PH-Zone-refining counter-current chromatography of lappaconitine from Aconitum sinomontanum nakai I. Separation of prepurified extract

pH-Zone-refining counter-current chromatography was applied to the separation of diterpenoid alkaloids from a crude sample from a crude prepurified sample containing lappaconitine at about 90% purity using a multilayer coil planet centrifuge. The experiment was performed with a two-phase solvent system composed of methyl tert.-butyl ether-tetrahydrofuran-distilled water (2:2:3, v/v) where triethylamine (10 mM) was added to the upper organic stationary phase as a retainer and hydrochloric acid (10 mM) to the aqueous mobile phase as an eluter. The separation of 10.5 g of the sample yielded 9.0 g of lappaconitine at a high purity of over 99% as determined by HPLC.     

Reaction of [M(eta3-allyl)(eta2-amidinato)(CO)2(pyridine)] complexes (M = Mo, W) with bidentate ligands: nitrogen donor vs. phosphorus donor

The reactivity of amidinato complexes of molybdenum and tungsten bearing pyridine as a labile ligand, [M(eta(3)-allyl)(eta(2)-amidinato)(CO)(2)(pyridine)](M = Mo; 1-Mo, M = W; 1-W), toward bidentate ligands such as 1,10-phenanthroline (phen) and 1,2-bis(diphenylphosphino)ethane (dppe) was investigated. The reaction of 1 with phen at ambient temperature resulted in the formation of monodentate amidinato complexes, [M(eta(3)-allyl)(eta(1)-amidinato)(CO)(2)(eta(2)-phen)](M = Mo; 2-Mo, M = W; 2-W), which has pseudo-octahedral geometry with the amidinato ligand coordinated to the metal in an eta(1)-fashion. The phen ligand was located coplanar with two CO ligands and the eta(1)-amidinato ligand was positioned trans to the eta(3)-allyl ligand. In solution, both complexes 2-Mo and 2-W showed fluxionality, and complex 2-Mo afforded allylamidine (3) on heating in solution. In the reaction of 1 with dppe at ambient temperature, the simple substitution reaction took place to give dppe-bridged binuclear complexes [{M(eta(3)-allyl)(eta(2)-amidinato)(CO)(2)}(2)(mu-dppe)](M = Mo; 5-Mo, M = W; 5-W), whereas mononuclear monocarbonyl complexes [M(eta(3)-allyl)(eta(2)-amidinato)(CO)(eta(2)-dppe)](M = Mo; 6-Mo, M = W; 6-W) were obtained under acetonitrile- or toluene-refluxing conditions. Mononuclear complex 6 was also obtained by the reaction of binuclear complex 5 with 0.5 equivalents of dppe under refluxing in acetonitrile or in toluene. The X-ray analyses and variable-temperature (31)P NMR spectroscopy of complex 6 indicated the existence of the rotational isomers of the eta(3)-allyl ligand, i.e., endo and exo forms, with respect to the carbonyl ligand. The different reactivity of complex 1 toward phen and dppe seems to have come from the difference in the pi-acceptability of each bidentate ligand.     

Separation of rare earth elements by high-speed counter-current chromatography

Besides being widely used in electronic and glass industries, rare earth elements have recently been found to have important biological effects including the ability to stabilize and enhance interferon activity [J.J. Sedmak and S.E. Grossberg, J. Gen. Virol, 52 (1981) 195]. In this paper, the rare earth elements have been separated using a high-speed counter-current chromatography (HSCCC) centrifuge equipped with three multilayer coils connected in series. Two-phase solvent systems were composed of n-heptane containing di-(2-ethylhexyl)phosphoric acid (stationary phase) and dilute hydrochloric acid (mobile phase) where the partition coefficient of each can be optimized by selecting the proper hydrochloric acid concentration. The mobile phase was eluted through the column at a flow-rate of 5 ml/min, while the apparatus was rotated at 900 rpm. Continuous detection of the rare earth elements was effected by means of a post-column reaction with arsenazo III and the elution curve was obtained by on-line monitoring at 650 nm. Excellent isocratic separations of closely related rare earth elements were achieved at high partition efficiencies up to several thousand theoretical plates. Versatility of the present method was demonstrated in an exponential gradient elution of hydrochloric acid concentration where fourteen rare earth elements were all resolved in about 4.5 h.     

