The system Na2CO3–CaCO3–MgCO3 at 6 GPa and 900–1250°C and its relation to the partial melting of carbonated mantle

In order to constrain the Na₂CO₃–CaCO₃–MgCO₃ T–X diagram at 6?GPa in addition to the binary and pseudo-binary systems we conducted experiments along the Na₂CO₃–Ca_0.5Mg_0.5CO₃ join. At 900–1000°C, melting does not occur and isothermal sections are presented by one-, two- and three-phase regions containing Ca-bearing magnesite, aragonite, Na₂CO₃ (Na₂) and Na₂(Ca_1–0.9Mg_0-0.1)_3-4(CO₃)_4-5 (Na₂Ca_3-4), Na₄(Ca_1–0.6Mg_0–0.4)(CO₃)₃ (Na₄Ca), Na₂(Ca_0-0.08Mg_1–0.92)(CO₃)₂ (Na₂Mg) phases with intermediate compositions. The minimum melting point locates between 1000°C and 1100°C. This point would resemble that of three eutectics: Mgs–Na₂Ca₃–Na₂Mg, Na₂Mg–Na₂Ca₃–Na₄Ca or Na₂Mg–Na₄Ca–Na₂, in the compositional interval of [45Na₂CO₃·55(Ca_0.6Mg_0.4)CO₃]–[60Na₂CO₃·40Ca_0.6Mg_0.4CO₃]. The liquidus projection has seven primary solidification phase regions for Mgs, Dol, Arg, Na₂Ca₃, Na₄Ca, Na₂ and Na₂Mg. The results suggest that extraction of Na and Ca from silicate to carbonate components has to decrease minimum melting temperature of carbonated mantle rocks to 1000–1100°C at 6?GPa and yields Na-rich dolomitic melt with a Na# (Na₂O/(Na₂O?+?CaO?+?MgO))?≥?28?mol%.     

Synthesis and Investigation of Advanced Energetic Materials Based on Bispyrazolylmethanes

Herein we present the preparation and characterization of three new bispyrazolyl‐based energetic compounds with great potential as explosive materials. The reaction of sodium 4‐amino‐3,5‐dinitropyrazolate ( 5 ) with dimethyl iodide yielded bis(4‐amino‐3,5‐dinitropyrazolyl)methane ( 6 ), which is a secondary explosive with high heat resistance (T_dec=310 °C). The oxidation of this compound afforded bis(3,4,5‐trinitropyrazolyl)methane ( 7 ), which is a combined nitrogen‐ and oxygen‐rich secondary explosive with very high theoretical and estimated experimental detonation performance (V_det (theor)=9304 m s^?1 versus V_det(exp)=9910 m s^?1) in the range of that of CL‐20. Also, the thermal stability (T_dec=205 °C) and sensitivities of 7 are auspicious. The reaction of 6 with in situ generated nitrous acid yielded the primary explosive bis(4‐diazo‐5‐nitro‐3‐oxopyrazolyl)methane ( 8 ), which showed superior properties to those of currently used diazodinitrophenol (DDNP).     

(Amidomethyl)dimethylsilanol hydrohalides: Synthesis, NMR and IR studies. Characteristic features of the electronic structure from high-resolution X-ray study and quantum chemical calculation

(C,O)-chelate silanol hydrohalides RC(O)NHCH₂SiMe₂OH · HHal (2a,b and 5b), and their precursors, (C,O)-chelate chlorosilanes RC(O)NHCH₂SiMe₂Cl (6a,b) and disiloxanes [RC(O)NHCH₂SiMe₂]₂O (8a,b) (R = Me (a), Ph (b); Hal = Cl (2), Br (5)), were obtained by several routes. The original scheme of hydrolysis of the above chlorides was discussed in detail. X-ray analysis has shown that the silanol hydrohalogenides PhC(O)NHCH₂SiMe₂OH · HX (2b and 5b) in the crystal exist in the form of cation-anion pairs [PhC(O)NHCH₂SiMe₂(OH₂)]⁺ · X⁻ (14b · Cl⁻ and 14b · Br⁻) assembled by H-bonds in a 3D framework. The Si atom in the cation has a trigonal bipyramidal configuration with the oxygen atom of the carbonyl group and protonated hydroxyl exo-substituent in axial positions. The endocyclic Si-O bonds are equal with an average of 1.905 Å while the exocyclic Si-O bonds are 1.979 and 2.009 Å, for Hal = Cl and Br, respectively.Quantum chemical calculations have shown that the cation [PhC(O)NHCH₂SiMe₂(OH₂)]⁺ (14b) is stable only in the crystal. Based on a high-resolution X-ray study and a quantum chemical calculation, it was found that the chemical bonding pattern in the OSiO axial fragment of the cation 14b corresponds to a three-centred four electron interaction. The cation 14b should be considered as a silylium cation stabilized by coordinated H₂O molecules rather than a silyloxonium ion.     

