Synthesis, Characterization and X-Ray Structure of Bis(O-propyldithiocarbonato-κ2S,S′)bis(4-cyanopyridine-κN)nickel(II)

Abstract  

The [Ni(S₂COCH₂CH₂CH₃)₂(C₆H₄N₂)₂] adduct of 4-cyanopyridine with [Ni(S₂COCH₂CH₂CH₃)₂] was synthesized and characterized by elemental analysis, magnetic susceptibility measurement, IR, electronic spectral data, Thermogravimetric analysis/DTA techniques and X-ray diffraction analysis. The Ni atom in the title complex is octahedrally coordinated within a trans-N₂S₄ donor set, with the Ni atom located on a centre of inversion. The title complex crystallizes in the monoclinic space group P2 ₁ /c with unit cell parameters a = 11.75(4), b = 11.62(3), c = 9.20(2) ?, β = 104.99(3)°. Crystal structure was solved by direct methods and refined by full matrix least squares procedures to a final R-value of 0.0294 for 1895 observed reflections. The packing of layers of molecules is stabilized by weak C–H···N and C–H···π interactions.     

Synthesis and characterization of nanostructured (Pb1− x Sr x )TiO3 thin films by a modified chemical route

The coating solutions of nanostructured (Pb_{1– x} Sr _x )TiO₃ (PST) thin films have been prepared by the sol–gel combined metallo-organic decomposition method. The coating solutions were deposited on Pt/Ti/SiO₂/Si substrates using a spin-coating technique with spinning speed of 4300 rpm and annealed at 650°C. The effect of Sr content in reducing the grain size and tetragonal distortion of PST films has been studied. The optimum conditions for crystalline phase formation in the films have been analyzed by thermogravimetric, differential thermal analysis and Fourier transform infrared spectroscopy. The phase and microstructure of the films were studied by X-ray diffraction (XRD) and atomic force microscopy (AFM). The XRD pattern shows that the PST thin films are crystallized into tetragonal structures without any impurity phase and the distortion ratio reduces with increasing Sr concentration. The AFM results indicate an increase in grain size with increasing annealing temperature of the film and reduction in grain size with increasing Sr concentration.     

Highly Sensitive Synchronous Fluorescence Measurement of Danofloxacin in Pharmaceutical and Milk Samples Using Aluminium (III) Enhanced Fluorescence

A simple, rapid and sensitive constant wavelength synchronous fluorescence method is developed for the determination of danofloxacin (DAN) in pharmaceutical formulations and its residue in milk based on Al(III) enhanced fluorescence. The synchronous fluorescence intensity of the system is measured at 435?nm using ? λ?=?80?nm and an excitation wavelength of 280?nm. A good linear relationship between enhanced fluorescence intensity and DAN concentration is obtained in the range of 3-100?ng?mL(-1)(r (2)?=?0.9991). The limit of detection (LOD, S/N?=?3) of the present method is 0.9?ng?mL(-1). The proposed method can be successfully applied to the determination of DAN in pharmaceutical formulations and in milk without serious interferences from common excipients, metal ions and other co-existing substances. The method can be used as a rapid screening to judge whether the DAN residues in milk exceed Maximum Residue Limits (MRLs) or not.     

Study on the Fluorescence Quenching Reaction of Amitriptyline and Clomipramine Hydrochlorides with Eosin Y and its Analytical Application

Amitriptyline.HCl (AMI) and clomipramine.HCl (CMI) react with eosin Y (EY) in pH 3.8 NaAc-AcH buffer solution to form ion association complex which results in quenching of fluorescence of EY and appearance of a new resonance Rayleigh scattering (RSS) spectrum at 620 nm. The spectral characteristics of absorption, fluorescence and RSS spectra have been investigated. The factors influencing the reaction were studied and optimum conditions for the reaction have been determined. Based on fluorescence quenching, a simple and sensitive spectrofluorimetric method for determination of AMI and CMI has been developed. The fluorescence quenching intensity was measured at 550 nm using an excitation wavelength of 310 nm. The calibration graph was found to be rectilinear in the range 0.08–2.0 μg?mL^?1 with detection limit of 0.017 μg?mL^?1 for AMI and 0.06–2.0 μg?mL^?1 with detection limit of 0.015 μg?mL^?1 for CMI. The method can be satisfactorily applied to the determination of AMI and CMI in tablets without interference from commonly occurring exicipients. The recovery and RSD values obtained indicate good accuracy and precision of the method. The mechanism of the reaction and fluorescence quenching has also been discussed.     

