A concise synthesis of (S)-N-ethoxycarbonyl-alpha-methylvaline

A practical and efficient protocol for the three-step synthesis of (S)-N-ethoxycarbonyl-alpha-methylvaline 3 is described which utilizes readily available commercial starting materials. The key transformations involve resolution-crystallization of tartrate salt 6 followed by a one-pot procedure for the preparation of 3 which is isolated as the dicyclohexylamine salt in 45% overall yield and in 91-95% ee.     

Addition of metallo enolates to chiral 1-acylpyridinium salts: total synthesis of (+)-cannabisativine

[formula: see text] A novel route to the first asymmetric synthesis of (+)-cannabisativine (1) is described. The total synthesis of 1 was accomplished with a high degree of regio- and stereoselectivity in 19 steps and 9% overall yield.     

Asymmetric synthesis of 1,2,3-trisubstituted cyclopentanes and cyclohexanes as key components of substance p antagonists

An efficient asymmetric synthesis of 1,2,3-trisubstituted cyclopentanes and cyclohexanes is described. Three methods were developed for the preparation of the 2,3-disubstituted cyclopentenones and cyclohexenones, which are key achiral building blocks. These intermediates are reduced catalytically with (R)-2-methyloxazaborolidine in high yield (82-98%) and excellent ee (89-96%). Directed reduction of the chiral allylic alcohols using Red-Al gives exclusively the 1,2-anti stereochemistry (>99:1). Epimerization of the ester center followed by saponification/crystallization affords the desired hydroxyacids in good yield (65-70%) and in high enantiomeric excess (>99%).     

Characterization of partially sintered ceramic powder compacts using fluorinated gas NMR imaging.

We use nuclear magnetic resonance (NMR) imaging of C2F6 gas to characterize porosity, mean pore size, and permeability of partially sintered ceramic (Y-TZP Yttria-stabilized tetragonal-zirconia polycrystal) samples. Conventional measurements of these parameters gave porosity values from 0.18 to 0.4, mean pore sizes from 10 nm to 40 nm, and permeability from 4 nm(2) to 25 nm(2). The NMR methods are based on relaxation time measurements (T(1)) and the time dependent diffusion coefficient D(Delta). The relaxation time of C2F6 gas is longer in pores than in bulk gas and it increases as the pore sizes decrease. NMR yielded accurate porosity values after correcting for surface adsorption effects. A model for T(1) dependence on pore size that accounts for collisions between gas molecules and walls as well as surface adsorption effects is proposed. The model fits the experimental data well. Finally, the long time limit of D(Delta)/D(o), where D(o) is the bulk gas diffusion coefficient is useful for measuring tortuosity, while the short time limit was not achieved experimentally and could not be used for calculating surface-area to volume (S/V) ratios.     

γ‐Irradiation of ultrahigh‐molecular‐weight polyethylene: Electron paramagnetic resonance and nuclear magnetic resonance spectroscopy and imaging studies of the mechanism of subsurface oxidation

The shelf aging of irradiated ultrahigh‐molecular‐weight polyethylene (UHMWPE) causes subsurface oxidation, which leads to failure in UHMWPE orthopedic components, yet the mechanisms causing subsurface oxidation remain unclear. The shelf aging of γ‐irradiated UHMWPE bars has been studied with electron paramagnetic resonance (EPR) and nuclear magnetic resonance (NMR) imaging and with microtoming and Fourier transform infrared microscopy. The bars initially contained only allyl radicals, and upon air exposure, a surface layer of peroxyl radicals formed through the reaction of allyl radicals with oxygen. Importantly, a band of low radical intensity just beneath the peroxyl layer became apparent. NMR imaging showed a zone of altered proton relaxation in this zone. With increasing time, surface peroxyl radicals persisted in comparison with the interior allyl radicals, although oxygen did not appear to penetrate any more deeply into the bar. The area of maximal oxidation and mechanical disruption, measured after 3 years, was at the interface between the zone of exterior peroxyl radicals and the zone of low radical intensity. We present a mechanism involving the intermediacy of sterically strained reactive dialkyl peroxides at this interface to explain subsurface oxidation. We also demonstrate that EPR and NMR imaging provides information that could potentially be used to identify subsurface oxidized UHMWPE components before failure. © 2004 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 42: 5929–5941, 2004     

Demonstrating the synergy of synthetic, mechanistic, and computational studies in a regioselective aniline synthesis

