Comparison of a radiation counting method and ICP-MS for the determination of99Tc in environmental samples

Results of⁹⁹Tc measurements between radiation and non-radiation counting methods were compared using four radiation sources for which⁹⁹Tc has been previously determined with a gas-flow proportional counter or a GM counter. Each⁹⁹Tc source consisted of a stainless steel planchet bound by mylar films. Seaweeds collected from the Irish Sea were analyzed and⁹⁹Tc was electroplated on the planchet. The⁹⁹Tc in each sample was separated and measured again by inductively coupled plasma mass spectrometry (ICP-MS). Tc was continuously removed from each sample with 2M HNO₃ and 2M NaOH. After the solution containing Tc was adjusted to 0.1M HNO₃, Tc was extracted on a novel extraction chromatographic resin to separate it from Ru. The total recoveries for Tc on the planchet samples were almost the same with an average of 91%. The results of⁹⁹Tc measurements by both radiation and non-radiation counting methods agreed well with each other.     

HPLC separation of hydrogenated derivatives of buckminsterfullerene

Summary The effect of composition and flow rate of the mobile phase on the HPLC separation of hydrogenated buckminsterfullerene (C₆₀H_n n=2–38) was investigated on BuckySep column. Toluene was used as the basic solvent and hexane, heptane, cyclohexane, THF, acetonitrile, acetone, ethanol and 2-propanol as co-solvents. The fraction of co-solvents was varied 10–80%, and the flow rate 1–0.1 mL min⁻¹. Toluene-acetonitrile 65∶35 and toluene-acetone 50∶50 provided the best separation. Under the best conditions complete separation of C₆₀H₂ and almost complete separation of the four most abundant isomers of C₆₀H₄ were achieved. Separation of derivatives with higher hydrogen content was very poor. Presented at: Balaton Symposium on High-Performance Separation Methods, Siófok, Hungary, September 3–5, 1997     

Insertion reactions of [M(SR)3(PMe2Ph)2] with CS2 (M = Ru, Os; R = C6F4H-4, C6F5). X-ray structures of [Ru(S2CSC6F4H-4)2(PMe2Ph)2], trans-thiolates [M(SR)2(S2CSR)(PMe2Ph)2] (M = Ru; R = C6F5 and M = Os; R = C6F4H-4), and trans-thiolate-phosphine [Os(SC6F5)2(S2CSC6F5)(PMe2Ph)2

Reactions of [M(SR)(3)(PMe(2)Ph)(2)] (M = Ru, Os; R = C(6)F(4)H-4, C(6)F(5)) with CS(2) in acetone afford [Ru(S(2)CSR)(2)(PMe(2)Ph)(2)] (R = C(6)F(4)H-4, 1; C(6)F(5), 3) and trans-thiolates [Ru(SR)(2)(S(2)CSR)(PMe(2)Ph)(2)] (R = C(6)F(4)H-4, 2; C(6)F(5), 4) or the isomers trans-thiolates [Os(SR)(2)(S(2)CSR)(PMe(2)Ph)(2)] (R = C(6)F(4)H-4, 5; C(6)F(5), 7) and trans-thiolate-phosphine [Os(SR)(2)(S(2)CSR)(PMe(2)Ph)(2)] (R = C(6)F(4)H-4, 6; C(6)F(5), 8) through processes involving CS(2) insertion into M-SR bonds. The ruthenium(III) complexes [Ru(SR)(3)(PMe(2)Ph)(2)] react with CS(2) to give the diamagnetic thiolate-thioxanthato ruthenium(II) and the paramagnetic ruthenium(III) complexes while osmium(III) complexes [Os(SR)(3)(PMe(2)Ph)(2)] react to give the paramagnetic thiolate-thioxanthato osmium(III) isomers. The single-crystal X-ray diffraction studies of 1, 4, 5, and 8 show distorted octahedral structures. (31)P [(1)H] and (19)F NMR studies show that the solution structures of 1 and 3 are consistent with the solid-state structure of 1.     

