Synthesis and laser patterning of Bi-doped Y3Fe5O12 crystals in germanosilicate glasses

New germanosilicate glasses giving the crystallization of yttrium iron garnet Y₃Fe₅O₁₂ (YIG) and Bi-doped YIG, 23Na₂O-xBi₂O₃-(12−x)Y₂O₃-25Fe₂O₃-20SiO₂-20GeO₂ (mol%), are developed, and the laser-induced crystallization technique is applied to the glasses to pattern YIG and Bi-doped YIG crystals on the glass surface. It is clarified from the Mössbauer effect measurements that iron ions in the glasses are present mainly as Fe³⁺. It is suggested from the X-ray diffraction analyses and magnetization measurements that Si⁴⁺ ions are incorporated into YIG crystals formed in the crystallization of glasses. The irradiations (laser power: 32-60 mW and laser scanning speed: 7 μm/s) of continuous wave Yb:YVO₄ fiber laser (wavelength: 1080 nm) are found to induce YIG and Bi-doped YIG crystals, indicating that Fe³⁺ ions in the glasses act as suitable transition metal ions for the laser-induced crystallization. It is suggested that YIG and Bi-doped YIG crystals in the laser irradiated part might orient. The present study will be a first step for the patterning of magnetic crystals containing iron ions in glasses.     

Ni-P alloy-carbon black composite films fabricated by electrodeposition

Ni-P alloy-carbon black (CB) composite films were fabricated by electroplating and their microstructures and properties were examined. The CB and phosphorus contents of the composite films were also investigated. The CB particles were found to be embedded in the Ni-P alloy matrix. The CB content in the deposits increased, reached a maximum value of 0.77 mass% with increasing CB concentration in the bath up to 10 g dm⁻³, and then decreased with a further increase in the CB concentration in the bath. Both before and after heat treatment, the composite films had higher hardnesses and lower friction coefficients than the Ni-P alloy films. Both before and after heat treatment, the friction coefficient of 0.77 mass% CB composite films was about half that of Ni-P alloy films without CB.     

Interaction of bathocuproine with metals (Ca, Mg, Al, Ag, and Au) studied by density functional theory

Electronic structure of the interface between a bathocuproine (BCP) molecule and metal surface was studied by density functional theory. The bond energy of BCP with metal surface increased with decreasing work function of metals, that is, Au, Ag, Al, Mg, and Ca in this order. The charge transfer also increased with decreasing metal work function. It was analyzed that the Fermi level and the lowest unoccupied molecular orbital of BCP are composed of both BCP and metal orbital component, and electron transport properties across the BCP and metal is discussed based on these analyses.     

Controlling the orientation of polar molecules with combined electrostatic and pulsed,nonresonant laser fields

We demonstrate that molecules with a moderate permanent dipole moment can be oriented with combined electrostatic and pulsed, nonresonant laser fields. We use OCS molecules as a sample. The degree of orientation can be increased by increasing the magnitude of electrostatic field and the peak intensity of the laser field or by decreasing the rotational temperature of the molecules.     

Reduction of ion thermal diffusivity associated with the transition of the radial electric field in neutral-beam-heated plasmas in the large helical device

Recent large helical device experiments revealed that the transition from ion root to electron root occurred for the first time in neutral-beam-heated discharges, where no nonthermal electrons exist. The measured values of the radial electric field were found to be in qualitative agreement with those estimated by neoclassical theory. A clear reduction of ion thermal diffusivity was observed after the mode transition from ion root to electron root as predicted by neoclassical theory when the neoclassical ion loss is more dominant than the anomalous ion loss.     

FDTD simulation of wavelength conversion of ultrashort pulses utilizing intersubband absorption in AlGaN/GaN quantum wells

The four-wave mixing (FWM) characteristics of 500-fs pulses in nonlinear optical waveguides utilizing the saturation of the intersubband absorption at 1.55 μm in nitride multiple quantum wells are calculated by a one-dimensional finite-difference time-domain (FDTD) method combined with three-level rate equations describing the intersubband carrier dynamics. Efficiency for a 100-nm wavelength conversion in a 160-μm waveguide is predicted to be higher than 3% both for up- and down-conversions. The extinction ratio is higher than 20 dB. As for the short-pulse application, however, the conversion efficiency is strongly dependent on the phase difference between the pump and signal pulses, especially when the efficiency is high. This causes ambiguity in the output power. Therefore, the cross-loss-modulation (XLM) converter is preferable to the FWM converter for OTDM application. The FWM converters are considered to be applicable to simultaneous conversion of WDM signals.     

Observation of the "self-healing" of an error field island in the large helical device

It was observed that the vacuum magnetic island produced by an external error magnetic field in the large helical device shrank in the presence of plasma. This was evidenced by the disappearance of flat regions in the electron temperature profile obtained by Thomson scattering. This island behavior depended on the magnetic configuration in which the plasmas were produced.     

First-Principles Calculation of Lattice Dynamics of bcc and hcp Iron Under High Pressures

Lattice dynamics and electron-phonon coupling are calculated for non-magnetic hcp iron at 100 GPa by a first-principles linear response full-potential LMTO method. Superconducting transition temperature is estimated to be less than 0.5 K. For ferromagnetic bcc iron lattice dynamical calculations are performed for 9.8 GPa as well as for ambient pressure. The results of calculation reproduce well the pressure dependence of phonon dispersion curves observed by neutron scattering measurements.     

Combined effects of high pressure and sodium hydrogen carbonate treatment on pork ham: improvement of texture and palatability

In this study, the combined effects of high pressure and sodium hydrogen carbonate (NaHCO₃) treatment on the physical and chemical properties, and palatability of pork ham, a tough and under-utilized meat, were investigated. Assessment of meat properties with heat treatment, after exposure to NaHCO₃ and high pressure treatment, revealed an increase in water content, and decreased weight reduction and rupture stress. The free amino acid content of meat samples increased with NaHCO₃ and high pressure treatment. The effect of high pressure processing was especially notable at a pressure of 300 MPa. Sensory evaluation showed that meat subjected to high pressure processing after NaHCO₃ treatment was tender and juicy. In addition, the sample produced minimal residue in the mouth and was characterized by a good taste.     

Multiwalled carbon nanotubes mass-produced by dc arc discharge in He–H2 gas mixture

Uniform cathode deposits (longer than 15 mm), containing multiwalled carbon nanotubes (MWNTs) inside, were produced by dc arc discharge evaporation with a computer-controlled feeder of a pure-carbon electrode without a metal catalyst in a He–H₂ gas mixture. The purification of MWNTs was carried out to remove amorphous carbon and carbon nanoparticles. High-resolution transmission electron microscopy observations and Raman scattering studies show that the MWNTs possess a high crystallinity and a mean outermost diameter of ∼ ∼10 nm. It has been confirmed that the current density in the electron field emission from a purified MWNT mat can reach 77.92 mA/cm², indicating that the purified MWNTs are a promising candidate electron source in a super high-luminance light-source tube or a miniature X-ray source.