Synthesis of bridgeheaded nitrogen systems. s-triazolo[4,3-b]-as-triazine,s-triazolo[4,3-d]-as-triazine and s-triazolo[3,4-b]-1,3,4-Thiadiazole ring systems

By the reactions of hydrazino-as-triazines ( 1a-d and 5 ) with cyanogen bromide were synthesized s-triazolo-as-triazines ( 2a-d ) and ( 6 ). Likewise, similar reactions of amino-s-triazolethiols ( 7a-e ) gave s-triazolo-1,3,4-thiadiazoles ( 8a-e ). Compound 2a was brominated to 2g.     

A dramatic elongation of the lifetime of charge-separated state by complexation with yttrium triflate in ferrocene-anthraquinone linked dyad

Seven million times elongation of the lifetime of charge-separated state is attained in the presence of yttrium triflate [Y(OTf)3] in the photoinduced electron-transfer reaction of a ferrocene-anthraquinone dyad (Fc-AQ) with a rigid amide spacer in benzonitrile at 298 K as compared with the lifetime in its absence. Such remarkable elongation of the CS lifetime in the presence of Y(OTf)3 results from the strong binding of Y(OTf)3 with the AQ*- moiety of Fc+-AQ*-.     

Spectral, electrochemical, and photophysical studies of a magnesium porphyrin-fullerene dyad

A covalently linked magnesium porphyrin-fullerene (MgPo-C60) dyad was synthesized and its spectral, electrochemical, molecular orbital, and photophysical properties were investigated and the results were compared to the earlier reported zinc porphyrin-fullerene (ZnPo-C60) dyad. The ab initio B3LYP/3-21G(*) computed geometry and electronic structure of the dyad predicted that the HOMO and LUMO are mainly localized on the MgP and C60 units, respectively. In o-dichlorobenzene containing 0.1 M (n-Bu)4NClO4, the synthesized dyad exhibited six one-electron reversible redox reactions within the potential window of the solvent. The oxidation and reduction potentials of the MgP and C60 units indicate stabilization of the charge-separated state. The emission, monitored by both steady-state and time-resolved techniques, revealed efficient quenching of the singlet excited state of the MgP and C60 units. The quenching pathway of the singlet excited MgP moiety involved energy transfer to the appended C60 moiety, generating the singlet excited C60 moiety, from which subsequent charge-separation occurred. The charge recombination rates, k(CR), evaluated from nanosecond transient absorption studies, were found to be 2-3 orders of magnitude smaller than the charge separation rate, k(CS). In o-dichlorobenzene, the lifetime of the radical ion-pair, MgPo*+-C60*-, was found to be 520 ns which is longer than that of ZnPo*+-C60*- indicating better charge stabilization in MgPo-C60. Additional prolongation of the lifetime of MgPo*+-C60*- was achieved by coordinating nitrogenous axial ligands. The solvent effect in controlling the rates of forward and reverse electron transfer is also investigated.     

Efficient intracellular delivery of rifampicin to alveolar macrophages using rifampicin-loaded PLGA microspheres: effects of molecular weight and composition of PLGA on release of rifampicin

Monodispersed PLGA microspheres containing rifampicin (RFP) have been prepared by solvent evaporation method using a Shirasu porous glass (SPG) membrane. The microspheres were spherical and their average diameter was about 2 microm. The loading efficiency of rifampicin was dependent on the molecular weight of PLGA. The higher loading efficiency was obtained by the usage of PLGA with the lower molecular weight, which may be caused by the interaction of the amino groups of rifampicin with the terminal carboxyl groups of PLGA. PLGA with the monomer compositions of 50/50 and 75/25, of lactic acid/glycolic acid, were used in this study. From rifampicin-loaded PLGA microspheres formulated using PLGA with the molecular weight of 20,000, rifampicin was released with almost constant rate for 20 days after the lag phase was observed for the initial 7 days at pH 7.4. On the other hand, from rifampicin-loaded PLGA microspheres formulated using PLGA with the molecular weight of 5000 or 10,000, almost 90% of rifampicin-loaded in the microspheres was released in the initial 10 days. Highly effective delivery of rifampicin to alveolar macrophages was observed by the usage of rifampicin-loaded PLGA microspheres. Almost 19 times higher concentration of rifampicin was found to be incorporated in alveolar macrophages when rifampicin-loaded PLGA microspheres were added to the cell culture medium than when rifampicin solution was added.     

