Scanning force microscopy based rapid force curve acquisition on supported lipid bilayers: experiments and simulations using pulsed force mode.

In situ pulsed force mode scanning force microscopy (PFM-SFM) images of phase separated solid-supported lipid bilayers are discussed with the help of computer simulations. Simultaneous imaging of material properties and topography in a liquid environment by means of PFM-SFM is severely hampered by hydrodynamic damping of the cantilever. Stiffness and adhesion images of solid-supported membranes consisting of cholesterol, sphingomyelin, and 1,2-dioleyl-phosphatidylcholine obtained in aqueous solution exhibit contrast inversion of adhesion and stiff. ness images depending on parameters such as driving frequency, amplitude, and trigger setting. Simulations using a simple harmonic oscillator model explain experimental findings and give a deeper insight into the way PFM-SFM experiments have to be performed in order to obtain interpretable results and hence pave the way for reliable material contrast imaging at high speed.     

Defect trapping by100Pd in fcc metals

Lattice defects in Al, Cu, Ag and Au were studied by the perturbed angular correlation technique (PAC) using the probe atom¹⁰⁰Pd/¹⁰⁰Rh. The comparison of data obtained on interstitial trapping in Cu and Au at different probe atoms (¹⁰⁰pd,¹¹¹In) allows defect characterisation less affected by the respective probe. The trapping efficiency of¹⁰⁰Pd for vacancy like defects is quite different to that of¹¹¹In atoms.     

UV-holographic gratings in TS-diacetylene single crystals

Holographic gratings with grating periods between 0.37 m and 4.4 m, respectively, were recorded on the surface of TS-diacetylene single crystals by two interfering 257 nm laser beams. Diffraction efficiencies of up to 35 % were obtained for readout with red light of = 633 nm. The main modulation mechanism was phase modulation. The spatial resolution was better than 1600 lines/mm. The upper limit of the polymer chain length was 0.6 m. The holographic sensitivity was 4.5 cm²/J for immediate read-out at 633 nm without processing after exposure. — A weakly exposed latent hologram may be developed simply by gentle annealing the crystal which increases the sensitivity by one order of magnitude.     

Accurate values for the nonrelativistic energies of the lowest singlet and triplet S-states of the4He-Isotop

Accurate lower and upper bounds for the nonrelativistic lowest energies¹ E ₀ and³ E ₀ of the singlet and triplet-system of the⁴He-Isotop are calculated with the linearized method of variance minimization. The same was done for¹ E ₁ the energy of the first excitedS-state 2¹ S. The results especially for¹ E ₀ and³ E ₀ in a.u. are −2.9033076997₅ ≤¹ E ₀ ≤ −2.9033076921₈ −2.1749324263₇ ≤³ E ₀ ≤ −2.1749324245₉ i.e. the values are determined with an absolute error smaller than 0.00167 cm⁻¹ for¹ E ₀ and 0.00039 cm⁻¹ for³ E ₀.     

Synthesis and modification of terrylenediimides as high-performance fluorescent dyes

Two new synthetic approaches to terrylenediimides, highly photostable fluorescent dyes, are described. For the first time terrylenediimide has been synthesised in a straightforward procedure that makes large quantities available. The second route includes an efficient cross-coupling reaction followed by a cyclodehydrogenation. Monofunctionalisation of the imide structure allows terrylenediimides now to be coupled with a variety of compounds, for example, by Suzuki cross-coupling, which can lead to an array of terrylenediimides with new functional groups such as hydroxy, amino, or carboxy groups needed to link up with other molecules. The functionalisation in the bay region is used to tune the properties of terrylenediimides and extend the range of applications, for example, by introducing water solubility. These tetrasubstituted terrylenediimides offer, depending on the substituents used, exciting features such as good solubility in common organic solvents, water solubility, or NIR absorption.     

