Hydrolysis of 2',3'-O-methyleneadenosin-5'-yl bis-5'-O-methyluridin-3'-yl phosphate: the 2'-hydroxy group stabilizes the phosphorane intermediate, not the departing 3'-oxyanion, by hydrogen bonding

Hydrolytic reactions of 2',3'-O-methyleneadenosin-5'-yl bis-5'-O-methyluridin-3'-yl phosphate (1a) have been followed by RP HPLC over a wide pH range to elucidate the role of the 2'-OH group as an intermolecular hydrogen bond donor facilitating the cleavage of 1a. At pH < 2, where the decomposition of 1 is first-order in hydronium-ion concentration, the P-O5' and P-O3' bonds are cleaved equally rapidly. Over a relatively wide range from pH 2 to 4, the hydrolysis is pH-independent and the P-O5' bond is cleaved 1.6 times as rapidly as the P-O3' bond. At pH 6, the reaction becomes first-order in hydroxide-ion concentration and cleavage of the P-O3' bond starts to predominate, accounting for 89% of the overall hydrolysis in 10 mmol L(-)(1) aqueous sodium hydroxide. Under alkaline conditions, the 2'-OH group facilitates the cleavage of 1 by a factor of 27 compared to the 2'-OMe counterpart, the influence on the P-O3' and P-O5' bond cleavage being equal. Accordingly, the 2'-hydroxy group stabilizes the phosphorane intermediate, not the departing 3'-oxyanion, by hydrogen bonding.     

Glass-capillary gas chromatography of chlorobenzenes on SE-30 and Carbowax 20M columns. Simultaneous determination of chlorobenzenes and chlorophenols

Summary Gas chromatography of benzene and all chlorobenzenes has been studied on SE-30 and Carbowax 20M glasscapillary columns under various operating conditions. The benzene isomers are eluted on both columns according to their boiling points. Separation of all components in a mixture is achieved on Carbowax 20M, whereas on SE-30 the peaks of closely related isomers overlapped. Also one partial overlapping is observed on a non-polar phase. The relative retention times for compounds are given and the retention order is discussed. The retention behaviour of chlorobenzenes and chlorophenols is compared. By using an SE-30 quartz-capillary column a mixture of 33 individual components gives 29 resolved peaks the analysis time being less than 26 minutes. A polar column proved to be unsuitable for the separation of polychlorophenols.     

Mass spectra of chlorinated esters: 2—Methyl mono- and dichlorobutanoates

The mass spectral fragmentations of methyl mono- and dichlorobutanates have been studied. Deutrium labelling and metastable ion analysis were used to elucidate the fragmentation mechanisms. The molecular ion peaks of the esters are weak and show only in the spectra of the monochloro isomers. A McLafferty rearrangement gives the base peaks in the spectra of methyl 2-chloro-, 4-chloro- and 4,4-dichlorobutanoate; α-cleavage, [COOCH₃]⁺, in methyl 2,2- and 2,4-dichlorobutanoate; [M? Cl]⁺, in methyl 3-chlorobutanoate; [M? Cl? HCl]⁺, in methyl 3,4-dichlorobutanoate; [M? Cl? CH₂CO]⁺, in methyl 3,3-dichlorobutanoate and [M? Cl? COOCH₃]^+˙, in methyl erythro- and threo-2,3-dichlorobutanoate. The mass spectra of the stereoisomers are nearly identical, the loss of a chlorine atom and the McLafferty rearrangement giving the higher peaks in the spectrum of the threo form.     

Crosslinked poly(ester anhydride)s based on poly(ε‐caprolactone) and polylactide oligomers

Resorbable poly(ester anhydride) networks based on ε‐caprolactone, L ‐lactide, and D,L ‐lactide oligomers were synthesized. The ring‐opening polymerization of the monomers yielded hydroxyl telechelic oligomers, which were end‐functionalized with succinic anhydride and reacted with methacrylic anhydride to yield dimethacrylated oligomers containing anhydride bonds. The degree of substitution, determined by ¹³C NMR, was over 85% for acid functionalization and over 90% for methacrylation. The crosslinking of the oligomers was carried out thermally with dibenzoyl peroxide at 120 °C, leading to polymer networks with glass‐transition temperatures about 10 °C higher than those of the constituent oligomers. In vitro degradation tests, in a phosphate buffer solution (pH 7.0) at 37 °C, revealed a rapid degradation of the networks. Crosslinked polymers based on lactides exhibited high water absorption and complete mass loss in 4 days. In ε‐caprolactone‐based networks, the length of the constituent oligomer determined the degradation: PCL5‐AH, formed from longer poly(ε‐caprolactone) (PCL) blocks, lost only 40% of its mass in 2 weeks, whereas PCL10‐AH, composed of shorter PCL blocks, completely degraded in 2 days. The degradation of PCL10‐AH showed characteristics of surface erosion, as the dimensions of the specimens decreased steadily and, according to Fourier transform infrared, labile anhydride bonds were still present after 90% mass loss. © 2003 The Authors. Journal of Polymer Science Part A: Polymer Chemistry Published by Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 41: 3788–3797, 2003     

Mass spectra of halogenated esters: 8. Methyl esters of 2,3-dichloro-, bromochloro- and dibromopropenoic acids

