自动石墨消解–电感耦合等离子体质谱法同时测定左氧氟沙星胶囊中7种金属元素

建立自动石墨消解-电感耦合等离子体质谱法(ICP-MS)同时测定左氧氟沙星胶囊中铅、铬、砷、镉、锡、铝、铁7种金属元素含量的方法。以HNO3-H2O2()体积比为1∶1为消解体系,采用自动石墨消解法消解左氧氟沙星胶囊样品,消解液除酸后,用5%硝酸溶液定容至50 mL,采用电感耦合等离子体质谱法对消解液进行测定,以内标法定量。铅、铬、砷、镉、锡、铝、铁的质量浓度在0.05~20.0μg/mL范围内与质谱响应值成良好的线性关系,相关系数均大于0.998,方法检出限为0.119~1.323μg/kg。样品加标回收率为91.2%~105.5%,测定结果的相对标准偏差为1.67%~3.46%(n=6)。该方法样品前处理简单,检出限低,测定结果准确,适用于左氧氟沙星胶囊等沙星类抗生素中多种金属元素残留的测定。     

密度检定液配制及注意事项

根据密度计的工作和检定原理,介绍各种密度检定液的配制方法及注意事项。针对硫酸氢乙酯检定液难以配制问题,着重介绍了检定液的配制过程,通过对不同浓度酒精液配制的硫酸氢乙酯校准密度计的比较实验,说明了不同体积分数酒精液配制的硫酸氢乙酯对校准结果的影响。     

Joint L1/Lp-regularized minimization in video recovery of remote sensing based on compressed sensing

L₁ regularization and L_p regularization are proposed for processing recovered images based on compressed sensing (CS). L₁ regularization can be solved as a convex optimization problem but is less sparse than L_p (0 < p < 1). L_p regularization is sparser than L₁ regularization but is more difficult to solve. This paper proposes joint L₁/L_p (0 < p < 1) regularization, which combines L_p regularization and L₁ regularization. This joint regularization is applied to recover video of remote sensing based on CS. Joint regularization is sparser than L₁ regularization but is as easy to solve as L₁ regularization. A linearized Bregman reweighted iteration algorithm is proposed to solve the joint L₁/L_p regularization problem. The performance and capabilities of the linearized Bregman algorithm and linearized Bregman reweighted algorithm for solving the joint L₁/L_p regularization model are analyzed and compared through numerical simulations.     

Rapid matching algorithm for hyperspectral image based on norm sifting

We propose a rapid spectral matching method by lowering number of comparisons, processing time can be saved. Firstly, 1-norm is chosen as length measure of spectrum, and with this criterion, a 1-norm database is built. Secondly, a subspace is constructed from the whole reference library by retaining the references with the most similar 1-norm values. Finally, matching operations are performed in the subspace to obtain the match result. Simulations of geological mapping with ASTER spectral library show that the proposed method can significantly reduce processing time and enhance accuracy compared with traditional and dimension reduction methods.     

Synthesis of broadband and flat parametric gain by idler loss in optical fiber

Besides dispersion engineering, idler-band distributed fiber loss provides a new synthesis freedom to flatten and broaden the gain spectrum for a fiber-optic parametric amplifier. This interesting phenomenon is based on the fact that the power balance between signal and idler is broken by idler loss, which changes the power conversion process in four-wave-mixing. The pump-to-signal conversion efficiency is kept unchanged in spite of the loss.     

Application of Graphene as a Sorbent for Simultaneous Preconcentration and Determination of Trace Amounts of Cobalt and Nickel in Environmental Water and Vegetable Samples

A new method using a column packed with graphene as adsorbent was developed for the preconcentration of trace amounts of cobalt (Co) and nickel (Ni) prior to their determinations by flame atomic absorption spectrometry. Several factors influencing the extraction efficiency of Co and Ni and their subsequent determinations, such as pH, amounts of the chelating agent, flow rates of sample and eluent solution, eluent type and its volume, breakthrough volume, and adsorption capacity were established. Under the optimum conditions, the calibration graphs were linear in the range of 4.0‐200.0 μg L^?1 and 5.0‐200.0 μg L^?1 with detection limits of 0.36 μg L^?1 and 0.51 μg L^?1 for Co and Ni, respectively. Good relative standard deviations for ten determinations of 100.0 μg L^?1 of Co and Ni were 3.2 and 3.6%, respectively. The results for determination of Co and Ni in tap water, river water, sea water, vegetable and spiked samples have demonstrated the accuracy and applicability of the proposed method. To validate the proposed method, three certified reference materials of environment water (GSBZ 50030‐94 and GSB 07‐1186‐2000) and tomato leaf (GSBZ 51001‐94) were analyzed, and the determined values were in good agreement with the certified values.     

Effect of Manganese Valence on Specific Capacitance in Supercapacitors of Manganese Oxide Microspheres

Manganese oxides have attracted great interest in electrochemical energy storage due to high theoretical specific capacitance and abundant valence states. The multiple valence states in the redox reactions are beneficial for enhancing the electrochemical properties. Herein, three manganese microspheres were prepared by a one-pot hydrothermal method and subsequent calcination at different temperatures using carbon spheres as templates. The trivalent manganese of Mn₂O₃ exhibited multiple redox transitions of Mn³⁺/Mn²⁺ and Mn⁴⁺/Mn³⁺ during the intercalation/deintercalation of electrolyte ions. The possible redox reactions of Mn₂O₃ were proposed based on the cyclic voltammetry and differential pulse voltammogram results. Mn₂O₃ microsphere integrated the advantages of multiple redox couples and unique structure, demonstrating a high specific capacitance and long cycling stability. The symmetric Mn₂O₃//Mn₂O₃ device yielded a maximum energy density of 29.3 Wh kg⁻¹ at 250 W kg⁻¹.     

Interfacial passivation mechanism of sulfide towards quantum dot-sensitized nanocrystalline thin films

Journal of Solid State Electrochemistry - We report on the interfacial passivation mechanism in CdSe quantum dot-sensitized ZnO nanocrystalline thin film, where different sulfide semiconductors...     

Star-PDMAEMA-β-CD-Stabilized Colloidal Gold Nanoparticles: Synthesis,Characterization and pH-Controlled Assembly

Colloidal gold nanoparticles were prepared through in situ reduction in the presence of water-soluble star homopolymer with β-cyclodextrin core and poly[2-(dimethylamino) ethyl methacrylate] arms (star PDMAEMA-β-CD) at ambient temperature. In this process, star PDMAEMA-β-CD acted as both reducing agent and stabilizing agent for gold nanoparticles. More importantly, the optical properties and the morphology of star-PDMAEMA-β-CD-stabilized colloidal gold nanoparticles were sensitive to the solution pH due to structural changes of the polymer. Different assemblies can be formed by tuning the pH of the medium. Fourier transform infrared (FT-IR), UV-Vis absorption spectroscopy, transmission electron microscopy (TEM), dynamic laser light scattering (DLS) and X-ray diffraction (XRD) were used to characterize the synthetic gold nanoparticles and the pH-controlled assembly of gold nanoparticles.