Polypyrrole Nanospheres with Magnetic and Cell‐Targeting Capabilities

The preparation of polypyrrole/Fe₃O₄ nanospheres by a facile mini‐emulsion polymerization method is investigated using poly(ethylene glycol), poly(ethylene oxide), poly(vinyl alcohol), and hyaluronic acid as surfactants. Hyaluronic acid is deemed the most suitable surfactant since it results in well‐dispersed nanospheres of 80–100 nm, and offers the advantages of biocompatibility, cell adhesive property, and the availability of functional groups for attachment of other molecules. These polypyrrole/Fe₃O₄ nanospheres are magnetic and can be further functionalized with a cancer antibody, herceptin. Our results show that this combination of hyaluronic acid and herceptin results in high specific uptake of the nanospheres by cancer cells.

     

In Situ Synthesis and Nonvolatile Rewritable‐Memory Effect of Polyaniline‐Functionalized Graphene Oxide

A new polyaniline (PANI)‐functionalized graphene oxide (GO‐PANI) was prepared by using an in situ oxidative graft polymerization of aniline on the surface of GO. Its highest occupied molecular orbital (HOMO), lowest unoccupied molecular orbital (LUMO), ionization potential (IP), and electron affinity (EA) values experimentally estimated by the onset of the redox potentials were ?5.33, ?3.57, 5.59, and 3.83 eV, respectively. A bistable electrical‐switching effect was observed in electronic device with the GO‐PANI film sandwiched between the indium tin oxide (ITO) and Al electrodes. This device exhibited two accessible conductivity states, that is, the low‐conductivity (OFF) state and the high‐conductivity (ON) state, and can be switched to the ON state under a negative electrical sweep, and can also be reset to the initial OFF state by a reverse (positive) electrical sweep. The ON state is nonvolatile and can withstand a constant voltage stress of ?1 V for 3 h and 10⁸ read cycles at ?1 V under ambient conditions. The nonvolatile nature of the ON state and the ability to write, read, and erase the electrical states, fulfill the functionality of a rewritable memory. An ON/OFF current ratio of more than 10⁴ at ?1 V achieved in this memory device is high enough to promise a low misreading rate through the precise control of the ON and OFF states. The mechanism associated with the memory effects was elucidated from molecular simulation results.     

Chlorine substitution in poly(arylamine)s during synthesis and protonation in hydrochloric acid

The effects of varying the oxidant/monomer ratio in the polymerization of aniline, N-phenyl-p-phenylenediamine and N,N′-diphenylbenzidine in a hydrochloric acid solution of (NH₄)₂S₂O₈ were investigated. With the first two monomers, increasing the oxidant/monomer ratio from 0·3 to 3 results in a substantial increase in polymer yield but the extent of covalent bond formation between chlorine and the polymer is also increased. In addition, differences in the N/C and imine/amine ratios, and in thermal stability, are evident in the polymers synthesized at different oxidant/monomer ratios. The degree of polymerization of N,N′-diphenylbenzidine is low and it exhibits a very high susceptibility to chlorine substitution in the reaction mixture. A comparison of the extent of chlorine substitution is made among polymers synthesized in (NH₄)₂S₂O₈/HCl, and polyaniline base and aromatic amine monomers treated with HCl of the same concentration.     

Plasma-Induced Graft Polymerization of Poly(ethylene glycol) Methyl Ether Methacrylate on Si(100) Surfaces for Reduction in Protein Adsorption and Platelet Adhesion

Argon plasma-induced graft polymerization of a solution-coated macromonomer, poly(ethylene glycol) methyl ether methacrylate (PEGMA), on the Si(100) surface was carried out to impart anti-fouling properties to the Si(100) surface. The surface composition and microstructure of the PEGMA graft-polymerized Si(100) surfaces were characterized by X-ray photoelectron spectroscopy (XPS), Fourier-transform infrared spectroscopy (FTIR), and atomic force microscopy (AFM) measurements. The extent of crosslinking in the plasma-graft polymerized PEGMA (pp-PEGMA) was estimated by gel fraction determination. In general, an appropriate RF power of about 15 W and a PEGMA macromonomer concentration of about 1 wt% in the coating solution for plasma polymerization produced a high graft yield of pp-PEGMA on the Si(100) surface (the pp-PEGMA-g-Si surface). The Si(100) surface with a high concentration of the grafted pp-PEGMA was effective in preventing bovine serum albumin (BSA) adsorption and platelet adhesion.     

