Hydrothermal conditions on Sn0.95Co0.05O2: nanostructures, ferromagnetism and optical behavior

We have studied the effect of hydrothermal conditions at constant temperature of 180 °C, varying preparation time for 15, 30 and 45 h on nanostructures of diluted magnetic semiconductor Sn_0.95Co_0.05O₂ (SC5). X-ray diffraction pattern confirm the tetragonal SnO₂ rutile phase. The transmission and scanning electron microscopy shows the resulting nanostructures i.e. nanospheres and nanorods. The proposed reaction mechanism is given. The Raman spectra show the formation of tetragonal rutile structure of SC5 nanostructures. Fourier transform infrared spectrum has been used to verify the existence of Sn–O bond. The photoluminescence spectra show that the emission spectral intensity increases gradually with decreasing grains size, increasing hydrothermal heating time of SC5 samples and exhibits an intense blue luminescence centered at a wavelength of 531 nm. The optical absorbance measurements revealed that the nanometric size of the materials influences the energy band gap. All the prepared SC5 samples exhibit room temperature ferromagnetism.     

Ionic conductivity enhancement of PVA: carboxymethyl cellulose poly-blend electrolyte films through the doping of NaI salt

Cellulose - In this paper, we report the effect of doping sodium iodide (NaI) salt into a polymer blend matrix of sodium carboxymethyl cellulose (NaCMC) and poly(vinyl alcohol) (PVA). Solution...     

Design and Development of Ultrafast Sinapic Acid Sensor Based on Electrochemically Nanotuned Gold Nanoparticles and Solvothermally Reduced Graphene Oxide

We report for the first time sinapic acid (SA) sensing based on nanocomposite comprising electrochemically tuned gold nanoparticles (EAuNPs) and solvothermally reduced graphene oxide (rGO). The synthesized EAuNPs, rGO, and EAuNPs‐rGO nanocomposite were characterized using X‐ray diffraction (XRD), transmission electron microscopy (TEM), selected area electron diffraction (SAED), particle size analysis, and Raman spectroscopy. A proof‐of‐concept electrochemical sensor for SA was developed based on synthesized EAuNPs‐rGO nanocomposite, which was characterized by electrochemical techniques such as cyclic voltammetry (CV) and electrochemical impedance spectroscopy (EIS). The developed sensor detected SA with a linear dynamic range (LDR) between 20 μM and 200 μM and detection limit (DL) of 33.43 (±0.21) nM (RSD<3.32 %). To show the useful purpose of the sensor probe in clinical applications, SA was detected in human urine samples, which showed the percentage recovery between 82.6 % and 92.8 %. Interferences due to various molecules such as L‐cystine, glycine, alanine, serum albumin, uric acid, citric acid, ascorbic acid, and urea were tested. Long‐term stability of the sensor probe was examined, which was found to be stable up to 6 weeks. The sensor fabricated using EAuNPs‐rGO nanocomposite has many attractive features such as; simplicity, rapidity, and label‐free detection; hence, it could be a method of choice for SA detection in various matrices.     

Ag NPs decked GO composite as a competent and reusable catalyst for ‘ON WATER’ chemoselective synthesis of pyrano[2,3-c:6,5-c′]dipyrazol]-2-ones

We have synthesized and characterized Ag NPs decked GO composite and studied its role as reusable catalyst for the ‘ON WATER’ chemoselective synthesis of pyranodipyrazolones via the reaction of different carbonyl compounds with 3-methyl-1-phenyl-1H-pyrazol-5(4H)-one. This method illustrates significant selectivity for pyranodipyrazolones over arylmethylene bispyrazolols and arylmethylenepyrazolones. Synergistic effect of heterogenic nature of water with reactants and Ag NPs/GO had profuse outcome on reaction as indicated by high TOF (18.03 × 10^?5 mol g^?1 min^?1). Furthermore, catalyst was recycled for 7-times without significant loss of activity.     

Fine‐Tuning of Lewis Acidity: The Case of Borenium Hydride Complexes Derived from Bis(phosphinimino)amide Boron Precursors

Reactions of bis(phosphinimino)amines LH and L′H with Me₂S ? BH₂Cl afforded chloroborane complexes LBHCl ( 1 ) and L′BHCl ( 2 ), and the reaction of L′H with BH₃ ? Me₂S gave a dihydridoborane complex L′BH₂ ( 3 ) (LH=[{(2,4,6‐Me₃C₆H₂N)P(Ph₂)}₂N]H and L′H=[{(2,6‐iPr₂C₆H₃N)P(Ph₂)}₂N]H). Furthermore, abstraction of a hydride ion from L′BH₂ ( 3 ) and LBH₂ ( 4 ) mediated by Lewis acid B(C₆F₅)₃ or the weakly coordinating ion pair [Ph₃C][B(C₆F₅)₄] smoothly yielded a series of borenium hydride cations: [L′BH]⁺[HB(C₆F₅)₃]^? ( 5 ), [L′BH]⁺[B(C₆F₅)₄]^? ( 6 ), [LBH]⁺[HB(C₆F₅)₃]^? ( 7 ), and [LBH]⁺[B(C₆F₅)₄]^? ( 8 ). Synthesis of a chloroborenium species [LBCl]⁺[BCl₄]^? ( 9 ) without involvement of a weakly coordinating anion was also demonstrated from a reaction of LBH₂ ( 4 ) with three equivalents of BCl₃. It is clear from this study that the sterically bulky strong donor bis(phosphinimino)amide ligand plays a crucial role in facilitating the synthesis and stabilization of these three‐coordinated cationic species of boron. Therefore, the present synthetic approach is not dependent on the requirement of weakly coordinating anions; even simple BCl₄^? can act as a counteranion with borenium cations. The high Lewis acidity of the boron atom in complex 8 enables the formation of an adduct with 4‐dimethylaminopyridine (DMAP), [LBH ? (DMAP)]⁺[B(C₆F₅)₄]^? ( 10 ). The solid‐state structures of complexes 1 , 5 , and 9 were investigated by means of single‐crystal X‐ray structural analysis.     