Ruthenium-catalyzed formal [4 + 2] cycloaddition of alkynes with alkenes: formation of cyclohexenedicarboxylates via isomerization of alkynes and successive Diels-Alder reaction

Formal [4 + 2] cycloaddition of alkynes with electron-deficient alkenes, which affords 3,6-dialkyl-4-cyclohexene-1,2-dicarboxylates, was achieved using Ru(η⁶-1,3,5-cyclooctatriene)(η²-dimethyl fumarate)₂ as a catalyst. The reaction mechanism consists of two steps, isomerization of an alkyne to conjugated dienes and successive Diels-Alder reaction of the generated dienes with an electron-deficient alkene.     

Separation of enantiomers on anion exchangers modified with heparin in liquid chromatography

Hepatitis B virus surface antigen (HBsAg) particles were efficiently adsorbed (retained) on a Sulfate-cellulose (S-C) bead column, and then desorbed with sodium chloride solutions (0.5-3.0 M). The HBsAg particles were not efficiently retained onto either sulfopropyl-agarose (SP-A) or quaternary amine-agarose (Q-A) at pH 4.5, 6 and 8. The size-exclusion curve showed that proteins of molecular mass higher than ca. 20,000 cannot penetrate into the pores of S-C beads. The dynamic binding capacity (DBC) values of lysozyme (ca. 7 mg/ml-gel) and of gamma-globulin (ca. 3 mg/ml gel) for S-C did not depend on the flow velocity while the DBC of gamma-globulin for SP-A decreased sharply with an increase in flow velocity. These results indicated that very large molecules are adsorbed only onto the surface of S-C, which resulted in fast adsorption-desorption rates although the equilibrium adsorption capacity is lower than conventional porous gel beads. Because of the rapid adsorption rate, the DBC values of gamma-globulin for S-C at high flow-rate regions are similar to those for SP-A. Bovine serum albumin was not adsorbed onto S-C. As this can not be explained by a simple electrostatic interaction mechanism, molecular recognition of S-C might be different from the agarose-based ion-exchange beads.     

Spectroelectrochemical studies on mixed-valence states in a cyanide-bridged molecular square, [Ru(II)(2)Fe(II)(2)(mu-CN)(4)(bpy)(8)](PF6)(4).CHCl(3).H(2)O

A cyanide-bridged molecular square of [Ru(II) (2)Fe(II) (2)(mu-CN)(4)(bpy)(8)](PF(6))(4).CHCl(3).H(2)O, abbreviated as [Ru(II) (2)Fe(II) (2)](PF(6))(4), has been synthesised and electrochemically generated mixed-valence states have been studied by spectroelectrochemical methods. The complex cation of [Ru(II) (2)Fe(II) (2)](4+) is nearly a square and is composed of alternate Ru(II) and Fe(II) ions bridged by four cyanide ions. The cyclic voltammogram (CV) of [Ru(II) (2)Fe(II) (2)](PF(6))(4) in acetonitrile showed four quasireversible waves at 0.69, 0.94, 1.42 and 1.70 V (vs. SSCE), which correspond to the four one-electron redox processes of [Ru(II) (2)Fe(II) (2)](4+) right arrow over left arrow [Ru(II) (2)Fe(II)Fe(III)] (5+) right arrow over left arrow [Ru(II) (2)Fe(III) (2)](6+) right arrow over left arrow [Ru(II)Ru(III)Fe(III) (2)](7+) right arrow over left arrow [Ru(III) (2)Fe(III) (2)](8+). Electrochemically generated [Ru(II) (2)Fe(II)Fe(III)](5+) and [Ru(II) (2)Fe(III) (2)](6+) showed new absorption bands at 2350 nm (epsilon =5500 M(-1) cm(-1)) and 1560 nm (epsilon =10 500 M(-1) cm(-1)), respectively, which were assigned to the intramolecular IT (intervalence transfer) bands from Fe(II) to Fe(III) and from Ru(II) to Fe(III) ions, respectively. The electronic interaction matrix elements (H(AB)) and the degrees of electronic delocalisation (alpha(2)) were estimated to be 1090 cm(-1) and 0.065 for the [Ru(II) (2)Fe(II)Fe(III) (2)](5+) state and 1990 cm(-1) and 0.065 for the [Ru(II) (2)Fe(III) (2)](6+) states.