3-羟基丁酸的气相色谱分析

采用ＢＦ３－ＣＨ３ＯＨ酯化衍生法,以正辛酸作内标,建立了３－羟基丁酸、巴豆酸、３羟基丁醛、巴豆醛等混合体系中３－羟基丁酸的气相色谱分析方法,利用标准样对照并结合质谱分析确定了化学合成３－羟基丁酸反应混合物的组成。该法线性范围为０．４０～１６０．６７ｇ／Ｌ,相关系数为ｒ＝０．９９９５。方法快速、简单、重现性好,并用于化学合成３－羟基丁酸反应混合物的分析,结果令人满意。     

原位合成分子筛多孔层毛细管柱的制备与性能考察

在毛细管内壁,原位合成了Ｎａ－Ａ型分子筛,成功制备出一类新型分子筛多孔尾毛细管柱。和涂渍相比,原位合成法在毛细管内壁形成的分子筛层更加均匀、致密度、更能体现出分子筛对低碳烃的分离特性,实验表明用超短毛细管柱即可对低碳烃进行良好的分离。     

确定金属酶及模拟络合物中金属离子氧化态的一种方法——键价和分析

在生物化学领域中弄清金属酶活性中心的结构和氧化态是至关重要的。“键价和分析”是根据金属 配体键长数据确定固体中金属离子氧化态的一种方便可行的方法 ,它已用于金属蛋白、金属酶以及高温超导体中金属氧化态的指派。本文拟介绍该方法的要点及其实际应用。     

DBC-偶氮肿-锇-溴酸钾催化光度法测定微量锇

酸性介质中Os(Ⅳ)对溴酸钾氧化DBC-偶氮肿的褪色反应有明显的催化作用,据此反应建立了微量娥的催化光度分析法,锇在1.0-20.0μg·L-1符合比耳定律.反应在水相中进行,灵敏度高,简便快速,用于贵金属精矿中娥的测定,结果满意.     

Nd: YAG激光烧蚀裂解加工技术模拟分析与实验研究

激光裂解技术能够极大改善发动机缸体主轴承座的加工质量并显著提高加工效率. 为探寻Nd:YAG激光烧蚀球墨铸铁材料裂解槽的裂解性能, 本文基于有限元法成功构建了发动机缸体主轴承座激光裂解加工过程仿真模型, 针对QT500-7球墨铸铁主轴承座的裂解参数进行了仿真分析. 研究结果表明: 在影响裂解质量的三个裂解槽几何参数中, 槽深较张角及曲率半径对裂解载荷的影响效应更为明显; 裂解载荷随槽深的增加而迅速降低, 随槽张角和曲率半径的增加而升高; QT500-7球墨铸铁发动机缸体主轴承座激光裂解加工优化参数应为裂解槽深选为0.5 mm, 裂解槽张角选为60^o, 裂解槽半径选为0.2 mm. 有限元模拟分析结果得到了单向拉伸实验结果的验证. 本工作通过ABAQUS仿真模拟及大量裂解载荷试验确立了裂解槽几何形状的优化参数, 为显著降低裂解载荷和优化裂解工艺提供了数值参考, 有利于实现发动机缸体加工的快速发展, 从而促进汽车工业实现绿色制造.     

大面积染料敏化太阳电池的串联阻抗特性研究

在电子扩散微分方程的基础上,研究了染料敏化太阳电池光生电流和光生电压随光照强度不同的变化关系.提出敏化太阳电池串联阻抗功率损耗模型,理论模拟了大面积电池（有效面积>1 cm²）光电转换效率随多孔薄膜有效面积宽度变化的曲线、透明导电基底膜与银栅极的比接触电阻以及在不同入射光强下银栅极体电阻对大面积染料敏化太阳电池光伏性能的影响.结果表明透明导电基底膜的方块电阻和银栅极体电阻对大面积染料敏化太阳电池的性能有很大影响,而这种影响随光强的减弱逐渐减小. 关键词： 染料敏化 太阳电池 串联阻抗 光电转换效率     

Fluorescence Turn-On Analysis of Trace Protein Based on Carbon Nanodots and Hybridization Chain Reaction

In this work, an ultrasensitive method for trace protein detection based on fluorescent carbon nanodots and hybridization chain reaction (HCR) is designed. Generally, the synthesized bright carbon nanodots are conjugated with two hairpin-structured DNA probes, respectively, which act as subsequent HCR fuel strands. Since single-stranded parts of DNA probes could be easily absorbed on graphene oxide (GO) nanosheets, fluorescence emission of carbon nanodots is effectively quenched via fluorescence resonance energy transfer. However, in the presence of target protein, the aptamer sequence in another hairpin-structured DNA probe specially interacts with target and the hairpin is opened. A single-stranded region is thus exposed, which initiates HCR by coupling with the DNA fuel strands on carbon nanodots. The formed HCR product displays a rigid, long double-stranded structure, which facilitates the release of carbon nanodots from GO surface. As a result, fluorescence of carbon nanodots is recovered and initial concentration of target protein can be estimated. This protein detection method shows a favorable linear response with a low limit of detection (2.3 fg mL⁻¹). Furthermore, it is highly selective and capable of detecting target in biological fluids like serum samples, which demonstrates the promising applications of this method.     

Sixth-order variants of Chebyshev–Halley methods for solving non-linear equations

In this paper, we present a family of new variants of Chebyshev–Halley methods with sixth-order convergence. Compared with Chebyshev–Halley methods, the new methods require one additional evaluation of the function. The numerical results presented show that the new methods compete with Chebyshev–Halley methods.     

CombinedB → X s Ψ andB → X s ν c decays as a test of factorization

We calculate the inclusive decaysB → X _s Ψ andB → X _s ν _c using factorization assumption. To investigate the bound state effect of the decaying B meson in these inclusive decays we take into account the motion of theb quark using a Gaussian momentum distribution model. The resulting correction to free quark decay approximation is around 6% at most. Utilizing a potential model evaluation of the ratio of the decay constantsf _νc ²/f _Ψ ², it is shown that the ratioR = Γ(B → X _sν_c)/Γ(B → X_sΨ) can be used a possible test of factorization assumption.     

碘冉酸阴离子桥联双核铜（Ⅱ）配合物的合成与磁性

碘冉酸阴离子桥联双核铜（Ⅱ）配合物的合成与磁性孟祥军寇会忠邹国彰廖代正姜宗慧＊王耕霖（南开大学化学系天津３０００７１）关键词碘冉酸，Ｃｕ（Ⅱ），双核配合物，合成，磁性１９９６－０８－２０收稿，１９９６－１１－１８修回国家自然科学基金资助项目随着生物无...