Estimation of a random coefficient model under linear stochastic constraints

Summary A random coefficient model in which means of random coefficients are subject to a set of linear stochastic constraints is considered and estimators for the means of coefficients are proposed. Their asymptotic properties are presented and some remarks on efficiency are placed.     

2.5 Soils plants and agricultural-technical products

Abstracts2 Particular products and fields of application

2.5 Soils plants and agricultural-technical products     

Development and validation of a highly sensitive LC‐MS/MS‐ESI method for the determination of bicalutamide in mouse plasma: application to a pharmacokinetic study

A highly sensitive, rapid assay method has been developed and validated for the estimation of bicalutamide in mouse plasma using liquid chromatography coupled to tandem mass spectrometry with electrospray ionization in the negative‐ion mode. The assay procedure involves extraction of bicalutamide and tolbutamide (internal standard, IS) from mouse plasma with a simple protein precipitation method. Chromatographic separation was achieved using an isocratic mobile phase (0.2% formic acid:acetonitrile, 35:65, v/v) at a flow rate of 0.5 mL/min on an Atlantis dC₁₈ column (maintained at 40 ± 1°C) with a total run time of 3.0 min. The MS/MS ion transitions monitored were m/z 428.9 → 254.7 for bicalutamide and m/z 269.0 → 169.6 for IS. Method validation was performed as per FDA guidelines and the results met the acceptance criteria. The lower limit of quantitation achieved was 1.04 ng/mL and the linearity range extended from 1.04 to 1877 ng/mL. The intra‐ and inter‐day precisions were in the ranges of 0.49–4.68 and 2.62–4.15, respectively. Copyright © 2012 John Wiley & Sons, Ltd.     

Dye-dependent studies on droplet pattern and electro-optic behaviour of polymer dispersed liquid crystal

In order to study the droplet pattern and electro-optic (EO) behaviour of polymer dispersed liquid crystal (PDLC) with the addition of dye, dichroic polymer dispersed liquid crystal (DPDLC) films were prepared using a nematic liquid crystal (NLC), photo-curable polymer (NOA 65) and anthraquinone blue dichroic dye (B2), in equal ratio (1:1) of polymer and liquid crystal (LC) by polymerisation induced phase separation (PIPS) technique. Dichroic dye was taken in different concentration (wt./wt. ratio) as 0.0625%, 0.125%, 0.25%, 0.5% and 1% of the LC mixture in DPDLC films. Initially, in an open circuit when there is no proviso for external electric field (0 V), LC droplets in polymer matrix exhibited bipolar pattern, though on closing the circuit with the increase of electric field pattern of droplets starts changing, LC molecules align along the direction of applied electric field and aligned completely relatively at higher field (30 V), which illustrate vertical radial pattern. Further, results show that the DPDLC film containing 0.0625% dye concentration with consistent average droplet size ~4.30 μm, exhibits the best transmission at lower operating voltage.     

Effect of seasonal variation on dust samples of a winter fog affected urban environment of India,South East Asia

Physical and chemical characteristics of leaf dust (LD) samples, collected between 2011 and 2013, of a severely winter fog affected and polluted urban environment (Allahabad, India) of Indo-Gangetic plain are presented in this study. The weather changes in the study area are grouped into three effective annual seasonal periods – winter fog, pre-monsoon and post-monsoon. The pronounced impact of seasonal variations is observed in LD characteristics, as ~46% of the winter fog period samples ranges in size between 2.5 and 20 µm with high magnetic susceptibility (up to 938.22 × 10^?8 m³ kg^?1). In comparison, 35% of the LD from pre-monsoon period occurs in the size range of 100–300 µm with low magnetic susceptibility (up to 43.29 × 10^?8 m³ kg^?1). The fractal analysis involving submicroscopic clast dimension of LD also reveals a seasonal influence. The toxic metals (Pb, Zn, Cd, Cr and Ni) in LD belonging to winter fog and post-monsoon periods increase in comparison to samples from pre-monsoon time. Multivariate statistical analysis of trace element data suggests that the LD collected from winter fog and post-monsoon periods originate predominantly from anthropogenic source, whereas those collected during pre-monsoon owe their origin to crustal and anthropogenic sources, mainly. The present study has demonstrated the role of seasonal variation in controlling the physical and chemical properties of particulate matter based on multiple parameter analyses, and the derivation of the dust load from a mixed source (upper continental crust, anthropogenic and vehicular) for the study area for the first time.