface covering of lactose carrier particles on the dry powder inhalation properties of salbutamol sulfate was investigated. Lactose carrier surfaces were covered with sucrose tristearate (J-1803F) by a high-speed elliptical-rotor-type powder mixer (Theta-Composer). In the present study, drug/carrier powder mixtures were prepared consisting of micronized salbutamol sulfate and lactose carriers with various particle surface conditions prepared by surface covering. These powder mixtures were aerosolized by a Jethaler), and the in vitro inhalation properties of salbutamol sulfate were evaluated by a twin impinger. Compared with the powder mixed with uncovered lactose carrier, the in vitro inhalation properties of the powder mixture prepared using the surface covering lactose carrier were significantly different, showing that the in vitro inhalation properties of salbutamol sulfate were improved. In vitro inhalation properties increased with the percentage of J-1803F added. Using this surface covering system would thus be valuable for increasing the inhalation properties of dry powder inhalation with lactose carrier particles.     

Influence of storage humidity on the in vitro inhalation properties of salbutamol sulfate dry powder with surface covered lactose carrier

The influence of storage humidity on the in vitro inhalation properties of salbutamol sulfate dry powder with surface covered lactose carrier was investigated. In the present study, drug/carrier powder mixtures were prepared consisting of micronized salbutamol sulfate and lactose carriers with different particle surface conditions prepared by surface covering. Lactose carrier surfaces were covered with vegetable magnesium stearate (Mg-St-V) by a high-speed elliptical-rotor-type powder mixer (Theta-Composer). These powder mixtures were aerosolized by a Jethaler), and the in vitro inhalation properties of salbutamol sulfate were evaluated by a twin impinger. Compared with the powder mixed with uncovered lactose carrier, the in vitro inhalation properties of the powder mixture prepared using the surface covered lactose carrier were little decreased with increased in relative humidity (RH), showing that the in vitro inhalation properties of salbutamol sulfate were improved at high RH. Using this surface covering technique would thus be valuable for storage humidity of dry powder inhalation (DPI) with lactose carrier particles.     

Dielectric relaxation in the paracrystalline phase in polyacrylonitrile

Thermal expansion and dielectric relaxation of polyacrylonitrile were measured in the temperature range from ?75 to 152°C. at frequencies from 30 cps to 3 Mc./sec. The thermal expansion curve and the temperature dependence of logarithmic relaxation time both show an inflection at 85°C. An x-ray study by Bohn reveals that this inflection comes from the thermal expansion of the paracrystalline phase of this polymer, and consequently the transition at 85°C. and the associated relaxation are ascribed to molecular motion in the paracrystalline phase. The relaxation strength increases with increasing temperature above this point. The transition is caused by freezing of the bending vibration of chains whereas the relaxation results from rotational vibration. The length of segments in this phase is roughly estimated to be ca. 100 A. by comparing the observed relaxation strength with the theory developed on the basis of the above considerations.     

Double percolation effect on the electrical conductivity of conductive particles filled polymer blends

Electrical conductivity of carbon black (CB) filled polymer blends which are incompatible with each other was studied as a function of the polymer's blend ratio. Transmission electron microscope (TEM) analysis shows that CB distributes unevenly in each component of a polymer blend. TEM photographs of phase structure of solvent extracted HDPE/PMMA blend and solvent extraction experiments of PMMA/PP blend detect the blend ratio at which the structural continuity of filler rich phase is formed. The electrical conductivity of polymer blends is found to be determined by two factors. One is the concentration of CB in the filler rich phase and the other is the structural continuity of this phase. This double percolation affects the conductivity of conductive particle filled polymer blends.