Identification of a novel series of alkylitaconic acids in wood cultures of Ceriporiopsis subvermispora by gas chromatography/mass spectrometry.

A novel series of long-chain unsaturated dicarboxylic acids consisting of a long aliphatic chain attached to the C-3 position of itaconic acid has been identified by gas chromatography/mass spectrometry during in vitro decay of eucalypt wood by the white-rot basidiomycete Ceriporiopsis subvermispora. The major compounds were identified as tetradecyl-, 7-hexadecenyl- and hexadecylitaconic acids by their mass fragmentation patterns. Other members of the same compound series, identified as dodecanyl-, tridecanyl-, tetradecenyl-, pentadecanyl-, octadecenyl- and octadecanylitaconic acids, were present in very minor amounts or traces. Whereas hexadecenylitaconic acid has already been reported in cultures of C. subvermispora, to our knowledge this is the first report of the presence of the other alkylitaconic acids in fungal cultures. These new alkylitaconic-type metabolites may constitute a source for peroxidizable lipids involved in lignin degradation during wood decay by C. subvermispora and other white-rot basidiomycetes.     

Investigation of β-cyclodextrin complex formation with 2,2′-dipyridine in ground and excited triplet states

An exfoliation/restacking synthesis route has been developed for the fabrication of Ni–Al layered double hydroxide (LDH) intercalated Cu(II) tetrasulfophthalocyanine (CuPcs) hybrid by using exfoliated LDH nanosheets and guest molecules as building blocks. The structural and morphological features of the resulting hybrid have been investigated by varieties of analytical techniques such as XRD, SEM, UV–Vis and thermal analysis. Interlayer spacings determined from XRD patterns reveal a perpendicular orientation of the CuPcs macrocycles to the Ni–Al LDH layer. Then the obtained nanohybrid was utilized as photocatalyst for the decolorization of Rhodamine 6G (Rh6G) aqueous solutions. The effects of H₂O₂, time, substrate concentration, catalyst dose, were studied as a function of percentage of decolorization under irradiation and the corresponding dark controls were also carried out for comparison. The decolorization percentage of Rh6G increases with irradiation time and can reach to 70% at 6 h as against to 18% in dark control.     

Soft repulsive mixtures under gravity: brazil-nut effect, depletion bubbles, boundary layering, nonequilibrium shaking

A binary mixture of particles interacting via long-ranged repulsive forces is studied in gravity by computer simulation and theory. The more repulsive A-particles create a depletion zone of less repulsive B-particles around them reminiscent to a bubble. Applying Archimedes' principle effectively to this bubble, an A-particle can be lifted in a fluid background of B-particles. This "depletion bubble" mechanism explains and predicts a brazil-nut effect where the heavier A-particles float on top of the lighter B-particles. It also implies an effective attraction of an A-particle towards a hard container bottom wall which leads to boundary layering of A-particles. Additionally, we have studied a periodic inversion of gravity causing perpetuous mutual penetration of the mixture in a slit geometry. In this nonequilibrium case of time-dependent gravity, the boundary layering persists. Our results are based on computer simulations and density functional theory of a two-dimensional binary mixture of colloidal repulsive dipoles. The predicted effects also occur for other long-ranged repulsive interactions and in three spatial dimensions. They are therefore verifiable in settling experiments on dipolar or charged colloidal mixtures as well as in charged granulates and dusty plasmas.     

Automation of a Fourier transform ion cyclotron resonance mass spectrometer for acquisition, analysis, and e-mailing of high-resolution exact-mass electrospray ionization mass spectral data

A system has been designed to automatically acquire high-resolution (>50,000 FWHM), exact-mass (mass measurement error ≤3 mmu) electrospray ionization mass spectra with a commercial Fourier transform ion cyclotron resonance mass spectrometer equipped with a high-field (9.4 tesla) superconducting magnet and a commercial autosampler. Upon the injection of each individual sample, the autosampler transmits a contact closure signal to the previously tuned and calibrated mass spectrometer to initiate data acquisition. A software package was designed to run off-line and to accept a sample list with input information for each of the samples. Then for each of the samples, the software automatically processes the acquired data, interprets the exact-mass data by correlating the observed masses with predicted masses computed from proposed elemental formulas, and then finally prints the spectra, peak lists, and exact-mass reports, and e-mails the exact-mass reports to the submitting chemists. With this automation package, large numbers of samples can be run unattended while obtaining exact masses for all the abundant ions in the spectra. Sample turnaround times are reduced with a corresponding increase in sample throughput. The performance of the system was evaluated with nearly 700 samples with a precalibrated instrument, without the presence of an internal standard. The system was found to be reliable and robust with a fitted standard deviation of 0.32 mmu and a small average systematic mass error of ?0.28 mmu. Typical data acquired with the system have resolving powers >50,000 (FWHM) and mass errors <1.0 mmu.     