The mass spectral fragmentation of methyl esters of E and Z isomers of 2,3-dichloro-, 2-bromo-3-chloro-, 3-bromo-2-chIoro- and 2,3-dibromopropenoic acids have been investigated. The M^+˙ peak is shown with all isomers, the [M ? OCH₃]⁺, [M ? X]⁺, [M ? OCH₃ ? CO]⁺, [M ? OCH₃ ? CO ? X]^+˙ and [M ? OCH₃ ? CO ? X ? X]⁺ ions constituting abundant peaks in all spectra. The results, particularly from the bromochloro isomers, show that a halogen atom is eliminated from the 3- rather than the 2- position and from the Z rather than the E isomer. Bromine as a bulky atom is preferentially lost.     

Porous Biodegradable Scaffold: Predetermined Porosity by Dissolution of Poly(ester‐anhydride) Fibers from Polyester Matrix

A novel selective leaching method for the porogenization of the biodegradable scaffolds was developed. Continuous, predetermined pore structure was prepared by dissolving fast eroding poly(ε‐caprolactone)‐based poly(ester‐anhydride) fibers from the photo‐crosslinked poly(ε‐caprolactone) matrix. The porogen fibers dissolved in the phosphate buffer (pH 7.4, 37 °C) within a week, resulting in the porosity that replicated exactly the single fiber dimensions and the overall arrangement of the fibers. The amount of the porosity, estimated with micro‐CT, corresponded with the initial amount of the fibers. The potential to include bioactive agents in the porogen fibers was demonstrated with the bioactive glass.

     

Hydrophobicities of poly(ε-caprolactone) oligomers functionalized with different succinic anhydrides

Different succinic anhydrides were used for modification of hydrophobicities of linear and star-shaped poly (ε-caprolactone) oligomers with different molecular weights. Hydroxyl-terminated poly(ε-caprolactone) oligomers were acid-functionalized either with succinic anhydride (SAH) or with alkenylsuccinic anhydrides (ASAs) containing 8 or 18 carbons in their alkenyl chains. Hydrophobicities of the linear and corresponding star-shaped oligomers were investigated by immersion studies and by water contact angle measurements. In comparison with SAH functionalized oligomers, alkenyl chain containing oligomers showed lower thermal transitions and higher hydrophobicities. In addition, oligomers with 18 carbons alkenyl chain showed considerably higher hydrophobicities than corresponding oligomers with 8 carbon alkenyl chain.     

Efficiency analysis to incorporate interval-scale data

We develop an approach to efficiency analysis to enable us to incorporate interval-scale data in addition to ratio-scale data. Our approach introduces a measure of inefficiency and identifies efficient units as is done in Data Envelopment Analysis. The basic idea in our approach is to find the “best” hyperplane separating the units that are better and worse than each unit. “Best” is defined in such a way that the number of not-better units is maximal. The efficiency measure is defined as a proportion of not-better units to all units. The results are invariant under a strictly increasing linear re-scaling of any input- or output-variables. Thus zeroes or negative values do not cause problems for the analysis. The approach is used to analyze the data of the research evaluation exercise recently carried out at the University of Joensuu, Finland.     

Performance of multicomponent self-organizing regression (MCSOR) in QSAR,QSPR, and multivariate calibration: comparison with partial least-squares (PLS) and validation with large external data sets

A novel method for underdetermined regression problems, multicomponent self-organizing regression (MCSOR), has been recently introduced. Here, its performance is compared with partial least-squares (PLS), which is perhaps the most widely adopted multivariate method in chemometrics. A potpourri of models is presented, and MCSOR appears to provide highly predictive models that are comparable with or better than the corresponding PLS models in large internal (leave-one-out, LOO) and pseudo-external (leave-many-out, LMO) validation tests. The “blind” external predictive ability of MCSOR and PLS is demonstrated employing large melting point, factor Xa, log?P and log?S data sets. In a nutshell, MCSOR is fast, conceptually simple (employing multiple linear regression, MLR, as a statistical tool), and applicable to all kinds of multivariate problems with single Y-variable.     

Co3O4-SiO2 nanocomposite: a very active catalyst for CO oxidation with unusual catalytic behavior

A high surface area Co(3)O(4)-SiO(2) nanocomposite catalyst has been prepared by use of activated carbon as template. The Co(3)O(4)-SiO(2) composite, the surface of which is rich in silica and Co(II) species compared with normal Co(3)O(4), exhibited very high activity for CO oxidation even at a temperature as low as -76 °C. A rather unusual temperature-dependent activity curve, with the lowest conversion at about 80 °C, was observed with a normal feed gas (H(2)O content ~3 ppm). The U-shape of the activity curve indicates a negative apparent activation energy over a certain temperature range, which has rarely been observed for the heterogeneously catalyzed oxidation of CO. Careful investigation of the catalytic behavior of Co(3)O(4)-SiO(2) catalyst led to the conclusion that adsorption of H(2)O molecules on the surface of the catalyst caused the unusual behavior. This conclusion was supported by in situ diffuse reflectance Fourier transform infrared (DRIFT) spectroscopic experiments under both normal and dry conditions.