A molecular beam study of the NO + CO reaction on Pd(111) surfaces

Nitric oxide (NO) reduction with carbon monoxide (CO) on the Pd(111) surface was studied under isothermal conditions by molecular beam techniques as a function of temperature, NO:CO beam composition, and beam flux. Systematic experiments were performed under transient and steady state conditions. Displacement of adsorbed CO by NO in the transient state of the reaction was observed at temperatures between 375 and 475 K for all the NO:CO compositions studied. NO accumulation occurs on Pd(111) surface under steady state conditions, below 475 K, due to stronger chemisorption of NO. The steady state reaction rates attain a maximum at about 475 K, nearly independent of beam composition. N2 was found to be the major product of the reduction, along with a minor production of N2O. The production of N2 and N2O indicates molecular and dissociative adsorption of NO on Pd(111) at temperatures up to 525 K. Postreaction TPD measurements were performed in order to determine the nitrogen coverage under steady-state conditions. Finally, the results are discussed with respect to the rate-controlling character of the different elementary steps of the reaction system.     

Schiff bases of nickel(II), copper(II) porphyrins and dibenzo-18-crown-6 interspersed bis -metal porphyrins. Protonation studies

Schiff-base (SB) derivatives of Ni(II) and Cu(II) porphyrins endowed with various amine functions (R−NH₂),n-butylamine,p-anisidine andm-nitroaniline have been prepared from corresponding formyl porphyrins. Protonation studies of these SB derivatives reveal a marked red shift of the optical absorption bands in the visible region relative to the unprotonated imines. The magnitude of the observed red shifts in the protonated derivatives, (SBH⁺) are found to depend on the electron-withdrawing or electron-donating nature of the R group of the amines. The results of the optical absorption,¹H NMR, EPR, and cyclicovoltammetric studies are illustrative of the fact that protonation of the SB derivatives results in a localized positive charge, in the periphery of the porphyrin (p) system. The dibenzo-18-crown-6 interspersedbisporphyrin schiff bases have been prepared fromtrans 4,4′-diamino dibenzo-18-crown-6 and formyl porphyrins. The protonation of these SB derivatives is found to proceed in a concerted fashion. The cation complexation studies by the crown ether entity in thebisporphyrin systems have been investigated using optical absorption, magnetic resonance and electrochemical methods. The redox characteristics of the protonated dimeric SB porphyrins reveal that the first oxidation step involves a two-electron transfer reaction. This is important in view of their possible usage in multielectron transfer reactions of biological and catalytic interest.     

Theoretical studies on the mechanism of acid-promoted hydrolysis of N-formylaziridine in comparison with formamide

[reaction: see text] We present an ab initio study of the acid-promoted hydrolysis reaction mechanism of N-formylaziridine in comparison with formamide. Since the rate of amide hydrolysis reactions depends on the formation of the tetrahedral intermediate, we focused our attention mainly on the reactant complex, the tetrahedral intermediate, and the transition state connecting these two stationary points. Geometries were optimized using the density functional theory, and the energetics were refined using ab initio theory including electron correlation. Solvent effects were investigated by using polarizable continuum method calculations. The proton-transfer reaction between the O-protonated and N-protonated amides was investigated. In acidic media, despite that the N-protonated species is more stable than the O-protonated one, it is predicted that both N-protonated and O-protonated pathways compete in the hydrolysis reaction of N-formylaziridine.     

Orientational melting and reorientational motion in a cubane molecular crystal: a molecular simulation study

Detailed molecular simulations are carried out to investigate the effect of temperature on orientational order in cubane molecular crystal. We report a transition from an orientationally ordered to an orientationally disordered plastic crystalline phase in the temperature range 425-450 K. This is similar to the experimentally reported transition at 395 K. The nature of this transition is first order and is associated with a 4.8% increase in unit cell volume that is comparable to the experimentally reported unit cell volume change of 5.4% (Phys. Rev. Lett. 1997, 78, 4938). An orientational order parameter, eta(T), has been defined in terms of average angle of libration of a molecular 3-fold axis and the orientational melting has been characterized by using eta(T). The orientational melting is associated with an anomaly in specific heat at constant pressure (C(P)) and compressibility (kappa). The enthalpy of transition and entropy of transition associated with this orientational melting are 20.8 J mol(-1) and 0.046 J mol(-1) K(-1), respectively. The structure of crystalline as well as plastic crystalline phases is characterized by using various radial distribution functions and orientational distribution functions. The coefficient of thermal expansion of the plastic crystalline phase is more than twice that of the crystalline phase.     

Investigation of the use of B3LYP zero-point energies and geometries in the calculation of enthalpies of formation

The use of B3LYP/6–31G^* zero-point energies and geometries in the calculation of enthalpies of formation has been investigated for the enlarged G2 test set of 148 molecules [J. Chem. Phys. 106 (1997) 1063]. A scale factor of 0.96 for the B3LYP zero-point energies gives an average absolute deviation nearly the same as scaled HF/6–31G^* zero-point energies for G2, G2(MP2), and B3LYP/6–311 + G(3df,2p) enthalpies. A scale factor of 0.98, which has been recommended in some studies, increases the average absolute deviation by about 0.2 kcal/mol. Geometries from B3LYP/6–31G^* are found to do as well as MP2/6–31G^* geometries in the calculation of the enthalpies of formation.     

