Negative ion mass spectra of dicarboxylic acids

The negative ion mass spectra of dicarboxylic acids show [M]^?˙ and prominent [M – H]^?ions. These ions can therefore be used to determine the molecular weight of dicarboxylic acids which do not give positive molecular ions. The [C₂H₃]^? ion is a base peak in the spectra of maleic and fumaric acids. Isomeric phthalic acids are readily differentiated.     

Through-space electronic interactions of [2.2]metacyclophane benzyl cations

The hydrolysis of 8-bromomethyl[2.2]metacyclophanes 3 to the corresponding 8-hydroxymethyl derivatives 4 was carried out in 83% aqueous dioxane solution at 25°C. Substituent effect through space on the rate of the hydrolysis of bromomethyl groups attached on the opposite aromatic ring was first found in this investigation. Interestingly, the introduction of the substituents at the internal position 16 tends to enhance the hydrolysis reaction rate 10–100 times. It was found also that the stabilization by both the direct through-space cation-π-interaction and the interaction through the intra-annular 8,16-position are possible in the [2.2]metacyclophane 8-benzyl cations. The good correlation with log(K/K_H) and σ_p ⁺ was observed for the hydrolysis of internally unsubstituted 5-bromomethyl[2.2]MCPs 7, in which the direct through-space cation-π-interactions are not possible. TiCl₄ and Nafion-H, a perfluorinated resinsulfonic acid, catalysed Friedel-Crafts benzylation of benzene and substituted benzenes with 8-bromomethyl- and 8-hydroxymethyl[2.2]metacyclophanes to afford 8-benzyl[2.2]metacyclophanes is described. A high substrate and positional selectivity were observed in the present benzylation reaction quite different from those obtained from the benzyl bromide and benzyl alcohol. The benzyl cation intermediate stabilized by the through-space electronic interaction among the opposite benzene ring was first demonstrated in the benzylation of [2.2]metacyclophane systems. The mild and selective transannular reaction attributable to the highly strained character of [2.2]metacyclophane skeleton and the increased stabilization of the 5-benzyl cation intermediate arising from the electronic interactions among the opposite benzene ring through the intra-annular 8,16-positions was also observed.     

Precursor mediated cycloaddition reaction of ethylene to the Si(100)c(4 x 2) surface

We report the direct observation of a precursor state for the cycloaddition reaction (the di-sigma bond formation) of ethylene on Si(100)c(4 x 2) using high-resolution electron energy loss spectroscopy at low temperature, and the meta-stable precursor state is identified as a weakly bonded pi-complex type. The activation energy from the pi-complex precursor to the di-sigma bonded species is experimentally estimated to be 0.2 eV. First-principles calculations support the pi-complex precursor mediated cycloaddition reaction of ethylene on Si(100)c(4 x 2).     

Highly active alumina for aldol condensation of acetone

Eleven kinds of aluminas were prepared from various starting materials by different methods. An alumina prepared from sodium aluminate by precipitation with carbon dioxide was found to exhibit an extraordinarily high catalytic activity for aldol condensation of acetone at 0 °C.

---

. , , 0°C.

     

Chelate formation of zirconium with xylenol orange and semi-xylenol orange

The composition, formation constants, and molar absorptivities of the chelates of zirconium ion wtih xylenol orange and semi-xylenol orange are investigated spectrophotometrically in strong acid medium at ionic strength 3.0 (NaClO₄ and HClO₄). The data obtained were processed with a newly-constructed computer program and with LETAGROP/SPEFO. In the zirconium—xylenol orange system, Zr · H₃ L, Zr· H₄L, and Zr₂ · L are present with logarithmic overall formation constants of 37.80, 38.68, 43.47, and molar absorptivities of 3.10 × 10⁴ (485 nm), 5.98 × 10⁴ (528 nm), 9.50 × 10⁴ (551 nm) I mol^-1 cm^-1, respectively. The chelates Zr · L and Zr · HL were found in the zirconium—semi-xylenol orange system with logarithmic overall formation constants of 26.25 and 27.56, and molar absorptivities of 5.70 × 10⁴ (532 nm) and 8.30 × 10⁴ (535 nm) 1 mol^-1 cm^-1, respectively. Semi-xylenol orange is more sensitive and reliable than xylenol orange as a spectrophotometric reagent for zirconium.     

