Effects of post-annealing on the structural and nanomechanical properties of Ga-doped ZnO thin films deposited on glass substrate by rf-magnetron sputtering

In this study, the effects of post-annealing on the structure, surface morphology and nanomechanical properties of ZnO thin films doped with a nominal concentration of 3 at.% Ga (ZnO:Ga) are investigated using X-ray diffraction (XRD), atomic force microscopy (AFM) and scanning electron microscopy (SEM) and nanoindentation techniques. The ZnO:Ga thin films were deposited on the glass substrates at room temperature by radio frequency magnetron sputtering. Results revealed that the as-deposited ZnO:Ga thin films were polycrystalline albeit the low deposition temperature. Post-annealing carried out at 300, 400 and 500 °C, respectively, has resulted in progressive increase in both the average grain size and the surface roughness of the ZnO:Ga thin film, in addition to the improved thin films crystallinity. Moreover, the hardness and Young's modulus of ZnO:Ga thin films are measured by a Berkovich nanoindenter operated with the continuous contact stiffness measurements (CSM) option. The hardness and Young's modulus of ZnO:Ga thin films increased as the annealing temperature increased from 300 to 500 °C, with the best results being obtained at 500 °C.     

High power efficiency in single layer blue phosphorescent organic light-emitting diodes

High efficiency single layer blue phosphorescent organic light-emitting diodes (PHOLEDs) without any charge transport layer were developed. A mixed host of spirobifluorene based phosphine oxide (SPPO13) and 1, 1-bis[(di-4-tolylamino)phenyl]cyclohexane (TAPC) was used as the host in the emitting layer. A high maximum external quantum efficiency of 15.8% and a quantum efficiency of 8.6% at 1000 cd/m² were achieved in the single-layer blue PHOLEDs without any charge transport layer. The maximum power efficiency and power efficiency at 1000 cd/m² were 31.4 and 16.9 lm/W, respectively.     

Influence of ligands on the photoluminescent properties of Eu in europium β-diketonate/PMMA-doped systems

Three kinds of europium β-diketonates Eu(DBM)₃, Eu(BA)₃ and Eu(TTA)₃ (DBM: Dibenzoylmethane; BA: 1-Benzoylacetone; TTA: Thenoyltrifluoroacetone) were doped in poly(methyl methacrylate) (PMMA) matrix. The doped systems were studied by using photoluminescent (PL) spectroscopy, emission decay experiments and X-ray diffractometry. Eu(III) ions in the doped Eu(DBM)₃/PMMA systems have two distinct symmetric sites and the emission band changes greatly with the compositions. Eu(III) in the Eu(BA)₃/PMMA systems gives only one symmetric site in the doped systems and the emission band changes slightly with the compositions. Although two distinct symmetric sites of Eu(III) can be distinguished in the doped systems of Eu(TTA)₃/PMMA, the two sites have similar ⁵D₀ lifetimes and the luminescent spectra almost do not change with the compositions. XRD reveals that crystallites were formed in the doped Eu(DBM)₃/PMMA systems that have different crystalline structure from that of the chelate, and Eu(BA)₃ and Eu(TTA)₃ exist in amorphous state in the doped systems. The difference between the PL properties and structures of the doped systems for the three kinds of chelates should be attributed to different interactions between the chelate molecules and between the chelate and PMMA.     

Effects of device resolution on three-dimensional integral imaging

We present the effects of a finite number of pixels in elemental images on the resolution and the depth of focus in three-dimensional integral imaging (II). We show that the number of pixels in elemental images determines not only the lateral resolution but also the depth resolution. The minimum number of pixels required in each elemental image is calculated to avoid depth-of-focus degradation. We evaluate how II system performance degrades as the number of pixels in each elemental image changes. The product of the depth of focus and the lateral resolution squared is used as the performance metric.     