Cyanuric chloride catalyzed mild protocol for synthesis of biologically active dihydro/spiro quinazolinones and quinazolinone-glycoconjugates

We have developed an efficient cyanuric chloride (2,4,6-trichloro-1,3,5-triazine, TCT) catalyzed approach for the synthesis of 2,3-dihydroquinazolin-4(1H)-one (3a-3x), 2-spiroquinazolinone (5, 7), and glycoconjugates of 2,3-dihydroquinazolin-4(1H)-one (10a, 10b) derivatives. The reaction allows rapid cyclization (8-20 min) with 10 mol % cyanuric chloride to give skeletal complexity in good to excellent yield. We believe that this novel procedure may open the door for the easy generation of new and bioactive quinazolinones.     

Calixarene capped ZnS quantum dots as an optical nanoprobe for detection and determination of menadione

In this communication we report a p-sulfonatocalix[4]arene coated ZnS quantum dots "cup type" highly stable optical probe for the detection and determination of menadione (VK(3)) with high sensitivity and selectivity. The detection of VK(3) depends on supramolecular host-guest chemistry.     

Preparation of highly polarized nuclear spin systems using brute-force and low-field thermal mixing

Over the years, several strategies have been developed for generating highly polarized nuclear spin systems, including dynamic nuclear polarization, optical pumping, and methods exploiting parahydrogen. Here, we present an alternative strategy, using an enhanced 'brute-force' approach (i.e. exposure to low temperatures and high applied magnetic fields). The main problem with this approach is that it may take an excessively long time for the nuclear polarization to approach thermal equilibrium at low temperatures, since nuclear relaxation becomes exceedingly slow due to the loss of molecular motion. We show that low-field thermal mixing can alleviate the problem by increasing the rate at which slowly-relaxing nuclei reach equilibrium. More specifically, we show that polarization can be transferred from a relatively rapidly relaxing (1)H reservoir to more slowly relaxing (13)C and (31)P nuclei. The effects are particularly dramatic for the (31)P nuclei, which in experiments at a temperature of 4.2 K and a field of 2 T show a 75-fold enhancement in their effective rate of approach to equilibrium, and an even greater (150-fold) enhancement in the presence of a relaxation agent. The mixing step is also very effective in terms of the amount of polarization transferred-70-90% of the maximum theoretical value in the experiments reported here. These findings have important implications for brute-force polarization, for the problem becomes one of how to relax the solvent protons rather than individual more slowly-relaxing nuclei of interest. This should be a much more tractable proposition, and offers the additional attraction that a wide range of nuclear species can be polarized simultaneously. We further show that the (1)H reservoir can be tapped repeatedly through a number of consecutive thermal mixing steps, and that this could provide additional sensitivity enhancement in solid-state NMR.     

On a class of prime entire functions

In this note it is proved that entire functions of the form Fa（z）=H（z）-aα（z）
where H andα are entire functions, with α having at least one zero, H＇ and α＇having no common zeros and T（r, α） = S（r, H）, are prime in entire sense for most values of a. The class of these functions is seen to contain examples of both periodic and non-periodic prime entire functions found by Noda, Qiao, Urabe and by Singh and Charak. Another result due to Singh and Charak will be improved as well.     

Sodium ion conducting nanocomposite polymer electrolyte membrane for sodium ion batteries

Journal of Solid State Electrochemistry - The paper reports effect of dispersion of titanium dioxide (TiO2) nanofiller on the sodium ion conducting nanocomposite polymer electrolyte membranes...