Persistent bissilylated arenium ions

A series of bissilylated arenium ions 1 with different substitution patterns on the aryl ring have been synthesized by hydride abstraction from 2-aryl-substituted 2,6-dimethyl-2,6-disilaheptanes (2) via transient silylium ions. The arenium ions have been identified by their characteristic NMR chemical shifts, (delta(29)Si=19.1-25.6, delta(13)C(ipso) =89.0-102.4, delta(13)C(ortho)=160.9-182.0, delta(13)C(meta)=132.5-146.9, delta(13)C(para)=150.2-169.9) supported by quantum mechanical calculations of structures, energies, and magnetic properties at the B3LYP/6-311G(d,p)//B3LYP/6-31G(d) + DeltaZPVE level of theory. The calculations clearly reveal the charge dispersing and stabilizing effect of the silyl substituents in arenium ions 1. The bissilylated benzenium ion 1a is more stable than the parent benzenium ion (C(6)H(7)(+)) by 37.6 kcalmol(-1). The synthesized arenium ions 1 are stable in solution at room temperature for periods ranging from a few hours to days. This unusual stability is attributed to: 1) the thermodynamic stabilization of the arenium ion by two beta-silyl substituents and 2) the essentially non-nucleophilic reaction conditions (the use of the weakly coordinating [B(C(6)F(5))(4)](-) anion and aromatic hydrocarbons as solvents). Addition of stronger nucleophiles than aromatic hydrocarbons (for example, acetonitrile) results in desilylation of the arenium ion 1 and recovery of the 2-aryl-2,6-disilaheptane moiety.     

How we came to produce C60-fullerite

At the beginning two remarks. One to the nomenclature: Fullerite does not name a specific substance; it names a solid entirely consisting of fullerenes, i.e. closed-cage all-carbon molecules. When our method of synthesis is applied, a solid is obtained in which C₆₀ is the most abundant species. This material may thus be called C₆₀-fullerite. The other remark regarding the production of fullerite: in view of the ease with which this could be achieved, I have the feeling that fullerene molecules must belong to a very frequently overlooked molecular species in carbon chemistry. Since the synthesis is simple and does not require many words to be described, I thought it might be interesting to tell how we came to make fullerite.     

Photolithographically patternable nitrate-sensitive acrylate-based membrane

A photocurable acrylate matrix nitrate-sensitive membrane containing 2-nitrophenyl n-octyl ether as mediator and tetraalkylammonium nitrate as an active compound is described. The photocuring was achieved by the use of photoinitiators containing diaryliodonium chloride. This acrylate membrane is patternable via a photolithographic process with a only slight loss of electrochemical characteristics.     

Utilization of cyclotron produced fast neutrons in the activation analysis for oxygen

The possible application of cyclotron-produced fast neutrons to activation analysis for oxygen based on the¹⁶O(n, p)¹⁶N reaction has been investigated. Neutrons were produced by bombarding a thick beryllium target with 22 to 45 MeV deuterons. It was found that the sensitivity increases rapidly with the energy of the deuterons. Using 45 MeV deuterons and a 10 μA beam current a sensitivity of about 20 counts per 1 μg oxigen could be achieved, enabling the determination of less than 1 μg oxigen. In a direct comparison it was experimentally established that the sensitivity for cyclotron-produced neutrons assuming a deuteron beam of about 10 μA, is up to two orders of magnitude higher than that achievable for 14 MeV neutrons with a flux of about 10¹⁰ n/s. The interference of fluorine is at about the same level for both the cyclotron-produced and 14 MeV neutrons. Using cyclotron-produced fast neutrons in the investigated energy range, sodium and magnesium can also interfere, but only to a very much lower extent.     

Beitrag zur Stickstoffschnellbestimmung nach Merz

Zusammenfassung Einige Änderungen an der Apparatur zur Stickstoffschnellbestimmung nachMerz wurden vorgenommen. Dadurch wird erreicht, daß zwischen den einzelnen Verbrennungen Sauerstoff das Verbrennungsrohr durchspült und vor dem Reduktionsrohr nach außen tritt. Der Verbrennungsraum ist daher bereits zu Beginn jeder Analyse mit Sauerstoff gefüllt, wodurch günstigere Bedingungen für die schlagartige Verbrennung erzielt werden. Der Umbau der von der Firma Heraeus gelieferten Apparatur und die Herstellung eines Oxydationskatalysators (Kobaltoxid-Wolframoxid) werden beschrieben.

---

Contribution to the rapid nitrogen determination according to merz

Summary The apparatus for rapid nitrogen determination according toMerz has been modified. Between each two combustions, oxygen is flushed through the combustion tube and is vented before the reduction tube. Therefore, at the beginning of each analysis, the combustion chamber is filled with oxygen, providing a more favorable atmosphere for the rapid ignition. The alterations in the Hereaus apparatus and the preparation of an oxidation catalyst (cobalt oxide and tungsten oxide) are described.