A top-down method for the determination of residue-specific solvent accessibility in proteins

We present a method employing top-down Fourier transform mass spectrometry (FTMS) for the rapid profiling of amino acid side-chain reactivity. The reactivity of side-chain groups can be used to infer residue-specific solvent accessibility and can also be used in the same way as H/D exchange reactions to probe protein structure and interactions. We probed the reactivity of the N-terminal and epsilon-lysine amino groups of ubiquitin by reaction with N-hydroxysuccinimidyl acetate (NHSAc), which specifically acetylates primary amines. Using a hybrid Q-FTMS instrument, we observed several series of multiply acetylated ubiquitin ions that varied with the NHSAc:protein stoichiometry. We isolated and fragmented each member of the series of acetylated ubiquitin ions in the front end of the instrument and measured the fragment ion masses in the FTMS analyzer cell to determine which residue positions were modified. As we increased the NHSAc:protein stoichiometric ratio, identification of the fragments from native protein and protein with successively increasing modification allowed the assignment of the complete order of reactivity of the primary amino groups in ubiquitin (Met 1 approximately Lys 6 approximately Lys 48 approximately Lys 63>Lys 33>Lys 11>Lys 27, Lys 29). These results are in excellent agreement with the reactivity expected from other studies and predicted from the known crystal structure of ubiquitin. The top-down approach eliminates the need for proteolytic digestion, high-performance liquid chromatographic separations and all other chemical steps except the labeling reaction, making it rapid and amenable to automation using small quantities of protein.     

The significance of monoisotopic and carbon-13 isobars for the identification of a 19-component dodecapeptide library by positive ion electrospray Fourier transform ion cyclotron resonance mass spectrometry

Harnessing the ultra high resolution capabilities of Fourier transform ion cyclotron resonance mass spectrometry (FTICR-MS) and positive ion electrospray, we have demonstrated the significance and utility of cumulative mass defect high resolution mass separation stable isotope distribution, exact mass measurement and elemental formula as a means of simultaneously identifying 19 components of the dodecapeptide library Ac-ANKISYQS[X]STE-NH(2). With an instrument resolution of 275 000 (average), isobaric multiplets attributed to monoisotopic and carbon-13 components of peptides: Ac approximately SLS approximately NH(2); Ac approximately SNS approximately NH(2); Ac approximately SOS approximately NH(2); Ac approximately SDS approximately NH(2); within the mass window of 1380-1385 Da, and Ac approximately SQS approximately NH(2); Ac approximately SKS approximately NH(2); Ac approximately SES approximately NH(2); Ac approximately SMS approximately NH(2), within the mass window 1395-1400 Da, were mass resolved, accurately mass measured and identified from the computed molecular formulas. This experimental procedure enabled the separation of monoisotopic and carbon-13 isobars yielding enhanced selectivity and specificity and serves to illustrate the significance of monoisotopic and carbon-13 isobars in final product analysis. Chromatographic separation (HPLC) was of limited utility except for monitoring the overall extent of reaction and apparent product distribution. Positive ion electrospray-FTICR-MS and fast atom bombardment (FAB) MS were used to assess final product quality and apparent component distribution.     

Characterization of DESI-FTICR mass spectrometry - from ECD to accurate mass tissue analysis

Implementation of desorption electrospray ionization (DESI) technique on a 9.4 T Fourier transform ion cyclotron resonance (FTICR) mass spectrometer is described. Desorption electrospray technique is capable of the direct investigation of natural samples without any need for sample preparation or chromatographic separation. Since the DESI mass spectra of natural samples are very complex owing to the lack of preseparation or cleanup, the ideal mass spectrometric analyzer for these applications is a high-resolution instrument such as FTICR mass spectrometer. DESI was implemented by constructing an electronically controlled source framework comprising six linear moving stages and one rotating stage. A three-dimensional linear stage was used to accommodate samples, while another 3D linear stage equipped with rotating stage was used as a spray mount. A modified electrosonic sprayer was used as a primary electrospray device. DESI-FTICR setup was characterized with regard to geometrical, electrical and flow conditions using deposited peptide samples in range of 1-100 pmol gross deposited amount on glass and polymer surfaces. Optimized conditions enabled the routine acquisition of DESI-MS spectra on the instrument at 130 000 resolution in the broadband mode and with comparable sensitivity to data reported in the literature. Since the main significance of DESI-FTICR MS is the combination of intact tissue analysis, the capabilities of the technique were demonstrated by analyzing murine liver samples. Presence of lysophospholipids in the liver tissue was tentatively associated with the lipid metabolism taking place in liver. DESI-FTICR is also a promising technique in the field of peptide analysis due to capability of top-down sequencing using electron capture dissociation. As a proof-of-principle experiment, a small synthetic polypeptide containing 36 amino acids was ionized using DESI and was sequenced in the FTICR by means of ECD (electron capture dissociation) fragmentation. Spectra gave almost full sequence information in agreement with the known amino acid sequence of the species.     

Buchbesprechungen

Ohne Zusammenfassung