Effect of initial concentration on stability of panipenem in aqueous solution

The effect of initial panipenem (CAS No. 87726-17-8) concentration on its degradation in an aqueous solution was investigated. The degradation of panipenem followed pseudo-first-order kinetics at all the pH values tested. However, in an acidic solution, the degradation rate increased with the initial panipenem concentration. On the other hand, in an alkaline solution, the degradation rate was not affected by its initial concentration. In an acidic solution, the plots of the first-order rate constants versus initial panipenem concentrations showed a linear relationship. Theoretically, the first-order rate constant is independent of the initial concentration, and therefore, the results suggested unusualness. We investigated the results obtained under acidic conditions in detail to find a very complex reaction mechanism: panipenem and its degradation products are factors causing the unusual increase in the degradation rate. Moreover, it was shown that the dissociation of the carboxyl group played an important role in the degradation of panipenem.     

Hexaazaphenalenyl anion revisited: a highly symmetric planar pi system with multiple-networking ability for self-assembled metal complexation

The hexaazaphenalenyl anion (HAP, 3-), a highly symmetric heterocyclic pi system, has been synthesized and characterized. The crystal structures of its potassium salt K+.3- and copper complex Cu2+.(NH3)4.(3-)2 show pi-pi stacking and radially extended hydrogen bonds as well as coordination bonds constructed by the HAP anion. These in-plane and out-of-plane strong interactions demonstrate the multiple-networking ability of the HAP anion.     

Hydrophilic chain length dependence of the ionic amphiphilic polymer monolayer structure at the air/water interface

Detailed analysis of an interesting poly(methacrylic acid) (PMAA) brush structure in water of a diblock copolymer [(Et(2)SB(m)-b-(MMA)(n), where Et(2)SB is diethylsilacyclobutane] monolayer reported previously was performed by X-ray and neutron reflectometry and indicated that the hydrophilic layer formed with a relatively long PMAA chain is not a simple layer but is divided into two layers, that is, a "carpet"-like dense PMAA layer near the hydrophobic layer and a polyelectrolyte brush layer. The hydrophilic chain length dependence of the diblock copolymer monolayer was analyzed using m:n = 30:x polymer samples, especially of the PMAA double layer structure. With the increase in PMAA chain length in polymer samples, a carpet layer is mainly formed up to n approximately 50. With further increase in the PMAA chain length beyond n approximately 50, a well-defined brush layer appears. On the other hand, the variation in hydrophobic layer thickness with methacrylic acid unit is minimum at the critical PMAA length, that is, n approximately 50 under a constant surface pressure condition. It is strongly suggested that the two discrete layers contribute differently to surface pressure. Furthermore, from the comprehensive viewpoint, the major factor for brush formation was clarified not to be the absolute length of the PMAA chain, but the ratio of PEt(2)SB and PMAA chain length is an important factor.     

Grafting on wool. I. Electron microscopic studies on the location of grafted polymer in wool structure

To determine the location of grafted poly(methyl methacrylate) in orthocortex structure of fine Australian Merino wool fibers, high-resolution electron microscopy was used. Optimal staining conditions for the observation of the deposited polymer were also studied. It was supposed that the grafted polymer is located mainly between the microfibril and matrix and around the protofibrillar subunits, but not in the matrix. The average space occupied by a grafted chain was estimated to be about four times as large as the total residue volume per polymer. It is supposed that the remarkably large space available per polymer chain is related to the excessive swelling seen with respect to the polymer uptake.     

Micellization of non-surface-active diblock copolymers in water. Special characteristics of poly(styrene)-block-poly(styrenesulfonate)

Strongly ionized amphiphilic diblock copolymers of poly(styrene)-b-poly(styrenesulfonate) with various hydrophilic and hydrophobic chain lengths were synthesized by living radical polymerization, and their properties and self-assembling behavior were systematically investigated by surface tension measurement, foam formation, hydrophobic dye solubilization, X-ray reflectivity, dynamic light scattering, small-angle neutron scattering, small-angle X-ray scattering, and atomic force microscope techniques. These copolymer solutions in pure water did not show a decrease of surface tension with increasing polymer concentration. The solutions also did not show foam formation, and no adsorption at the air/water interface was confirmed by reflectivity experiments. However, in 0.5 M NaCl aq solutions polymer adsorption and foam formation were observed. The critical micelle concentration (cmc) was observed by the dye solubilization experiment in both the solutions with and without added salt, and by dynamic light scattering we confirmed the existence of polymer micelles in solution, even though there was no adsorption of polymer molecules at the water surface in the solution without salt. By the small-angle scattering technique, we confirmed that the micelles have a well-defined core-shell structure and their sizes were 100-150 A depending on the hydrophobic and hydrophilic chain length ratio. The micelle size and shape were unaffected by addition of up to 0.5 M salt. The absence of polymer adsorption at the water surface with micelle formation in a bulk solution, which is now known as a universal characteristic for strongly ionized amphiphilic block copolymers, was attributed to the image charge effect at the air/water interface due to the many charges on the hydrophilic segment.