Electroactive shape memory effect of radiation cross-linked SBS/LLDPE composites filled with carbon black

The poly(styrene-b-butadiene-b-styrene) (SBS) triblock copolymer and linear low-density polyethylene (LLDPE) were blended and irradiated by γ rays to prepare shape memory polymer (SMP). Different weight fractions of conductive carbon black (CB) were filled into SMP to form a novel electroactive shape memory CB/SBS/LLDPE composite. The CB reinforced radiation cross-linked SBS/LLDPE blends for the improvement of the mechanical weakness and conductivity of SBS/LLDPE bulk and for wide practical engineering uses. The electroactive shape memory CB/SBS/LLDPE composites were investigated by electrical properties, mechanical, dynamic mechanical analysis (DMA), differential scanning calorimetry (DSC), scanning electron microscopy (SEM), and electroactive shape memory effects. It is found that the tensile strength, storage modulus, and resistance against mechanical and thermal mechanical cycle loading in the developed composites increased due to the role of reinforcement of CB. The melting temperatures and volume resistance of the composites decreased with the increment of CB for excellent electrical conductivity of CB. The electroactive shape memory effects of developed CB/SBS/LLDPE composites were affected by CB weight fractions and applied voltage, while good shape recovery could be obtained in the shape recovery test. When the CB fraction is more than 5 wt%, full recovery can be observed after tens of seconds and shape recovery speed increased with CB fractions and voltage increasing. However, the shape recovery rate decreases slightly with increment of cycle times.     

Natural Soft/Rigid Superlattices as Anodes for High-Performance Lithium-Ion Batteries

Volume expansion and poor conductivity are two major obstacles that hinder the pursuit of the lithium-ion batteries with long cycling life and high power density. Herein, we highlight a misfit compound PbNbS₃ with a soft/rigid superlattice structure, confirmed by scanning tunneling microscopy and electrochemical characterization, as a promising anode material for high performance lithium-ion batteries with optimized capacity, stability, and conductivity. The soft PbS sublayers primarily react with lithium, endowing capacity and preventing decomposition of the superlattice structure, while the rigid NbS₂ sublayers support the skeleton and enhance the migration of electrons and lithium ions, as a result leading to a specific capacity of 710 mAh g⁻¹ at 100 mA g⁻¹, which is 1.6 times of NbS₂ and 3.9 times of PbS. Our finding reveals the competitive strategy of soft/rigid structure in lithium-ion batteries and broadens the horizons of single-phase anode material design.     

Enzymatic Building-Block Synthesis for Solid-Phase Automated Glycan Assembly

Automated chemical oligosaccharide synthesis is an attractive concept that has been successfully applied to a large number of target structures, but requires excess quantities of suitably protected and activated building blocks. Herein we demonstrate the use of biocatalysis to supply such reagents for automated synthesis. By using the promiscuous NmLgtB-B β1-4 galactosyltransferase from Neisseria meningitidis we demonstrate fast and robust access to the LacNAc motif, common to many cell-surface glycans, starting from either lactose or sucrose as glycosyl donors. The enzymatic product was shown to be successfully incorporated as a complete unit into a tetrasaccharide target by automated assembly.     

Iron-Catalyzed Radical Relay Enabling the Modular Synthesis of Fused Pyridines from Alkyne-Tethered Oximes and Alkenes

We have rationally designed a new class of alkyne-tethered oximes and applied them in an unprecedented iron-catalyzed radical relay protocol for the rapid assembly of a wide array of structurally new and interesting fused pyridines. This method shows broad substrate scope and good functional-group tolerance and enabled the synthesis of several biologically active molecules. Furthermore, the fused pyridines could be diversely functionalized through various simple transformations, such as cyclization, C−H alkylation, and a click reaction. DFT calculation studies indicate that the reactions involve cascade 1,5-hydrogen atom transfer, 5-exo-dig radical addition, and cyclization processes. Moreover, preliminary biological investigations suggest that some of the fused pyridines exhibit good anti-inflammatory activity by restoring the imbalance of inflammatory homeostasis of macrophages in a lipopolysaccharide-induced model.     

