Influence of isosorbide dinitrate concentration on its skin permeability from adhesive matrix devices.

Adhesive matrix devices containing a model drug, isosorbide dinitrate (ISDN), were prepared with three different types of pressure sensitive adhesives (PSAs). ISDN permeation through excised hairless rat skin from the different devices was measured in vitro. For each PSA type, the steady state permeation rate of ISDN increased proportionally with an increase of ISDN concentration in the PSA and reached a maximum level at a certain concentration. Although the concentrations reaching the maximum skin permeation level varied among PSA types, the maximum rate for each PSA type was largely similar to that for ISDN aqueous suspension. The release rate of ISDN from devices was too fast to influence the skin permeation rate for all devices. In the PSA of devices showing maximum skin permeability, ISDN crystalline was observed by polarizing microscopy and differential scanning calorimetry. These results suggest that the skin permeation of ISDN from adhesive matrix devices was controlled by the thermodynamic activity of the drug in the PSAs.     

Total synthesis of haliclamine A, a macrocyclic marine alkaloid related to the key biogenetic intermediate of manzamines

The first total synthesis of haliclamine A (1), a macrocyclic marine alkaloid closely related to the key bisdihydropyridine intermediate 3 of the biogenetically unique manzamine family, has been efficiently achieved via stepwise inter- and intramolecular N-alkylations of 3-alkylpyridine derivatives 26 and 28.     

Synthetic studies directed toward the assembly of the C-glycoside fragment of the telomerase inhibitor D8646-2-6

[reaction: see text] Construction and characterization of the C-glycosidic moiety of telomerase inhibitor D8646-2-6 (1) are described. This is the first example of the C-glycosylation using electron-poor aromatics, 4-hydroxypyrone, as a glycosyl acceptor. The glycosylation reaction and base-promoted isomerization affords desired beta-C-glycoside in a 61% overall yield.     

Multicolor photochromism of two- and three-component diarylethene crystals

Novel photochromic single crystals composed of three different kinds of diarylethenes, 1,2-bis(3,5-dimethyl-2-thienyl)perfluorocyclopentene (1a), 1,2-bis(2,5-dimethyl-3-thienyl)perfluorocyclopentene (2a), and 1,2-bis(2-methyl-5-p-methoxyphenyl-3-thienyl)perfluorocyclopentene (3a), have been prepared. The three-component crystals turned yellow, orange, red, purple, blue, green, or black upon irradiation with light of appropriate wavelengths. The colors of the crystals were thermally stable in the dark and completely bleached by irradiation with visible light. Such multicolored photochromic crystals have potential for the application to optoelectronic devices, such as multifrequency three-dimensional optical memory media or full-color displays.     

Prodrugs of 2',3'-dideoxyinosine (DDI): improved oral bioavailability via hydrophobic esters.

Five ester prodrugs of 2'3'-dideoxyinosine (DDI) were synthesized for the purpose of improving oral bioavailability. The prodrugs, acetate (C2-DDI), octanoate (C8-DDI), stearate (C18-DDI), benzoate (Bz-DDI), and hemisuccinate (Suc-DDI) were proved to quantitatively regenerate their parent drug by enzymatic hydrolysis. Though the chemical stability of the prodrugs under acidic conditions was not improved, their solubility in water was significantly decreased by esterification, except for Suc-DDI. Bioavailability was evaluated by oral administration to rats. Two hydrophobic prodrugs (C8-DDI and Bz-DDI) showed higher absolute bioavailability (23.5% and 31.0%, respectively) than did DDI (15.2%), though that of C2-DDI (11.5%) and Suc-DDI (4.5%) was poor.     

Regioselective synthesis and biological activity of oxidized chitosan derivatives

Oxidized chitosan derivatives with various degrees of oxidation (DS, 0.1–1.0) were prepared by the treatment of chitosan with CrO₃/aq HClO₄ or by the oxidation of ­3‐O‐ and N‐protected chitosan with 30% aq H₂O₂/Na₂WO₄ followed by 3‐O‐ and N‐deprotection. The oxidized products were then N‐acetylated with Ac₂O in order to improve their water‐solubility. Although the oxidized chitosan derivative of DS 0.28 and the degree of N‐acetylation of chitosan (DA) 38% was insoluble in the pH 3–8 region, that of DS 0.26 and DA 76% was soluble in the neutral pH range. The newly‐prepared acetylated and oxidized chitosan derivatives were found to suppress the chemiluminescence response of inflammatory cells such as canine polymorphonuclear cells (PMNs). Analysis by the surface plasmon resonance method revealed that the bind and release behavior of PMNs to acetylated oxidized chitosan derivatives was similar to that against carboxymethylated chitosan derivatives. The amount of water‐soluble chitosan derivative bound to cytokine IL‐8 was found to be affected by the structural and electronic features of the chitosan substituents in the chitosan chain. Copyright © 2003 John Wiley & Sons, Ltd.     

