Study of feed temperature control of chromatography using computional fluid dynamics simulation

Recently preparative high-performance liquid chromatography (HPLC) has been used more and more frequently to separate drugs and natural substances. However, large-scale HPLC easily tends to reduce the yield and purity of the product. Hydrodynamic and heat factors play an important roles. Generally, in a large-scale HPLC column, the tracer profile inside column will take on a parabolic shape because of the distributor, which will impact the separation performance of the column. With the inlet temperature suitably lower than the wall temperature, this situation could be improved to some extent. In this work, some experiments were conducted using HPLC, with a column 10 cm in diameter to determine the optimal temperature difference between wall and inlet temperatures. The wall temperature was fixed at about 30 degrees C and the inlet temperature varied from 15 to 30 degrees C. The flow-rate of the eluent, methanol, was 300 ml/min. The experimental result was simulated using CFD software FLUENT 4.4.4. The simulated temperature field fitted the experimental one very well and the simulated flow, temperature and tracer distribution inside column could provide good explanation of separation performance under different conditions. In addition, the simulation could at least approximately predict the optimal temperature difference.     

Comparison of denuder and impinger sampling for determination of gaseous toluene diisocyanate (TDI)

An air-sampling method employing denuders coated inside with a chemisorptive stationary phase has been evaluated for analysis of the hazardous gaseous 2,4 and 2,6 isomers of toluene diisocyanate (TDI). The denuder stationary phase consisted of polydimethylsiloxane (SE-30) to which dibutylamine (DBA) was added as a reagent for derivatization of TDI. The accuracy and precision of sampling by means of denuders were shown to differ only slightly from those of the established impinger method. The denuder method was, however, also shown to be suitable for long-term measurements (up to 8 h). The limit of determination (LOD) of the method, including LC-APCI-MS-MS analysis, was found to be 1.9 microg m(-3) and 1.2 microg m(-3) for 2,4- and 2,6-TDI, respectively, for short-term measurements (15 min). Significant lower LOD was obtained for long-term measurements. This is well below the Occupational Safety and Health Administration (OSHA) 8-h TWA (time-weighted average) exposure limit, which is 40 microg m(-3) for the sum of the TDI isomers. The denuder method was also found to be robust and easy to handle. The samplers can be prepared several days before sampling with no loss in performance. The contents of denuders should, on the other hand, be extracted immediately after sampling to prevent degradation of the isocyanate derivatives formed.     

Vibrational Spectroscopic Investigations of M(Imidazole)2Ni(CN)4·2 Dioxane Clathrates

Four new clathrates of the formula M(Im)2Ni(CN)4·2·Dioxane (where M = Co, Ni, Cu, Cd; Im = Imidazole) have been prepared in powder form and their FT-IR and laser-Raman spectra are reported for the first time. These clathrates are analogues to the previously reported classical Hofmann type clathrates except for the copper clathrate. The Cu clathrate has different spectral features in comparison with its analogues due to the Jahn-Teller effect.     

Agents for the treatment of overactive detrusor. II. Synthesis and inhibitory activity on detrusor contraction of 1,1'-biphenyl-2,6-dicarboxylic acid diesters with an aminoalkyl group in the ester function.

A series of 1,1'-biphenyl-2,6-dicarboxylic acid diesters with an aminoalkyl group in the ester function were synthesized and examined for their inhibitory activity on detrusor contraction in vitro and in vivo. In the in vivo test, arrhythmia was observed as a side effect. Among those compounds synthesized, 2-methyl 6-[4-(1-methylpiperidinyl)] 3-hydroxy-5-methyl-2'-nitro-1,1'-biphenyl-2,6-dicarboxylate (18) showed strong inhibitory activity on detrusor contractions in vivo (ED50 = 0.54 mg/kg i.v., ED50 = 7.2mg/kg i.d.) and good separation from the side effect. Compound 18 was chosen for further pharmacological evaluation as an agent for the treatment of overactive detrusor.     

Solvent release upon ion association from entropy data

The translational entropy loss on the association of two ions to form an ion pair or 11 complex is overcompensated by a rotational entropy gain, an electrostatic entropy gain, and an entropy gain due to solvent release from translational immobilization. The first three effects can be calculated, leaving the fourth as a difference from the experimental entropy change on association. The ratio of the solvent release entropy gain to the entropy change on melting of the solvent indicates the number of solvent molecules released on the association. A similar value is obtained from data for the volume change on association.Presented as a poster at the 10th International Conference on Non-Aqueous Solvents (ICNAS) at Leuven, Belgium, August 1986, and at the 24th International Congress on Coordination Chemistry (ICCC) at Athens, Greece, August 1986.     

Effect of labile hydrogens on measurement of tritium preserved in hydrogens of cellulose

Various f-elements are separated as anionic complexes from both acidic and alkaline solutions by precipitation with alkylpyridinium salts. The precipitates are also cationic surfactants where the simple counter-ion (e.g. nitrate or chloride) is replaced by the negatively charged complex anion of an actinide or lanthanide. The low solubility of these precipitates is explained by a strong affinity of divalent complex counter-ions of f-elements to the quaternary nitrogen. Precipitations in solutions of nitric acid allow to separate tetravalent f-elements from other metals, in alkaline carbonate solutions tetravalent and hexavalent actinides are precipitated simultaneously. The last procedure yields precipitates, which are very intimate mixtures of hexavalent and tetravalent actinides. This allows to prepare mixed oxides in a simple way.     

The thermal reaction of HNCO at moderate temperatures

The thermal reaction of HNCO has been studied in a static cell at temperatures between 873 and 1220 K and a constant pressure of 800 torr under highly diluted conditions. The reaction was measurable above 1000 K by FTIR spectrometry. The products detected include CO, CO₂, HCN, NH₃, and the unreacted HNCO. In this moderate temperature regime, the rates of product formation and HNCO decay cannot be accounted for by a previously established high-temperature mechanism, assuming HNCO → NH + CO (1) as the initiation process. Instead, a new bimolecular reaction, 2HNCO → CO₂ + HNCNH (2), has been invoked to interpret the disappearance of HNCO as well as the formation of various products, most importantly CO₂. The concentration profiles of all measured species can be quantitatively modeled, throughout the temperature range analyzed, by varying k₂ using a modified mechanism. The kinetically modeled values of k₂ can be effectively represented by This result agrees closely with that computed with the conventional transition-state theory using the TST parameters predicted by the BAC-MP4 method: The bimolecular reaction takes place via a stable 4-membered ring intermediate which is isoelectronic with diketene; viz.      

Additional of functional vinylzinc reagents to nitrones: synthesis of (E)-N-allylhydroxylamines and their rearrangement into (E)-O-allylhydroxylamines

The vinylzinc reagents derived from hydrozirconation of alkynes and transmetallation add readily to nitrones to yield pure (E)-N-allylhydroxylamines; some of these rearrange into O-allylhydroxylamines.