An Enzymatic N-Acylation Step Enables the Biocatalytic Synthesis of Unnatural Sialosides

Chitin is one of the most abundant and cheaply available biopolymers in Nature. Chitin has become a valuable starting material for many biotechnological products through manipulation of its N-acetyl functionality, which can be cleaved under mild conditions using the enzyme family of de-N-acetylases. However, the chemoselective enzymatic re-acylation of glucosamine derivatives, which can introduce new stable functionalities into chitin derivatives, is much less explored. Herein we describe an acylase (CmCDA from Cyclobacterium marinum) that catalyzes the N-acylation of glycosamine with a range of carboxylic acids under physiological reaction conditions. This biocatalyst closes an important gap in allowing the conversion of chitin into complex glycosides, such as C5-modified sialosides, through the use of highly selective enzyme cascades.     

具有优异甲醇耐受性的Rh掺杂PdCu有序金属间化合物纳米粒子增强氧还原电催化

Direct methanol fuel cells (DMFCs), as one of the important energy conversion devices, are of great interest in the fields of energy, catalysis and materials. However, the application of DMFCs is presently challenged because of the limited activity and durability of cathode catalysts as well as the poisoning issues caused by methanol permeation to the cathode during operation. Herein, we report a new class of Rh-doped PdCu nanoparticles (NPs) with ordered intermetallic structure for enhancing the activity and durability of the cathode for oxygen reduction reaction (ORR) and achieving superior methanol tolerance. The disordered Rh-doped PdCu NPs can be prepared via a simple wet-chemical method, followed by annealing to convert it to ordered phases. The results of transmission electron microscopy (TEM), scanning electron microscopy-energy dispersive X-ray spectroscopy (SEM-EDS), power X-ray diffraction (PXRD) analysis and high resolution TEM (HRTEM) successfully demonstrate the formation of near-spherical NPs with an average size of 6.5 ± 0.5 nm and the conversion of the phase structure. The complete phase transition temperatures of Rh-doped PdCu NPs and PdCu are 500 and 400 ℃, respectively. The molar ratio of Rh/Pd/Cu in the as-synthesized Rh-doped PdCu NPs is 5/48/47. Benefitting from Rh doping and the presence of the ordered intermetallic structure, the Rh-doped PdCu intermetallic electrocatalyst achieves the maximum ORR mass activity of 0.96 A·mg^-1 at 0.9 V versus reversible hydrogen electrode (RHE) under alkaline conditions—a 7.4-fold enhancement compared to the commercial Pt/C catalyst. For different electrocatalysts, the ORR activities follow the sequence, ordered Rh-doped PdCu intermetallics > ordered PdCu intermetallics > disordered Rh-doped PdCu NPs > disordered PdCu NPs > commercial Pt/C catalyst. In addition, the distinct structure endows the Rh-doped PdCu intermetallics with highly stable ORR durability with unaltered half-wave potential (E_1/2) and mass activity after continuous 20000 cycles, which are higher than those of other electrocatalysts. Furthermore, the E_1/2 of the Rh-doped PdCu intermetallics decreases by only 5 mV after adding 0.5 mol·L^-1 methanol to the electrolyte, while the commercial Pt/C catalyst negatively shifts by 235 mV and a distinct oxidation peak can be observed. The results indicate that the ORR activity of the Rh-doped PdCu intermetallic electrocatalyst can be well maintained even in the presence of poisoning environment. Our results have demonstrated that Rh-doped PdCu NPs with ordered intermetallic structures is a potential electrocatalyst toward the next-generation high-performance DMFCs.     

A fluorescent probe for the detection of Hg2+ based on rhodamine derivative and modified CdTe quantum dots

Research on Chemical Intermediates - In this paper, Zn doped CdTe quantum dots (CdTe:Zn QDs) was synthesized and imbedded in silica particles via a reverse microemulsion method to form a QDs/silica...     