Tri- and tetrasubstituted anilines are formed in good to excellent yields by the addition of ketones to vinamidinium salts (up to 98%). The reaction proceeds via the formation of dienone intermediates, which react to form an enamine with the liberated amine. In the case of a nitro, or dimethylaminomethylene substituent, the enamines undergo a facile electrocyclic ring closure to form a cyclohexadiene, which goes on to form anilines with a high degree of selectivity (up to 50:1) with a minor competing pathway proceeding via the enol providing phenols. Competition experiments using isotopic substitution reveal that the rate determining step en route to dienone is enol/enolate addition to the vinamidinium salt, which is characterized by an inverse secondary isotope effect (k(H/D) 0.7-0.9). Computational studies have been used to provide a framework for understanding the reaction pathway. The original proposal for a [1,5]-H shift was ruled out on the basis of the calculations, which did not locate a thermally accessible transition state. The minimum energy conformation of the enamine is such that a facile electrocyclic ring closure is ensured, which is corroborated by the experimental studies. A framework for understanding the reaction pathway is presented.     

Rapid and efficient synthesis of 1H-indol-2-yl-1H-quinolin-2-ones

[reaction: see text] A concise and efficient synthesis of the novel indol-2-yl-1H-quinolin-2-one ring system found in the potent and selective KDR kinase inhibitors 1-3 is presented.     

Imaging inert fluorinated gases in cracks: perhaps in David's ankles

Inspired by the challenge of determining the nature of cracks on the ankles of Michelangelo's statue David, we discovered that one can image SF(6) gas in cracks in marble samples with alacrity. The imaging method produces images of gas with a signal-to-noise ratio (SNR) of 100-250, which is very high for magnetic resonance imaging (MRI) in general, let alone for an image of a gas at thermal equilibrium polarization. To put this unusual SNR in better perspective, we imaged SF(6) in a crack in a marble sample and imaged the lung tissue of a live rat (a more familiar variety of sample to many MRI scientists) using the same pulse sequence, the same size coils and the same MRI system. In both cases, we try to image subvoxel thin sheets of material that should appear bright against a darker background. By choosing imaging parameters appropriate for the different relaxation properties of SF(6) gas versus lung tissue and by choosing voxel sizes appropriate for the different goals of detecting subvoxel cracks on marble versus resolving subvoxel thin sheets of tissue, the SNR for voxels full of material was 220 and 14 for marble and lung, respectively. A major factor is that we chose large voxels to optimize SNR for detecting small cracks and we chose small voxels for resolving lung features at the expense of SNR. Imaging physics will cooperate to provide detection of small cracks on marble, but David's size poses a challenge for magnet designers. For the modest goal of imaging cracks in the left ankle, we desire a magnet with an approximately 32-cm gap and a flux density of approximately 0.36 T that weighs <500 kg.     

Measuring nanopore size from the spin-lattice relaxation of CF4 gas

The NMR 19F spin-lattice relaxation time constant T1 for CF4 gas is dominated by spin-rotation interaction, which is mediated by the molecular collision frequency. When confined to pores of approximately the same size or smaller than the bulk gas mean free path, additional collisions of molecules with the pore walls should substantially change T1. To develop a method for measuring the surface/volume ratio S/V by measuring how T1 changes with confinement, we prepared samples of known S/V from fumed silica of known mass-specific surface area and compressed to varying degrees into cylinders of known volume. We then measured T1 for CF4 in these samples at varying pressures, and developed mathematical models for the change in T1 to fit the data. Even though CF4 has a critical temperature below room temperature, we found that its density in pores was greater than that of the bulk gas and that it was necessary to take this absorption into account. We modeled adsorption in two ways, by assuming that the gas condenses on the pore walls, and by assuming that gas in a region near the wall is denser than the bulk gas because of a simplified attractive potential. Both models suggested the same two-parameter formula, to which we added a third parameter to successfully fit the data and thus achieved a rapid, precise way to measure S/V from the increase in T1 due to confinement in pores.     

A practical method for preparation of 4-hydroxyquinolinone esters

4-Hydroxyquinolinone esters are a common motif for many medicinal agents. Several methods exist for preparation of these compounds, generally involving the use of sodium hydride, which raises significant safety issues and limits their application to large-scale synthesis. In this note a practical, safe, and general method that employs a combination of diisopropylethylamine and sodium tert-butoxide is described. This allows for the synthesis of 4-hydroxyquinolinone esters and amides in good yields.