Surfaces of fluorinated pyridinium block copolymers with enhanced antibacterial activity

Polystyrene-b-poly(4-vinylpyridine) copolymers were quaternized with 1-bromohexane and 6-perfluorooctyl-1-bromohexane. Surfaces prepared from these polymers were characterized by contact angle measurements, near-edge X-ray absorption fine structure spectroscopy and X-ray photoelectron spectroscopy. The fluorinated pyridinium surfaces showed enhanced antibacterial activity compared to their nonfluorinated counterparts. Even a polymer with a relatively low molecular weight pyridinium block showed high antimicrobial activity. The bactericidal effect was found to be related to the molecular composition and organization in the top 2-3 nm of the surface and increased with increasing hydrophilicity and pyridinium concentration of the surface.     

Decarboxylative trifluoromethylation of aryl halides using well-defined copper-trifluoroacetate and -chlorodifluoroacetate precursors

New synthetic routes to (NHC)copper-trifluoroacetate and -chlorodifluoroacetate complexes were developed (NHC = N-heterocyclic carbenes) so baseline reactivity patterns could be established for the decarboxylative trifluoromethylation of organic halides. In the presence of aryl halides, loss of CO₂ from these new precursors occurred at 160 °C concurrent with the formation of aryl-CF₃.     

Chirality and Polarity in the f‐Block Borates M4[B16O26(OH)4(H2O)3Cl4] (M=Sm,Eu, Gd,Pu, Am,Cm, and Cf)

The reactions of trivalent lanthanides and actinides with molten boric acid in high chloride concentrations result in the formation of M₄[B₁₆O₂₆(OH)₄(H₂O)₃Cl₄] (M=Sm, Eu, Gd, Pu, Am, Cm, Cf). This cubic structure type is remarkably complex and displays both chirality and polarity. The polymeric borate network forms helical features that are linked via two different types of nine‐coordinate f‐element environments. The f–f transitions are unusually intense and result in dark coloration of these compounds with actinides.     

In‐house and synchrotron X‐ray diffraction studies of 2‐phenyl‐1,10‐phenanthroline,protonated salts,complexes with gold(III) and copper(II), and an orthometallation product with palladium(II)

Different salts of the 2‐phenyl‐1,10‐phenanthrolin‐1‐ium cation, (pnpH)⁺, are obtained by reacting 2‐phenyl‐1,10‐phenanthroline (pnp), C₁₈H₁₂N₂, (I), with a variety of anions, such as hexafluoridophosphate, C₁₈H₁₃N₂⁺·PF₆⁻, (II), trifluoromethanesulfonate, C₁₈H₁₃N₂⁺·CF₃SO₃⁻, (III), tetrachloridoaurate, (C₁₈H₁₃N₂)[AuCl₄], (IV), and bromide (as the dihydrate), C₁₈H₁₃N₂⁺·Br⁻·2H₂O, (V). Compound (I) crystallizes with Z′ = 2, with both independent molecules adopting a coplanar conformation. In (II)–(IV), a hydrogen bond exists between the cation and anion, while one of the lattice water molecules serves as a hydrogen‐bonded bridge between the cation and anion in (V). Reaction of (I) with HAuCl₄ gives the salt complex (IV); however, reaction with KAuCl₄ produces the monodentate complex trichlorido(2‐phenyl‐1,10‐phenanthroline‐κN¹⁰)gold(III), [AuCl₃(C₁₈H₁₂N₂)], (VI). Dichlorido(2‐phenyl‐1,10‐phenanthroline‐κ²N,N′)copper(II), [CuCl₂(C₁₈H₁₂N₂)], (VII), results from the reaction of CuCl₂·2H₂O and (I), in which the Cu^II center adopts a tetrahedrally distorted square‐planar geometry. The pendent phenyl ring twists to a bisecting position relative to the phenanthroline plane. The square‐planar Pd^II complex, bromido[2‐(phenanthrolin‐2‐yl)phenyl‐κ³C¹,N,N′]palladium(II), [PdBr(C₁₈H₁₁N₂)], (VIII), is obtained from the reaction of (I) with [PdCl₂(cycloocta‐1,5‐diene)], followed by addition of bromine. A coplanar geometry for the pendent ring is adopted as a result of the tridentate bonding motif.     

Investigation of the Montmorillonite clay-catalyzed [1,3] shift reaction of 3-methyl-2-butenyl phenyl ether

The [1,3] shift reaction of 3-methyl-2-butenyl phenyl ether was catalyzed more effectively by Montmorillonite K10 clay than Montmorillonite KSF clay, and proceeded with greatest ortho-selectivity in carbon tetrachloride at room temperature.     

Perfluorocarbon thin films and polymer brushes on stainless steel 316 L for the control of interfacial properties

Perfluorocarbon thin films and polymer brushes were formed on stainless steel 316 L (SS316L) to control the surface properties of the metal oxide. Substrates modified with the films were characterized using diffuse reflectance infrared Fourier transform spectroscopy (DRIFT), contact angle analysis, atomic force microscopy (AFM), and cyclic voltammetry (CV). Perfluorooctadecanoic acid (PFOA) was used to form thin films by self-assembly on the surface of SS316L. Polypentafluorostyrene (PFS) polymer brushes were formed by surface-initiated polymerization using SAMs of 16-phosphonohexadecanoic acid (COOH-PA) as the base. PFOA and PFS were effective in significantly reducing the surface energy and thus the interfacial wetting properties of SS316L. The SS316L control exhibited a surface energy of 38 mN/m compared to PFOA and PFS modifications, which had surface energies of 22 and 24 mN/m, respectively. PFOA thin films were more effective in reducing the surface energy of the SS316L compared to PFS polymer brushes. This is attributed to the ordered PFOA film presenting aligned CF(3) terminal groups. However, PFS polymer brushes were more effective in providing corrosion protection. These low-energy surfaces could be used to provide a hydrophobic barrier that inhibits the corrosion of the SS316L metal oxide surface.     