Correlation between oxygen consumption and photobleaching during in vitro photodynamic treatment with ATX-S10.Na(II) using pulsed light excitation: dependence of pulse repetition rate and irradiation time

We revealed that in ATX-S10.Na(II)(13,17-bis (1-carboxypropionyl) carbamoylethyl-8-etheny-2-hydroxy-3-hydroxyiminoethylidene-2,7,12,18-tetraethyl porphyrin sodium)-mediated photodynamic therapy using 667 nm nanosecond-pulsed light excitation at a peak intensity of 2.0 MW/cm(2), phototoxicity increased with decreasing pulse repetition rate in the range of 5-30 Hz for A549 cell cultures. To examine the relation between the reaction mechanism and measured phototoxicity, we carefully measured the kinetics of photochemical oxygen consumption and photobleaching during irradiation of ATX-S10.Na(II)-sensitized A549 monolayer cultures. Measurements of oxygen consumption with a microelectrode, which was performed just above the cells, showed that there was no significant difference between the magnitudes of decrease in oxygen at the three repetition rates at the same cumulative fluence. Loss of ATX-S10.Na(II) fluorescence intensity also exhibited little repetition rate dependence when compared at the same cumulative fluence. We investigated the correlation between oxygen consumption and photobleaching during irradiation and obtained "fluorescence-oxygen diagrams." The diagrams showed dynamic changes between oxygen-dependent and oxygen-independent photobleaching at the higher repetition rates of 10 and 30 Hz, whereas such change was not clearly seen over the whole irradiation time at 5 Hz. These results suggest that the reduced phototoxicity at high repetition rates might be due to an oxygen-independent reaction. We presumed that the change in the reaction mechanism was associated with the local concentrations of the photosensitizer and oxygen in cells during irradiation.     

Thallium-201 chloride dynamic analysis using thallium-201 chloride and sodium iodide-131 thyroid subtraction scintigraphy

The mechanism of 201Tl chloride accumulation is unclear in thyroid gland and thyroid tumor. This report examines 108 patients that received thyroid scintigraphy examinations with both 201Tl chloride and sodium 131I. The patients were diagnosed clinically and histologically whenever possible. The ROI were obtained by subtraction imaging with both isotopes and by subtraction positive and negative areas of imaging. Dynamic curves were obtained for 201Tl chloride per square unit of each ROI. The dynamic curve in the radioiodide-accumulated area was examined. The data indicate that the clearance rate of 201Tl chloride (T15) was correlated with the sodium 131I uptake rate at 24 h (r = 0.70).     

Selectivity of stationary phases in reversed-phase liquid chromatography based on the dispersion interactions

Selectivity of 15 stationary phases was examined, either commercially available or synthesized in-house. The highest selectivity factors were observed for solute molecules having different polarizability on the 3-(pentabromobenzyloxy)propyl phase (PBB), followed by the 2-(1-pyrenyl)ethyl phase (PYE). Selectivity of fluoroalkane 4,4-di(trifluoromethyl)-5,5,6,6,7,7,7-heptafluoroheptyl (F13C9) phase is lowest among all phases for all compounds except for fluorinated ones. Aliphatic octyl (C8) and octadecyl (C18) phases demonstrated considerable selectivity, especially for alkyl compounds. While PBB showed much greater preference for compounds with high polarizability containing heavy atoms than C18 phase, F13C9 phase showed the exactly opposite tendency. These three stationary phases can offer widely different selectivity that can be utilized when one stationary phase fails to provide separation for certain mixtures. The retention and selectivity of solutes in reversed-phase liquid chromatography is related to the mobile phase and the stationary phase effects. The mobile phase effect, related to the hydrophobic cavity formation around non-polar solutes, is assumed to have a dominant effect on retention upon aliphatic stationary phases such as C8, C18. In a common mobile phase significant stationary phase effect can be attributed to dispersion interaction. Highly dispersive stationary phases such as PBB and PYE retain solutes to a significant extent by (attractive) dispersion interaction with the stationary phase ligands, especially for highly dispersive solutes containing aromatic functionality and/or heavy atoms. The contribution of dispersion interaction is shown to be much less on C18 or C8 phases and was even disadvantageous on F13C9 phase. Structural properties of stationary phases are analyzed and confirmed by means of quantitative structure-chromatographic retention (QSRR) study.     

Energy Dissipation Processes of singlet‐excited 1‐Hydroxyfluorenone and its Hydrogen‐bonded Complex with N‐methylimidazole¶

Effects of solvent, pH and hydrogen bonding with N‐methylimidazole (MIm) on the photophysical properties of 1‐hydroxyfluorenone (1HOF) have been studied. Fluorescence lifetime, fluorescence quantum yield and triplet yield measurements demonstrated that intersystem crossing was the dominant process in apolar media and its rate constant significantly diminished with increasing solvent polarity. The acceleration of internal conversion in alcohols paralleled the strength of intermolecular hydrogen bonding. The faster energy dissipation from the singlet‐excited state in cyclohexane was attributed to intramolecular hydrogen bonding. The pK_a of 1HOF decreased from 10.06 to 5.0 on light absorption, and H₃O⁺ quenched the singletexcited molecules in a practically diffusion‐controlled reaction. On addition of MIm in toluene, dual fluorescence was observed, which was attributed to reversible formation of excited hydrogen‐bonded ion pair. Rate constants for the various deactivation pathways were derived from the combined analysis of the steady‐state and the time‐resolved fluorescence results.