Photochemical syn-anti isomerization reactions in N2-hydroxyisocytosines--an experimental matrix isolation and theoretical study

N2-hydroxyisocytosine and 1-methyl-N2-hydroxyisocytosine were studied using a matrix isolation technique combined with infrared absorption spectroscopy. For N2-hydroxyisocytosine isolated in an Ar matrix (at 10 K), two imino-oxo isomers, one with the hydroxyimino =N-OH group directed toward the N1-H group (the form called further anti) and the second with the =N-OH group directed toward N3-H (syn), were observed in the ratio 1.4:1. The syn isomer is converted totally to the anti form after UV (lambda > 295 nm) irradiation of the matrix. A small amount of the N(3)H-hydroxy-amino tautomer of N2-hydroxyisocytosine was also detected in the matrix. This form did not react photochemically. For 1-methyl-N2-hydroxyisocytosine, only the syn form of the imino-oxo tautomer was observed after deposition of the matrix. UV (lambda > 295 nm) irradiation induced a photoreaction converting this isomer into the anti form. After 15% of the starting material had been converted into the product, a photostationary state was achieved, and no further progress of the reaction was observed. Subsequent UV irradiation (lambda > 335 nm) caused a back reaction, leading to a disappearance of the anti form and to the recovery of the initial syn isomer. All isomers were identified by comparing their experimental IR spectra with the spectra theoretically calculated at the DFT(B3LYP)/6-31G(d,p) level, where DFT is the density functional theory. Good agreement between the observed and predicted patterns of the spectral lines allowed for reliable identification. The experimental IR spectra were interpreted and discussed. The relative energies of the 12 isomers of N2-hydroxyisocytosine were calculated at the MP2/6-31G(d,p) and MP4//MP2/6-31G(d,p) levels. For six isomers of 1-methyl-N2-hydroxyisocytosine, the calculations were carried out at the MP2/6-31G(d,p) level. The anti form of the imino-oxo tautomer of N-hydroxyisocytosine and the syn form of the imino-oxo tautomer of 1-methyl-N2-hydroxyisocytosine were predicted to be the most stable.     

Diverse evolution of [[Ph(2)P(CH(2))(n)PPh(2)]Pt(mu-S)(2)Pt[Ph(2)P(CH(2))(n)PPh(2)]] (n = 2, 3) metalloligands in CH(2)Cl(2)

The nucleophilicity of the [Pt(2)S(2)] core in [[Ph(2)P(CH(2))(n)PPh(2)]Pt(mu-S)(2)Pt[Ph(2)P(CH(2))(n)PPh(2)]] (n = 3, dppp (1); n = 2, dppe (2)) metalloligands toward the CH(2)Cl(2) solvent has been thoroughly studied. Complex 1, which has been obtained and characterized by X-ray diffraction, is structurally related to 2 and consists of dinuclear molecules with a hinged [Pt(2)S(2)] central ring. The reaction of 1 and 2 with CH(2)Cl(2) has been followed by means of (31)P, (1)H, and (13)C NMR, electrospray ionization mass spectrometry, and X-ray data. Although both reactions proceed at different rates, the first steps are common and lead to a mixture of the corresponding mononuclear complexes [Pt[Ph(2)P(CH(2))(n)PPh(2)](S(2)CH(2))], n = 3 (7), 2 (8), and [Pt[Ph(2)P(CH(2))(n)PPh(2)]Cl(2)], n = 3 (9), 2 (10). Theoretical calculations give support to the proposed pathway for the disintegration process of the [Pt(2)S(2)] ring. Only in the case of 1, the reaction proceeds further yielding [Pt(2)(dppp)(2)[mu-(SCH(2)SCH(2)S)-S,S']]Cl(2) (11). To confirm the sequence of the reactions leading from 1 and 2 to the final products 9 and 11 or 8 and 10, respectively, complexes 7, 8, and 11 have been synthesized and structurally characterized. Additional experiments have allowed elucidation of the reaction mechanism involved from 7 to 11, and thus, the origin of the CH(2) groups that participate in the expansion of the (SCH(2)S)(2-) ligand in 7 to afford the bridging (SCH(2)SCH(2)S)(2-) ligand in 11 has been established. The X-ray structure of 11 is totally unprecedented and consists of a hinged [(dppp)Pt(mu-S)(2)Pt(dppp)] core capped by a CH(2)SCH(2) fragment.     

Copper-catalyzed enantioselective conjugate addition of grignard reagents to acyclic enones

A highly enantioselective Cu-catalyzed addition of Grignard reagents to acyclic aliphatic enones is described. In the presence of 5 mol % of CuBr.SMe2 and 6 mol % of JosiPhos diphosphine aliphatic enones react with Grignard reagents to provide beta-substituted linear ketones with high yields, regio-, and enantioselectivities.     