Reactive Graphene Oxide Nanosheets: A Versatile Platform for the Fabrication of Graphene Oxide–Biomolecule/Polymer Nanohybrids

Graphene oxide (GO) nanosheets can be functionalized with reactive pentafluorophenyl ester via esterification of the carboxylic groups. The resulting reactive GO nanosheets provide a versatile platform for grafting of amino‐containing polymers or biomolecules via ester–amine coupling. Coupling of poly[(9,9‐dioctylfluorene)‐alt‐(4‐amino‐phenylcarbazole)] (PFCz‐NH₂), amino‐terminated hyperbranched polyglycerol (HPG‐NH₂), and lysozyme (Lyz) was illustrated. The Al/GO‐g‐PFCz/ITO sandwich thin‐film device exhibits bistable electrical switching and rewritable memory effects. The GO‐g‐Lyz nanohybrids exhibit high bactericidal efficacy against S. aureus and E. coli, while the GO‐g‐HPG nanohybrids exhibit reduced cytotoxicity toward 3T3 fibroblasts.     

Antibacterial activities of surface modified electrospun poly(vinylidene fluoride-co-hexafluoropropylene) (PVDF-HFP) fibrous membranes

Poly(vinylidene fluoride-co-hexafluoropropylene) (PVDF-HFP) membrane, with its excellent chemical and mechanical properties, has good potential for broad applications. However, due to its hydrophobic nature, microbial colonization is commonly encountered. In this work, electrospun PVDF-HFP fibrous membranes were surface modified by poly(4-vinyl-N-alkylpyridinium bromide) to achieve antibacterial activities. The membranes were first subjected to plasma pretreatment followed by UV-induced surface graft copolymerization of 4-vinylpyridine (4VP) and quaternization of the grafted pyridine groups with hexylbromide. The chemical composition of the surface modified PVDF-HFP electrospun membranes was studied by X-ray photoelectron spectroscopy (XPS). The morphology and mechanical properties of pristine and surface modified PVDF-HFP fibrous membranes were characterized by scanning electron microscopy (SEM) and tensile test, respectively. The antibacterial activities of the modified electrospun PVDF-HFP fibrous membranes were assessed against Gram-positive Staphylococcus aureus (S. aureus) and Gram-negative Escherichia coli (E. coli). The results showed that the PVDF-HFP fibrous membranes modified with quaternized pyridinium groups are highly effective against both bacteria with killing efficiency as high as 99.9999%.     

Branched fluoropolymer-Si hybrids via surface-initiated ATRP of pentafluorostyrene on hydrogen-terminated Si(100) surfaces

Linear, branched, and arborescent fluoropolymer-Si hybrids were prepared via surface-initiated atom transfer radical polymerization (ATRP) from the 4-vinylbenzyl chloride (VBC) inimer and ClSO(3)H-modified VBC that were immobilized on hydrogen-terminated Si(100), or Si-H, surfaces. The simple approach of UV-induced coupling of VBC with the Si-H surface provided a stable, Si-C bonded monolayer of "monofunctional" ATRP initiators (the Si-VBC surface). The aromatic rings of the Si-VBC surface were then sulfonated by ClSO(3)H to introduce sulfonyl chloride (-SO(2)Cl) groups and to give rise to a monolayer of "bifunctional" ATRP initiators. Kinetics study indicated that the chain growth of poly(pentafluorostyrene) from the functionalized silicon surfaces was consistent with a "controlled" or "living" process. The chemical composition and functionality of the silicon surface were tailored by the well-defined linear and branched fluoropolymer brushes. Atomic force microscopy images revealed that the surface-initiated ATRP of pentafluorostyrene (PFS) had proceeded uniformly on the Si-VBC surface to give rise to a dense and molecularly flat surface coverage of the linear brushes. The uniformity of surfaces with branched brushes was controlled by varying the feed ratio of the monomer and inimer (VBC in the present case). The living chain ends on the functionalized silicon surfaces were used as the macroinitiators for the synthesis of diblock copolymer brushes, consisting of the PFS and methyl methacrylate polymer blocks.     

