Long-range ordered thin films of block copolymers prepared by zone-casting and their thermal conversion into ordered nanostructured carbon

Large-scale alignment of lamellae in thin films of diblock copolymers containing polyacrylonitrile and poly(n-butyl acrylate) was achieved by casting copolymer solution on a silicon substrate moved away at a constant speed from the casting nozzle (zone-casting). Grazing incidence small-angle X-ray scattering revealed that the lamellae, which were perpendicular to the substrate, were also aligned over macroscopic scale in the direction perpendicular to the casting direction. Such long-range ordered block copolymer films were then converted by pyrolysis into nanostructured carbons, with excellent preservation of lamellar morphology and orientation.     

Self-assembly of pODMA-b-ptBA-b-pODMA triblock copolymers in bulk and on surfaces. A quantitative SAXS/AFM comparison

The phase state of a series of poly(n-octadecyl methacrylate)-b-poly(tert-butyl acrylate)-b-poly(n-octadecyl methacrylate) (pODMA-b-ptBA-b-pODMA) triblock copolymers, synthesized through atom transfer radical polymerization, has been investigated in bulk and on surfaces using small-angle X-ray scattering and atomic force microscopy, respectively. The mean-field theory was employed to construct the bulk phase diagram. Excellent agreement was found between the bulk and surface morphologies as well as for the domain spacing (domain spacing scaled as d approximately equal to N(0.64)), suggesting that the strong polymer-polymer interactions in bulk are also the dominant interactions on surfaces.     

Polyolefin graft copolymers via living polymerization techniques: Preparation of poly(n‐butyl acrylate)‐graft‐polyethylene through the combination of Pd‐mediated living olefin polymerization and atom transfer radical polymerization

Poly(n‐butyl acrylate)‐graft‐branched polyethylene was successfully prepared by the combination of two living polymerization techniques. First, a branched polyethylene macromonomer with a methacrylate‐functionalized end group was prepared by Pd‐mediated living olefin polymerization. The macromonomer was then copolymerized with n‐butyl acrylate by atom transfer radical polymerization. Gel permeation chromatography traces of the graft copolymers showed narrow molecular weight distributions indicative of a controlled reaction. At low macromonomer concentrations corresponding to low viscosities, the reactivity ratios of the macromonomer to n‐butyl acrylate were similar to those for methyl methacrylate to n‐butyl acrylate. However, the increased viscosity of the reaction solution resulting from increased macromonomer concentrations caused a lowering of the apparent reactivity ratio of the macromonomer to n‐butyl acrylate, indicating an incompatibility between nonpolar polyethylene segments and a polar poly(n‐butyl acrylate) backbone. The incompatibility was more pronounced in the solid state, exhibiting cylindrical nanoscale morphology as a result of microphase separation, as observed by atomic force microscopy. © 2002 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 40: 2736–2749, 2002     

Regioregular Poly(3‐hexylthiophene) in a Novel Conducting Amphiphilic Block Copolymer

Regioregular poly(3‐hexylthiophene) has been successfully incorporated into a novel amphiphilic block copolymer. The amphiphilic nature of poly(3‐hexylthiophene)‐block‐poly(acrylic acid) has been investigated using spectroscopic methods and has yielded solvatochromic behavior in several solvents of varying polarity. Evidence suggests that a supramolecular, long range ordering of block copolymer occurs in polar solvents, resulting in the formation of aggregates. Despite relatively large amounts of non‐conductive blocks, the poly(3‐hexylthiophene) diblock copolymer yields a high conductivity of 1 S · cm⁻¹, and atomic force microscopy shows the formation of a highly organized nanofibrilar morphology in the solid state.

     

Use of Thermoanalytical Methods in Prediction of Thermal Endurance of Insulating Impregnating Varnishes

The results of testing the thermal properties of insulating impregnated varnishes obtained by thermoanalytical methods and based on the IEC 216 standard are presented. It was found that the temperature index determined by means of thermoanalytical testing is quite close to that derived by a conventional standardized procedure. It was also established that thermoanalytical methods could be used in the recipe selection for the development of a new varnish. The results obtained confirmed the possibility of using thermoanalytical methods for a quick, prognostic estimation of the thermal endurance of insulating impregnating varnishes. This revised version was published online in August 2006 with corrections to the Cover Date.     

Thermoresponsive Hydrogel Scaffolds with Tailored Hydrophilic Pores

Thermoresponsive hydrogels with efficient water‐release channels were prepared by incorporating star‐shaped macromolecular pore precursors, with degradable disulfide crosslinked cores and hydrophilic poly(ethylene oxide) (PEO) arms, into the gel network. The gel framework exhibiting lower critical solution temperature (LCST) behavior was synthesized by atom transfer radical polymerization (ATRP) of 2‐(2‐methoxyethoxy)ethyl methacrylate and ethylene glycol dimethacrylate. The incorporation of degradable star macromolecules (dSM) was facilitated by growing the gel from ATRP initiator sites contained within their cores. Following the formation of the gel, the dSM cores were degraded, yielding uniform pores lined with hydrophilic PEO chains. The effect of hydrophilic pores on thermoresponsive hydrogel performances was studied by comparing hydrogels containing hydrophilic pores with analogous hydrogels with neutral pores or with pore‐free controls. Dye absorption/release experiments pointed to the suitability of newly synthesized hydrogels as controlled‐release media, for example, for drug delivery. Cell culture experiments confirmed their nontoxicity and biocompatibility (cell viability>98 %).     

Stille Catalyst‐Transfer Polycondensation Using Pd‐PEPPSI‐IPr for High‐Molecular‐Weight Regioregular Poly(3‐hexylthiophene)

A commercially available palladium N‐heterocyclic carbene (Pd‐NHC) precatalyst is used to initiate chain‐growth polymerization of 2‐bromo‐3‐hexyl‐5‐trimethylstannylthiophene. The molecular weight of the resultant poly(3‐hexylthiophene) can be modulated (7 to 73 kDa, Đ = 1.14 to 1.53) by varying the catalyst concentration. Mass spectrometry data confirm control over the polymer end groups and ¹H NMR spectroscopy reveals that the palladium catalyst is capable of “ring‐walking”. A linear relationship between M_n and monomer conversion is observed. Atomic force microscopy and X‐ray scattering verify the regioregular nature of the resultant polythiophene.