Analysis of polycyclic aromatic hydrocarbons extracted from air particulate matter using a temperature programmable injector coupled to GC–C–IRMS†

Compound specific isotopic analysis (CSIA) can provide information about the origin of analysed compounds – in this case, polycyclic aromatic hydrocarbons (PAHs). In the study, PAHs were extracted from three dust samples: winter and summer filter dust and tunnel dust. The measurement was performed using the method validated in our laboratory using pure, solid compounds and EPA 610 reference assortment.

CSIA required an appropriate clean-up method to avoid an unresolved complex in the gas chromatographic analysis usually found in the chromatography of PAHs. Extensive sample clean-up for this particular matrix was found to be necessary to obtain good gas chromatography–combustion–isotope ratio mass spectrometry analysis results. The sample purification method included two steps in which the sample is cleaned up and the aliphatic and aromatic hydrocarbons are separated.

The concentration of PAHs in the measured samples was low; so a large volume injection technique (100 μl) was applied. The δ_VPDB ¹³C was measured with a final uncertainty smaller than 1 ‰. Comparison of the δ_VPDB ¹³C signatures of PAHs extracted from different dust samples was feasible with this method and, doing so, significant differences were observed.     

High-density targeting of a viral multifunctional nanoplatform to a pathogenic, biofilm-forming bacterium

Nanomedicine directed at diagnosis and treatment of infections can benefit from innovations that have substantially increased the variety of available multifunctional nanoplatforms. Here, we targeted a spherical, icosahedral viral nanoplatform to a pathogenic, biofilm-forming bacterium, Staphylococcus aureus. Density of binding mediated through specific protein-ligand interactions exceeded the density expected for a planar, hexagonally close-packed array. A multifunctionalized viral protein cage was used to load imaging agents (fluorophore and MRI contrast agent) onto cells. The fluorescence-imaging capability allowed for direct observation of penetration of the nanoplatform into an S. aureus biofilm. These results demonstrate that multifunctional nanoplatforms based on protein cage architectures have significant potential as tools for both diagnosis and targeted treatment of recalcitrant bacterial infections.     

Synthesis of triazole analogues of the nanaomycin antibiotics using ‘click chemistry’

A series of triazole analogues of the nanaomycin family of antibiotics have been prepared using a ‘click’ dipolar cycloaddition of a naphthalene azide to various alkynes, followed by oxidation to the desired pyranonaphthoquinones.     

Micellar capillary electrophoresis – Electrochemical detection of neurochemicals from Drosophila

The fruit fly is one of the most heavily studied model organisms for genetics research and has significantly contributed to the molecular, cellular, and evolutionary understandings of human behavior. Recent research in the analytical chemistry of the fruit fly has focused on developing methods to obtain highly sensitive chemical quantification information of Drosophila melanogaster, especially looking at the nervous system. We provide a brief overview of work in the area of CE of the fly head and brain.     

Improving quantitative gas chromatography-electron ionization mass spectrometry results using a modified ion source: demonstration for a pharmaceutical application

Gas chromatography-mass spectrometry is a well established analytical technique. However, mass spectrometers with electron ionization sources may suffer from signal drifts, hereby negatively influencing quantitative performance. To demonstrate this phenomenon for a real application, a static headspace-gas chromatography method in combination with electron ionization-quadrupole mass spectrometry was optimized for the determination of residual dichloromethane in coronary stent coatings. Validating the method, the quantitative performance of an original stainless steel ion source was compared to that of a modified ion source. Ion source modification included the application of a gold coating on the repeller and exit plate. Several validation aspects such as limit of detection, limit of quantification, linearity and precision were evaluated using both ion sources. It was found that, as expected, the stainless steel ion source suffered from signal drift. As a consequence, non-linearity and high RSD values for repeated analyses were obtained. An additional experiment was performed to check whether an internal standard compound would lead to better results. It was found that the signal drift patterns of the analyte and internal standard were different, consequently leading to high RSD values for the response factor. With the modified ion source however, a more stable signal was observed resulting in acceptable linearity and precision. Moreover, it was also found that sensitivity improved compared to the stainless steel ion source. Finally, the optimized method with the modified ion source was applied to determine residual dichloromethane in the coating of coronary stents. The solvent was detected but found to be below the limit of quantification.     

Multiplexed protein detection using an affinity aptamer amplification assay

Affinity probe capillary electrophoresis (APCE) is potentially one of the most versatile technologies for protein diagnostics, offering an excellent balance between robustness, analysis speed and sensitivity. Combining the immunosensing and separating strength of capillary electrophoresis with the signal enhancement power of nucleic acid amplification, aptamers can further push the analytical limits of APCE to offer ultrasensitive, multiplexed detection of protein biomarkers, even when differences in electrophoretic mobility between the different aptamer-target complexes are limited. It is demonstrated how, through careful selection of experimental parameters, simultaneous detection of picomolar levels of three target proteins can be achieved even with aptamers that were initially selected under very different conditions and further taking into account that the aptamers need to be modified to allow successful PCR amplification. Aptamer-enhanced APCE offers limits of detection that are orders of magnitude lower than those that can be achieved through traditional capillary electrophoresis-based immunosensing. With recent developments in aptamer selection that for the first time realise the promise of aptamers as easily accessible, high affinity recognition molecules, it can therefore be envisioned that aptamer-enhanced APCE on parallel microfluidic platforms can be the basis for a truly high-throughput multiplexed proteomics platform, rivalling genetic screening for the first time.     

Overview of sample introduction techniques prior to GC for the analysis of volatiles in solid materials

Sample preparation and introduction techniques are very critical steps in gas chromatography analysis and particularly in the analysis of volatiles in solid samples. In these cases, they can be divided into two main categories: direct and indirect approaches, based on how the solid sample is treated, i.e. with and without dissolution (or extraction) of analytes from the solid sample. To enable routine application, coupling with sample preparation techniques (especially solid or solvent‐based microextractions) is needed to achieve automation. Here, an overview of the most common sample introduction techniques for gas chromatography with their advantages and drawbacks is presented and discussed, including references to relevant examples. So, this review can serve as guidance for new users.     

Two Efficient and Practical Syntheses of Methyl 4-Mercaptobenzoate

Two efficient syntheses of methyl 4-mercaptobenzoate are described, one utilizing the dianion of 4-bromothiophenol, the other a S_NAr reaction starting with 4-fluorobenzonitrile.