Encapsulation and Release Characteristics of Carbon Dioxide in α-Cyclodextrin

Encapsulation and release of carbon dioxide (CO₂) into and from α-cyclodextrin (α-CD) was studied. Initial moisture content of α-CD and CO₂ pressure were found to have affected the encapsulation behavior. The increase of CO₂ pressure has constantly accelerated the encapsulation rates and increased the maximum inclusion ratio, whereas the increase of initial moisture content showed no consistent effect. The saturated α-CD solution produced the inclusion complex crystal of similar inclusion ratio to solid α-CD. The release characteristics of inclusion complexes were also monitored at various relative humidities at 25 °C. Predominantly, increase in storage humidity accelerated the release of CO₂. The inclusion complex crystal prepared from saturated α-CD solution showed the most stable release characteristic at all storage humidities investigated. The encapsulation and the release characteristics were analyzed using the first-order reaction equation and the Avrami’s equation respectively, in order to estimate the rate processes of encapsulation and release. The FT-IR spectra of inclusion complexes presented an absorption band at wavenumber around 2338 cm⁻¹, indicating CO₂ molecules resided inside the α-CD cavities in gaseous state rather than being bound to the hydroxyl groups of α-CD. Powder X-ray diffractometry was carried out to investigate the crystal lattice structure of α-CD and inclusion complexes. Scanning electron microscopy was also performed for morphological examination.     

Functional and surface-active membranes from poly(vinylidene fluoride)-graft-poly(acrylic acid) prepared via RAFT-mediated graft copolymerization

Poly (vinylidene fluoride) (PVDF) with "living" poly (acrylic acid) (PAAc) side chains (PVDF-g-PAAc) was prepared by reversible addition-fragmentation chain transfer (RAFT)-mediated graft copolymerization of acrylic acid (AAc) with the ozone-pretreated PVDF. The chemical composition and structure of the copolymers were characterized by elemental analysis, Fourier transform infrared spectroscopy, and thermogravimetric analysis. The copolymer could be readily cast into pH-sensitive microfiltration (MF) membranes with enriched living PAAc graft chains on the surface (including the pore surfaces) by phase inversion in an aqueous medium. The surface composition of the membranes was determined by X-ray photoelectron spectroscopy. The morphology of the membranes was characterized by scanning electron microscopy. The pore size distribution of the membranes was found to be much more uniform than that of the corresponding membranes cast from PVDF-g-PAAc prepared by the "conventional" free-radical graft copolymerization process. Most important of all, the MF membranes with surface-tethered PAAc macro chain transfer agents, or the living membrane surfaces, could be further functionalized via surface-initiated block copolymerization with N-isopropylacrylamide (NIPAAM) to obtain the PVDF-g-PAAc-b-PNIPAAM MF membranes, which exhibited both pH- and temperature-dependent permeability to aqueous media.     

Three-dimensionally ordered porous membranes prepared via self-assembly and reverse micelle formation from well-defined amphiphilic block copolymers

Block copolymers of poly(pentafluorostyrene) (PFS) and poly(tert-butyl acrylate) (PtBA), or PFS-b-PtBA copolymers, were synthesized via consecutive atom transfer radical polymerizations (ATRPs). Amphiphilic block copolymers of PFS and poly(acrylic acid) (PFS-b-PAAC copolymers) were prepared via hydrolysis of the corresponding PFS-b-PtBA copolymers. The chemical structure and composition of the PFS-b-PtBA and PFS-b-PAAC block copolymers were studied by nuclear magnetic resonance (NMR) spectroscopy, themogravimetric analysis (TGA), and X-ray photoelectron spectroscopy (XPS). The amphiphilic PFS-b-PAAC copolymers were cast into porous membranes by phase inversion in aqueous media. The surface and cross-sectional morphology of the PFS-b-PAAC membranes were studied by scanning electron microscopy (SEM). Membranes with well-defined pores of sizes in the micrometer range were obtained as a result of inverse micelle formation. The pH of the aqueous media for phase inversion and the PAAC content in the PFS-b-PAAC copolymers could be used to adjust the pore size of the membranes.