Cyclic deformation of aluminium and its alloys

The formation of slip bands is the main mechanism of cyclic deformation in pure Al. Their density, orientation and heights in polycrystalline Al were investigated during cycling. Types, sizes and densities of precipitates are responsible for the mode of cyclic deformation in AlCu4 pure alloy. In technical Al alloys intermetallic phases have detrimental effects on deformation homogeneity and largely govern the fatigue mechanism of the material and especially microcrack initiation.     

Structural and electrical properties of quasicrystalline Al-14 at% Mn alloy

Quasicrystalline Al-14 at. % Mn alloy was prepared by melt-spinning and its structural and electrical properties were studied. This alloy consists of icosahedral grains with sizes from 1 to 4 m and of crystalline aluminium phase. The electrical resistivity was almost temperature independent with a value of about 765 n gWm at 4·2 K.     

The influence of temperature on superplasticity of Zn-Al-Cd alloy

Experimental results of the study of superplastic behaviour in Zn-0·35 wt. % Al-0·25 wt. % Cd alloy are presented. The attention has been paid to the influence of temperature on stress-strain curves, ductility, strain rate sensitivy parameterm and activation energy of superplastic flow. The best superplastic properties have been established at temperatures T370 K (0·53 T_m): ductilityA=600% and parameterm=0·56. A fast grain growth observed at temperaturesT 380 K has been suggested to be responsible both for the decrease in ductility and parameterm values and for the origin of an anomaly in the decreasing temperature dependence of flow stress. The measurements of activation energy have shown an expected decrease in activation energy at the transition from the non-superplastic region at lower temperatures to the superplastic region at higher temperatures. Significant transient effects after strain rate changes have been observed. The experimental results obtained in the Zn-Al-Cd alloy have been compared with those obtained in binary Zn-1·1 wt. % Al alloy and discussed from the point of view of possible models of structural superplasticity.     

Excitation functions for some output channels following the p +55Mn interaction atE p=1·3–2·0 MeV

Excitation functions for the⁵⁵Mn(p, p )⁵⁵Mn,⁵⁵Mn(p, n )⁵⁵Fe and⁵⁵Mn(p, )⁵⁶Fe reactions are studied for proton beam energyE _p=1·3–2 MeV. The excitation functions are established from yield functions for -rays emitted from the first excited states of final nuclei. Many resonances are observed and competition of their decay into all three output channels is analysed. Spin-parity assignment for some resonant states in the⁵⁶Fe compound nucleus is deduced.Participated partly in the course of his work on a Thesis.The authors wish to thank the staff of the Van de Graaff accelerator at Charles University in Prague for the efficient operation of the machine and dr. I. Wilhelm for the valuable technical help in the early period of the experimental work. One of us (N. A. N.) acknowledges the staff of the Dept. of Nuclear Physics of Charles University in Prague for the excellent working conditions.     

Softening during and after the hot deformation of the AISI 321 steel with respect to practical applications

The softening processes during and after the hot deformation (850–1180 C) in AISI 321 stainless steel were studied with respect to true strains _D and true strain rates . The analysis of deformation curves indicates the occurrence of dynamic recrystallization for values of Zener-Hollomon parameterZ10¹⁵ s^–1. The retardation of static recrystallization by fine Ti(N, C) precipitates is documented by microstructure studies and by variations of annealing conditions.     

Searching for optimal configurations by simulated tunneling

Optimization theory deals with algorithms finding the lowest cost (energy) configuration in a minimal number of steps. When the cost function has many local minima, the deterministic algorithms become easily trapped in suboptimal solutions. The simulated annealing method tries to overcome this difficulty by introducting thermal noise in the problem. Here we explore the possibility of implementing search procedures analogous to the quantum tunneling effect. The suggested dynamics is a guided diffusion process of an interactingpopulation of configurations. Different dynamical aspects of the search process are formulated first in a simple one-dimensional tight-binding model with a hierarchical potential. The new algorithm is then applied to the Traveling Salesman Problem. It is demonstrated that the use of interacting, evolving populations of tours representing our wave packet leads to systematic improvements and possibly, to the optimal tour. In addition, the structure of the cost function landscape for a given instance becomes locally accessible. The performance of the algorithm and its implications for parallel computing and genetic programming are briefly discussed.     

Characterization of reaction products formed during thin-layer chromatographic detection of thiocarbamate herbicides

The reaction between thiocarbamate herbicides and 2,6-dichlorobenzoquinone-N-chloroimine or 2,6-dibromobenzoquinone-N-chloroimine is suitable for the detection of these herbicides on thin-layer plates with high sensitivity. The reactions were followed by infrared, nuclear magnetic resonance and mass spectrometry. We have established the formation of 2,6-dichlorobenzoquinone-S-alkyl sulphenylimines. In the case of the bromo-derivative, halogen exchange and substitution on the quinone ring took place simultaneously leading to the formation of mixed halogenated 2,6-dihalo- and, in addition, 2,3,6-trihalobenzoquinone-S-alkyl sulphenylimines. The final product of the detection reaction, i.e. 2,6-dichlorobenzoquinone-S-alkyl sulphenylimine was reacted with 2,6-dibromobenzoquinone-N-chloroimine where 2,6-dichloro-3-bromobenzoquinone-S-alkyl sulphenylimine formed as a consequence of the looser bromine-carbon linkage on the 2 and 6 positions of the quinone ring.     

Scalar gluonium candidates and the radiativeJ/ψ decays

We discuss productions of scalar gluonium candidates in the radiativeJ/ decays. The branching ratios of such productions are estimated on the basis of the Euler-Heisenberg effective Lagrangian for gluon-photon couplings. We mention that these estimates cannot be expected to be accurate to better than within a factor 2. We show that the radiativeJ/ decays probably invalidate gluoniumgg interpretation of the GAMS meson F₀(1590) and a narrow 0⁺⁺ stateS lying below 1 GeV. However, a possible wide scalar effective gluonium candidate(920) is shown not to be excluded by the data on the decayJ/. We also find that the experimental data about radiativeJ/ decays presumably agree with a recently suggested interpretation of F₀(1590) as being approximately a half-and-half mixture of pure 0⁺⁺ gluoniumgg andSU(3)_f singlet quarkoniumq¯q states.