Isolation of the novel dirhodium(II/II) thiolate compound Rh(2)(eta(1)-C(6)H(5)S)(2)(mu-C(6)H(5)S)(2)(bpy)(2)

The reaction of the anticancer active compound [Rh(2)(mu-O(2)CCH(3))(2)(bpy)(2)(CH(3)CN)(2)][BF(4)](2) (1) (bpy = 2,2'-bipyridine) with NaC(6)H(5)S under anaerobic conditions yields Rh(2)(eta(1)-C(6)H(5)S)(2)(mu-C(6)H(5)S)(2)(bpy)(2).CH(3)OH (2), which was characterized by UV-visible, IR, and (1)H NMR spectroscopies as well as single-crystal X-ray crystallography. Compound 2 crystallizes as dark red platelets in the monoclinic space group C2/c with cell parameters a = 20.398(4) A, b = 11.861(2) A, c = 17.417(4) A, beta = 108.98 degrees, V = 3984.9(14) A(3), Z = 4. The main structural features are the presence of a [Rh(2)](4+) core with a Rh-Rh distance of 2.549(2) A bridged by two benzene thiolate ligands in a butterfly-type arrangement. The axial positions of the [Rh(2)](4+) core are occupied by two terminal benzene thiolates. Cyclic voltammetric studies of 2 reveal that the compound exhibits an irreversible oxidation at +0.046 V in CH(3)CN, which is in accord with the fact that the compound readily oxidizes in the presence of O(2). The fact that this unusual dirhodium(II/II) thiolate compound is formed under these conditions is an important first step in understanding the metabolism of dirhodium anticancer active compounds with thiol-containing peptides and proteins.     

Poly(2-hydroxyethyl acrylate) hydrogel confined in a hydrophobous porous matrix

A series of interpenetrated polymer networks (IPNs) in which the first component is a porous poly(ethyl methacrylate) (PEMA) hydrophobic network and the second one is a poly(2-hydroxyethyl acrylate) (PHEA) hydrophilic network were synthesized. Equilibrium sorption isotherms can be reduced to a single master curve for all the IPNs when the water absorbed is expressed per gram of PHEA in them. The equilibrium water sorption in immersion is always much smaller than that of pure PHEA. This feature is due to the confining effect of the stiff PEMA matrix. The plasticizing effect of the absorbed water on the PHEA phase was characterized using thermally stimulated depolarization currents, dynamic-mechanical analysis and dielectric relaxation spectroscopy. The results show that the shift of the main relaxation peak towards lower temperatures is unaffected by the presence of the PEMA matrix, and only depends on the water content per gram of PHEA in the IPN.     

Particle and surface characterization of a natural illite and study of its copper retention

Illite clays are known to have a strong affinity for metallic pollutants in the environment and can be applied as low-cost adsorbents for industrial waste treatment. A crucial factor in the development of such applications, however, is the understanding of the chemical, mineralogical, and colloidal properties of these clays. It is also important to understand the mechanisms involved in the surface adsorption of metals by these adsorbants. In order to study the retention of transition metals on illite clays, we have applied surface characterization techniques such as FPIA, SEM-EDX, XRD, N2 (77 K) adsorption, and FTIR. In addition to these experimental techniques, we have also employed a theoretical model that accounts for the chemistry of transition metal ions, and considers the global retention process to be the sum of several single retention processes. This model adequately fits the experimental data and allows for the speciation of metal retention on illite surfaces. Between pH values of 2.53 and 3.01 the only adsorption processes are the electrostatic sorption of [Cu(H2O)6]2+, and the surface complexation of [Cu(H2O)6]2+ and [Cu(OH)(H2O)5]+ ions. Surface complexation of [Cu(OH)(H2O)5]+ ions increases with pH, overcoming [Cu(H2O)6]2+ retention, and thus contributing to the surface precipitation of Cu(OH)2.     

On fixed points of holomorphic automorphisms

Summary Banach M-lattices are studied from the view point whether all the biholomorphic automorphisms of their unit balls admit fixed points when continuously extended to the closure of the unit ball. A characterization of compact topologieal F-spaces is found in terms of the fixed points of the elements of AutB(C()) which enables to establish some particular properties also of the topological automorphisms of compact F-spaces. Finally it is shown that if the M- lattice E admits a predual then each member of Aut B(E) has fixed point if and only if E is isometrically isomorphic with some l-space.