Enhanced luminescence in ZnGa<Subscript>2</Subscript>O<Subscript>4-x</Subscript>S<Subscript>x</Subscript>:Mn<Superscript>2+</Superscript> thin-film phosphors grown on MgO(100) substrate

Mn-doped ZnGa₂O_4-xS_x thin-film phosphors have been grown using a pulsed laser deposition technique at varying growth conditions. Structural characterization was carried out on a series of ZnGa₂O_4-xS_x:Mn²⁺ films grown on MgO(100) substrates using Zn-rich ceramic targets. Oxygen pressure was fixed at 100 mTorr and substrate temperatures were varied from 500 to 700 °C. The results of X-ray-diffraction patterns showed that the lattice constants of the ZnGa₂O_3.95S_0.05:Mn²⁺ thin films decrease with the substitution of sulfur for the oxygen in ZnGa₂O₄. Measurements of photoluminescence (PL) properties of ZnGa₂O_4-xS_x:Mn²⁺ thin films have indicated that MgO(100) is one of the most promising substrates for the growth of high-quality ZnGa₂O_4-xS_x:Mn²⁺ thin films. In particular, the incorporation of sulfur into the ZnGa₂O₄ lattice could induce a remarkable increase of PL. The highest green-emission intensity was observed with ZnGa₂O_3.95S_0.05:Mn²⁺ films, whose brightness was increased by a factor of 3.5 in comparison with that of ZnGa₂O₄:Mn²⁺ films. This phosphor may be promising for application to flat-panel displays. PACS 78.20.-e; 78.55.-m; 78.66.-w     

Synthesis of nanoparticles and suspensions by pulsed laser ablation of microparticles in liquid

Recent studies demonstrated that the process to produce metal and oxide nanoparticles by laser ablation of consolidated microparticles is a convenient and energy-efficient way to prepare nanoparticles. In this work, the novel process is applied to nanoparticle synthesis in the liquid environment and the results are compared with those by the gas-phase process. Metal and oxide nanoparticles are synthesized by pulsed laser ablation of the compacted metal microparticles using a Q-switched Nd:YAG laser in water. It is shown that the process is effective for preparing nanoparticle suspensions having relatively uniform size distributions. While the laser fluence and the degree of compaction strongly influence the size of the produced nanoparticle in air, the sedimentation time is shown to be the most critical factor to determine the mean size of the suspended particles.     

Evanescent tunneling of an effective surface plasmon excited by convection electrons

We introduce the subwavelength transmission of an effective surface plasmon beyond the light zone via the proximity interaction of convection electrons with a metal grating. A comparative analysis of dielectric homogenization and a finite-difference-time-domain simulation shows that out-of-phase-like modes (pi modes) have strong transmission below the cutoff frequency relying on the parametric condition of structural dimension and electronic energy. The synchronous spatial field and charge distribution of the pi mode system confirms the evanescent tunneling effect of the electron-coupled plasmons.     

Effect of Ca interlayer thickness on electron injection of lithium quinolate/Ca/Al cathodes

Electron injection behavior of lithium quinolate (Liq)/Ca/Al cathode was investigated by using X-ray photoelectron spectroscopy and ultraviolet photoelectron spectroscopy (UPS). Interfacial energy barrier lowering of Liq/Ca/Al cathode was dependent on Ca thickness and maximum energy level shift was observed at a Ca thickness of 1 nm. Maximum current density could be obtained in Liq/Ca/Al device at a Ca thickness of 1 nm and it was well correlated with energy level shift from UPS measurement. Power efficiency of Liq/Al device could be improved by more than 70% by inserting Ca layer between Liq and Al.     

Stimulated emission of free excitons in Cd1−xMnxTe under nonresonant two-photon excitation

We report on free excitons coexisting with exciton magnetic polarons (EMPs) in bulk semimagnetic semiconductors of Cd_1−xMn_xTe for 0.04?x?0.36 at 2 K under nonresonant two-photon excitation. This two-photon excitation not only generates free excitons but also more efficiently creates EMPs compared with ordinary one-photon excitation. Stimulated emission from free excitons is demonstrated under strong two-photon excitation.