Dynamic PIV measurement of a high-speed flow issuing from vent-holes of a curtain-type airbag

A curtain-type airbag is a safety device designed to protect passengers from the side collisions of a car. The curtain-type airbag system consists of an inflator, a fill-hose, and a curtain-airbag. The fill-hose is a passageway and distributor of the exploded gases from the inflator to the airbag through vent-holes. Although the design of vent-holes is important for proper deployment of the airbag, it is very difficult to measure the exceedingly high speed flow issuing from the vent-holes by using conventional measurement methods. In this study, we employed a dynamic PIV technique to measure the temporal evolution of instantaneous velocity fields of the flow ejecting from the vent-holes. From the velocity field data measured at a frame rate of 2000 fps, the temporal variation of the volume flux from vent-holes was also evaluated for the diagnosis of airbag performance. The flows ejecting from the vent-holes showed high velocity fluctuations, and the maximum velocity was about 480 m/s. The instantaneous velocity fields in the initial stage showed a swaying motion of a high-speed jet. The accumulated volume flux from the vent-holes was also compared at each vent-hole region.     

Nonresonant two-photon generation of excitonic matter in a CuCl pellet

A pressed CuCl pellet is optically excited at 2 K using an excitation energy in the range from 1892 to 2843 meV, which is far below the bandgap. The steady-state population dynamics unambiguously indicates an unusual two-photon generation of ground-state excitons. At high-excitation levels, the observed spectra exhibit rich spectral features arising from electron-hole plasma and electron-hole droplets formation. This nonresonant two-photon excitation is presumably assisted by impurity bands due to grain boundaries and surfaces in this random semiconductor.     

An enhanced common path interference optic measurement system for refractive indices and thickness

This study proposes a common path interference optical system for the measurement of refractive indices and thickness of uniaxial crystal material. The measurement system comprises an accurate Mach–Zehnder laser interferometer, a single-axis rotary stepping motor, and a computer. The laser interferometer is composed of a single-frequency He–Ne laser, two-beam splitters and two reflectors. The Mach–Zehnder laser interferometer measures the optical length difference by using its linear measurement accuracy. The proposed solution procedure enables both the refractive indices and the thickness of the optical waveplate to be obtained. The proposed design differs from conventional designs in that it does not use a heterodyne modulator with a lock-in technique. It is shown that the refractive indices and thickness of the tested optical elements can be measured rapidly and accurately.     

Nonlinear optical characteristics of monolayer MoSe2

In this study, we utilized picosecond pulses from an Nd:YAG laser to investigate the nonlinear optical characteristics of monolayer MoSe₂. Two‐step growth involving the selenization of pulsed‐laser‐deposited MoO₃ film was employed to yield the MoSe₂ monolayer on a SiO₂/Si substrate. Raman scattering, photoluminescence (PL) spectroscopy, and atomic force microscopy verified the high optical quality of the monolayer. The second‐order susceptibility χ⁽²⁾ was calculated to be ～50 pm V^?1 at the second harmonic wavelength ～810 nm, which is near the optical gap of the monolayer. Interestingly, our wavelength‐dependent second harmonic scan can identify the bound excitonic states including negatively charged excitons much more efficiently, compared with the PL method at room temperature. Additionally, the MoSe₂ monolayer exhibits a strong laser‐induced damage threshold ～16 GW cm^?2 under picosecond‐pulse excitation_. Our findings suggest that monolayer MoSe₂ can be considered as a promising candidate for high‐power, thin‐film‐based nonlinear optical devices and applications.     

Performance limits of pico-cell systems using radio-over-fiber techniques with an electroabsorption modulator

We investigate the performance limits of a pico-cell system using the radio- over-fiber technique with an electroabsorption modulator (EAM) in a 2.4 GHz wireless local area network (WLAN) environment. To understand the performance limits of the system using an EAM as the optical transceiver, we vary the optical modulation index (OMI) of the transmitter for different bias voltages to the EAM. Power margins in the links are found to estimate a possible service range, and packet loss rates (PLRs) in the pico-cell system are measured to evaluate the transmission performance. The total service range can be extended up to 3 m by adjusting the OMI of the transmitter for different applied bias voltages to the EAM.     

Strong visible PL from the nc-Si thin film by Ni silicide mediated crystallization

We studied the growth of nanocrystalline silicon (nc-Si) thin film exhibiting a strong room temperature photoluminescence (PL) at 1.81–2.003 eV. The amorphous silicon was crystallized by Ni silicide mediated crystallization (Ni SMC) and then Secco-etched to exhibit the PL. The PL peak energy and intensity increase with increasing the metal density on the a-Si because of the reduction in the grain size down to 2 nm. The photoluminescence energy and peak intensity depend strongly on the Secco etch time because the grain size is reduced by etching the grain boundaries.     

Measurement of branching fractions for B-->eta(c)K(*) decays

We report measurements of branching fractions for charged and neutral B-->eta(c)K decays where the eta(c) meson is reconstructed in the K(0)(S)K+/-pi(-/+), K+K-pi(0), K(*0)K-pi(+), and pp; decay channels. The neutral B0 channel is a CP eigenstate and can be used to measure the CP violation parameter sin(2phi(1). We also report the first observation of the B0-->eta(c)K(*0) mode. The results are based on an analysis of 29.1 fb(-1) of data collected by the Belle detector at KEKB.     

Electrophoretic separation of gold nanoparticles according to bifunctional molecules‐induced charge and size

Gold nanospheres modified with bifunctional molecules have been separated and characterized by using agarose gel electrophoresis as well as optical spectroscopy and electron microscopy. The electrophoretic mobility of a gold nanosphere capped with 11‐mercaptoundecanoic acid (MUA) has been found to depend on the number of MUA molecules per gold nanosphere, indicating that it increases with the surface charge of the nanoparticle. The extinction spectrum of gold nanospheres capped with MUA at an MUA molecules per gold nanosphere value of 1000 and connected via 1,6‐hexanedithiol (HDT) decreases by 33% in magnitude and shifts to the red as largely as 22 nm with the increase of the molar ratio of HDT to MUA (R_HM). Gold nanospheres capped with MUA and connected via HDT have been separated successfully using gel electrophoresis and characterized by measuring reflectance spectra of discrete electrophoretic bands directly in the gel and by monitoring transmission electron microscope images of gold nanoparticles collected from the discrete bands. Electrophoretic mobility has been found to decrease substantially with the increment of HDT to MUA, indicating that the size of aggregated gold nanoparticles increases with the concentration of HDT.     

Iodonium Metathesis Reactions

A metathesis reaction occurs when a diaryliodonium triflate is heated with an aryl iodide, resulting in the formation of a new diaryliodonium triflate.