Antibiotics Separation with MXene Membranes Based on Regularly Stacked High‐Aspect‐Ratio Nanosheets

The uncontrolled release of antibiotics and pharmaceuticals into the environment is a worldwide increasing problem. Thus, highly efficient treatment technologies for wastewater are urgently needed. In this work, seven kinds of typical antibiotics (including water and alcohol soluble ones) are successfully separated from the corresponding aqueous and ethanolic solutions using highly regular laminated membranes. Our membranes are assembled with 2–4 μm titanium carbide nanosheets. The solvent permeance through such titanium carbide membrane is one order of magnitude higher than that through most polymeric nanofiltration membranes with similar antibiotics rejection. This high flux is due to the regular two‐dimensional (2D) structure resulting from the large aspect ratio of titanium carbide nanosheets. Moreover, the electrostatic interaction between the surface terminations and the antibiotics also affects the rejection and enhances the antifouling property. Such 2D titanium carbide membranes further broaden the application scope of laminated materials for separation and purification of high value added drugs in academia and industry.     

Biosurfactant trehalose lipid‐enhanced ultrasound‐assisted micellar extraction and determination of the main antioxidant compounds from functional plant tea

Hydrosoluble trehalose lipid (a biosurfactant) was employed for the first time as a green extraction solution to extract the main antioxidant compounds (geniposidic acid, chlorogenic acid, caffeic acid, and rutin) from functional plant tea (Eucommia ulmoides leaves). Single‐factor tests and response surface methodology were employed to optimize the extraction conditions for ultrasound‐assisted micellar extraction combined with ultra‐high‐performance liquid chromatography in succession. A Box‐Behnken design (three‐level, three‐factorial) was used to determine the effects of extraction solvent concentration (1–5 mg/mL), extraction solvent volume (5–15 mL), and extraction time (20–40 min) at a uniform ultrasonic power and temperature. In consequence, the best analyte extraction yields could be attained when the trehalose lipid solution concentration was prepared at 3 mg/mL, the trehalose lipid solution volume was 10 mL and the extraction time was set to 35 min. In addition, the recoveries of the antioxidants from Eucommia ulmoides leaves analyzed by this analytical method ranged from 98.2 to 102%. These results indicated that biosurfactant‐enhanced ultrasound‐assisted micellar extraction coupled with a simple ultra‐high‐performance liquid chromatography method could be effectively applied in the extraction and analysis of antioxidants from Eucommia ulmoides leaf samples.     

17.1%-Efficiency organic photovoltaic cell enabled with two higher-LUMO-level acceptor guests as the quaternary strategy

Quaternary blended organic solar cells utilize four blended material components(one donor plus three acceptors, two donors and two acceptors, or three donors plus one acceptor) as the active layer materials. The use of four material components allows us to have more material selections and more mechanism choices to improve the photon-to-electron conversion efficiency. In this contribution, we present a new case of quaternary material system, that shows 17.1% efficiency obtained by adding IDIC and PC_(71)BM as the guest acceptors of the host binary of PM6:Y6. The lowest unoccupied molecular orbital(LUMO) levels of IDIC and PC_(71)BM are both higher than that of Y6, which is one reason to obtain increased open-circuit voltage(V_(oc)) in the quaternary device. Upon introduction of IDIC and PC_(71)BM as the acceptor guests, the hole and electron mobilities are both increased, which contributes to the increased short-circuit current-density(J_(sc)). Effects of the weight ratios of the three acceptor components are investigated, which demonstrates that the increased hole and electron mobilities, the accelerated hole-transfer, and the reduced monomolecular recombination are the factors contributing to the increased J_(sc)and fill-factor. This case of quaternary device demonstrates the applicability of the quaternary strategy in increasing the device functions and hence the efficiencies in the field of organic photovoltaic cells.