Photoelectron spectroscopy of HC4N-

We report the 364-nm photoelectron spectrum of HC(4)N(-). We observe electron photodetachment from the bent X(2)A" state of HC(4)N(-) to both the near-linear X(3)A" and the bent ? (1)A' states of neutral HC(4)N. We observe an extended, unresolved vibrational progression corresponding to X(3)A" ← X(2)A" photodetachment, and we measure the electron affinity (EA) of the X(3)A" state of HC(4)N to be 2.05(8) eV. Photodetachment to the bent ? (1)A' state results in a single intense origin peak at a binding energy of 2.809(4) eV, from which we determine the singlet-triplet splitting (ΔE(ST)) of HC(4)N: 0.76(8) eV. For comparison and to aid in the interpretation of the HC(4)N(-) spectrum, we also report the 364-nm photoelectron spectra of HCCN(-) and DCCN(-). Improved signal-to-noise over the previous HCCN(-) and DCCN(-) photoelectron spectra allows for a more precise determination of the EAs and ΔE(ST)s of HCCN and DCCN. The EAs of HCCN and DCCN are measured to be 2.001(15) eV and 1.998(15) eV, respectively; ΔE(ST)(HCCN) is 0.510(15) eV and ΔE(ST)(DCCN) is 0.508(15) eV. These results are discussed in the context of other organic carbene chains.     

Oxidative modification of native protein residues using cerium(IV) ammonium nitrate

A new protein modification strategy has been developed that is based on an oxidative coupling reaction that targets electron-rich amino acids. This strategy relies on cerium(IV) ammonium nitrate (CAN) as an oxidation reagent and results in the coupling of tyrosine and tryptophan residues to phenylene diamine and anisidine derivatives. The methodology was first identified and characterized on peptides and small molecules, and was subsequently adapted for protein modification by determining appropriate buffer conditions. Using the optimized procedure, native and introduced solvent-accessible residues on proteins were selectively modified with polyethylene glycol (PEG) and small peptides. This unprecedented bioconjugation strategy targets these under-utilized amino acids with excellent chemoselectivity and affords good-to-high yields using low concentrations of the oxidant and coupling partners, short reaction times, and mild conditions.     

Investigation of the copper binding site and the role of histidine as a ligand in riboflavin binding protein

Riboflavin Binding Protein (RBP) binds copper in a 1:1 molar ratio, forming a distinct well-ordered type II site. The nature of this site has been examined using X-ray absorption and pulsed electron paramagnetic resonance (EPR) spectroscopies, revealing a four coordinate oxygen/nitrogen rich environment. On the basis of analysis of the Cambridge Structural Database, the average protein bound copper-ligand bond length of 1.96 A, obtained by extended x-ray absorption fine structure (EXAFS), is consistent with four coordinate Cu(I) and Cu(II) models that utilize mixed oxygen and nitrogen ligand distributions. These data suggest a Cu-O 3N coordination state for copper bound to RBP. While pulsed EPR studies including hyperfine sublevel correlation spectroscopy and electron nuclear double resonance show clear spectroscopic evidence for a histidine bound to the copper, inclusion of a histidine in the EXAFS simulation did not lead to any significant improvement in the fit.     

THE EFFECT OF DIFFERENTIATION ON PHOTOSENSITIZER UPTAKE BY HL60 CELLS

The capability of human promyelocytic leukemia cells HL60 to be induced to differentiate to various stages along the monocytic or myelocytic pathway was exploited for investigation of the uptake of selected photo-sensitizers by diverse types of cells of the same origin. The results showed that there was no substantial difference in photofrin uptake between noninduced HL60 cells, immature monocytes, immature neutrophils and cells differentiated along the eosinophilic pathway. In contrast, HL60 cells differentiated into macrophages (HL609) exhibited markedly increased photofrin uptake, which was further enhanced by their pretreatment with bacterial lipopolysaccharide. Similar results were obtained with other photosensitizers tested: di-and tetrasulfonated aluminum phthalocyanines (AIPcS₂ and AIPcS₄), tetrasulfonated zinc phthalocyanine (ZnPcS₄), tetraphenylporphine tetrasulfonate (TPPS₄) and benzoporphyrin derivative monoacid (BPD). Despite marked differences in the state of self-aggregation and other chemical properties of these compounds, the degree of their preferential uptake by HL60 PH cells showed very little variation. In a typical experiment, the uptake of these photosensitizers by HL60 PH cells was four to five times higher than the uptake by noninduced HL60 cells. In addition to the fluorometric assay employed in most of the experiments, cellular concentration of AlPcS₄ was determined by measurement of elementary aluminum using atomic absorption spectroscopy.