Influence of pressure and temperature on the physico-chemical properties of mobile phase mixtures commonly used in high-performance liquid chromatography

To fulfil the increasing demand for faster and more complex separations, modern HPLC separations are performed at ever higher pressures and temperatures. Under these operating conditions, it is no longer possible to safely assume the mobile phase fluid properties to be invariable of the governing pressures and temperatures, without this resulting in significantly deficient results. A detailed insight in the influence of pressure and temperature on the physico-chemical properties of the most commonly used liquid mobile phases: water-methanol and water-acetonitrile mixtures, therefore becomes very timely. Viscosity, isothermal compressibility and density were measured for pressures up to 1000 bar and temperatures up to 100 degrees C for the entire range of water-methanol and water-acetonitrile mixtures. The paper reports on two different viscosity values: apparent and real viscosities. The apparent viscosities represent the apparent flow resistance under high pressure referred to by the flow rates measured at atmospheric pressure. They are of great practical use, because the flow rates at atmospheric pressure are commonly stable and more easily measurable in a chromatographic setup. The real viscosities are those complying with the physical definition of viscosity and they are important from a fundamental point of view. By measuring the isothermal compressibility, the actual volumetric flow rates at elevated pressures and temperatures can be calculated. The viscosities corresponding to these flow rates are the real viscosities of the solvent under the given elevated pressure and temperature. The measurements agree very well with existing literature data, which mainly focus on pure water, methanol and acetonitrile and are only available for a limited range of temperatures and pressures. As a consequence, the physico-chemical properties reported on in this paper provide a significant extension to the range of data available, hereby providing useful data to practical as well as theoretical chromatographers investigating the limits of modern day HPLC.     

Remarkable effect of the preparation technique on the state of cobalt ions in BEA zeolites evidenced by FTIR spectroscopy of adsorbed CO and NO, TPR and XRD

The state of cobalt in two BEA zeolites was studied by XRD, TPR, and FTIR spectroscopy using CO and NO as probe molecules. One of the samples, CoAlBEA (0.4 wt % of Co), was prepared by conventional ion exchange and the other, CoSiBEA (0.7 wt % Co), by a two-step postsynthesis method involving dealuminated SiBEA zeolite. The introduction of Co into SiBEA leads to an increase of unit cell parameters of the BEA structure and to the consumption of silanol groups in vacant T-sites of the dealuminated zeolite. In contrast, no structural changes are observed after incorporation of cobalt into AlBEA by ion-exchange. The reduction temperature of cobalt in CoSiBEA zeolite (1130 K), is much higher than for CoAlBEA and indicates a strong interaction of cobalt ions with SiBEA. Low-temperature CO adsorption on CoAlBEA results in (i) H-bonded CO, (ii) Co(3+)-CO adducts (2,208 cm(-1)) and (iii) a small amount of Co(2+)-CO complexes (2,188 cm(-1)). In agreement with these results, NO adsorption leads to the appearance of (i) NO(+) (2,133 cm(-1), formed with the participation of the zeolite acidic hydroxyls), (ii) Co(3+)-NO (1932 cm(-1)), and (iii) a small amount of Co(2+)(NO)(2) dinitrosyls (nu(s) = 1,898 and nu(as) = 1,814 cm(-1)). Low-temperature CO adsorption on CoSiBEA leads to formation of two kinds of Co(2+)-CO adducts (2,185 and 2,178 cm(-1)). No Co(3+) cations are detected. In line with these results, adsorption of NO reveals the existence of two kinds of Co(2+)(NO)(2) dinitrosyls (nu(s) = 1,888 and nu(as) = 1,808 cm(-1) and nu(s) = 1,878 and nu(as) = 1,799 cm(-1), respectively).     