A gravimetric and an X-ray fluorescence method for the determination of rubidium in Rb2U(SO4)3

Chemical characterization of rubidium uranium(IV) trisulfate, Rb₂U(SO₄)₃, a new chemical assay standard for uranium requires accurate analysis of rubidium. A gravimetric and an X-ray fluorescence method (XRF) for the determination of rubidium in this compound are described. In the gravimetric method, rubidium is determined as Rb₂Na[Co(NO₂)₆].H₂O without separating uranium with a precision of the order of ±0.5%. In the XRF method, the concentration ratio of rubidium to uranium, C_Rb/C_U, is determined in the solid samples by the binary ratio method using calibration between intensity ratios (I_Rb/I_U) and concentration ratios (C_Rb/C_U). The concentration of rubidium is derived using the uranium value which is known with a precision better than ±0.05%. The XRF method has a precision better than ±0.8% for rubidium determination.     

The ground-state singlet potential surface for C2H4

Calculations with an extended polarized basis set and Møller-Plesset perturbation theory including triple substitution correlation corrections in the fourth-order treatment indicate that singlet ethylidene (CH₃CH:) is not a local minimum on the C₂H₄ potential energy surface. Rearrangement to ethylene occurs without actuation. Barriers for hydrogen scrambling and for 1,1-hydrogen elimination are estimated.     

Electron spin resonance study of copper(II) complexes with square pyramidal and compressed trigonal bipyramidal symmetries in different solvents at 295 K and 77 K

An electron spin resonance (ESR) study has been carried out on six copper(II) complexes. Two of these, Cu(den)(SCN)₂ and [Cu(den)(SCN)](ClO₄), have a square pyramidal CuN₄S coordination in the solid state while the remaining four complexes, Cu(pib)tu, Cu(bipy)tu, Cu(bipy) and Cu(bipyam), have compressed trigonal bipyramidal Cu(N₂S)N₂ Cu(N₂S)N₂, Cu(N₂Cl)N₂ and Cu(N₂I)N₂, respectively, type of coordination in the solid state. Excepting Cu(pib)tu, all complexes show characteristic isotropic fourline hyperfine structure in water, methanol, ethanol and dimethylformamide at 295 K. At 77 K, owing to the poor glass-forming ability of water, the spectral features are not properly resolved and are also not consistent with the lineshape requirements. Therefore, evaluation of spin Hamiltonian parameters is made from the frozen dimethylformamide spectra. Some interesting observations have been made. In highly viscous 2-methyl-benzoxazole, the spectral lineshape is considerably modified. Quantitative evaluation has been made of metal-ligand bonding and various contributions to linewidths.     

Ultracentrifugation Method to Measure Water-Soluble Monomer Incorporation in Latex

Emulsion copolymerizations involving water-soluble functional monomers such as N-methylolacrylamide often result in the formation of water-soluble polymer that remains in the aqueous phase of the latex. A simple procedure is developed to determine the amount of water-soluble polymer in the aqueous phase of a high-solids latex using ultracentrifugation. Dilution of the latex with water is usually found necessary for good separation during ultracentrifugation. If the latex contains a surface-active species (surfactant) in amounts comparable to the amount of water-soluble polymer, calculation of the amount of water-soluble polymer in the serum of the original latex will require information about dilution dependent partitioning of the surfactant between the surface of the particles and the aqueous phase. This paper outlines a procedure that enables determination of the amount of water-soluble polymer in the aqueous phase of the original latex, by ultracentrifugation of the latex diluted to different concentrations. The procedure also gives the Henrys constant for the adsorption of the surfactant on the surface of the polymer particles in the latex.     

Singlet quenching of tetraphenylporphyrin and its metal derivatives by iron(III) coordination compounds

The quenching of fluorescence of the free-base tetraphenylporphyrin, H₂TPP, and its metal derivatives, MgTPP and ZnTPP by diverse iron(III) complexes, [Fe(CN)₆]³⁻, Fe(acac)₃, [Fe(mnt)₂]⁻, Fe(Salen)Cl, [Fe₄S₄(SPh)₄]²⁻·, FeTPPCl and [Fe(Cp)₂]⁺ has been studied both in homogeneous medium (CH₃CN) and micellar media, SDS., CTAB and Triton X-100. The quenching efficiencies are analysed in terms of diffusional encounters and it has been possible to separate static quenching components. The quenching constants are dependent on the nature of the ligating atoms around iron(III) and also on the extent of π-conjugation of the ligands. The quenching mechanism has been investigated using steady-state irradiation experiments. Evidence for oxidative quenching by iron(III) complexes was obtained, though the spin multiplicities of the excited electronic states of iron(III) complexes permit both energy and electron transfer mechanisms for quenching of the singlet excited state of the porphyrins.