Use of the filter diagonalization method in the study of space charge related frequency modulation in Fourier transform ion cyclotron resonance mass spectrometry

The filter diagonalization method (FDM) is a recently developed computational technique capable of extracting resonance frequencies and amplitudes from very short transient signals. Although it requires stable resonance frequencies and is slower than the fast Fourier transform (FFT), FDM has a resolution and accuracy that is unmatched by the FFT or any other comparable techniques. This unique feature of FDM makes it an ideal tool for tracing space charge induced frequency modulations in Fourier transform ion cyclotron resonance (FT-ICR) cells, which are shown to reach +/-400 ppm even for such simple spectra as Substance P.     

FTIR spectroscopy study of CO adsorption on Pt-Na-mordenite

Different carbonyls are formed after CO adsorption at ambient temperature on a Pt-Na-mordenite (Pt-Na-MOR) sample. Pt(3+)(CO)(2) dicarbonyls (nu(s) at 2205 cm(-1) and nu(as) at 2167 cm(-1)) are decomposed without formation of monocarbonyls. The respective mixed-ligand species, Pt(3+)((12)CO)((13)CO), formed after (12)CO-(13)CO coadsorption, display bands at 2192 and 2131 cm(-1), in excellent agreement with the theoretically calculated values. Pt(2+)-CO species absorb at 2145 cm(-1) and are not able to accept a second CO molecule. Pt(+)-CO carbonyls are characterized by a band at 2111 cm(-1). Under CO equilibrium pressure, these species are converted into dicarbonyls (nu(s) at 2135 cm(-1) and nu(as) at 2101 cm(-1)). The respective mixed-ligand species, Pt(+)((12)CO)((13)CO), manifest bands at 2123 and 2069 cm(-1), in good agreement again with the theory. Different carbonyls of metallic platinum are observed below 2100 cm(-)(1). In addition, weakly adsorbed CO was registered as Na(+)-CO complexes (2177 and 2165 cm(-1)) and Na(+)-OC-Na(+) species (2138 cm(-1)). It was found that during desorption of CO platinum was reduced, ultimately to metal. However, heating in a NO + O(2) mixture leads to reoxidation of the metal particles and restoration of the initial state of the sample.     

Kinetics of the CH2Cl + CH3 and CHCl2 + CH3 radical-radical reactions

The CH2Cl + CH3 (1) and CHCl2 + CH3 (2) cross-radical reactions were studied by laser photolysis/photoionization mass spectroscopy. Overall rate constants were obtained in direct real-time experiments in the temperature region 301-800 K and bath gas (helium) density (6-12) x 10(16) atom cm(-3). The observed rate constant of reaction 1 can be represented by an Arrhenius expression k1 = 3.93 x 10(-11) exp(91 K/T) cm3 molecule(-1) s(-1) (+/-25%) or as an average temperature-independent value of k1= (4.8 +/- 0.7) x 10(-11) cm3 molecule(-1) s(-1). The rate constant of reaction 2 can be expressed as k2= 1.66 x 10(-11) exp(359 K/T) cm3 molecule(-1) s(-1) (+/-25%). C2H4 and C2H3Cl were detected as the primary products of reactions 1 and 2, respectively. The experimental values of the rate constant are in reasonable agreement with the prediction based on the "geometric mean rule." A separate experimental attempt to determine the rate constants of the high-temperature CH2Cl + O2 (10) and CHCl2 + O2 (11) reaction resulted in an upper limit of 1.2 x 10(-16) cm(3) molecule(-1) s(-1) for k10 and k11 at 800 K.     

Structural Studies and Anticancer Activity of a Novel Class of β‐Peptides

Functionalized oligomeric organic compounds with well‐defined β‐proline scaffold have been synthesized by a cycloadditive oligomerization approach in racemic and enantiopure forms. The structure of the novel β‐peptides was investigated by NMR spectroscopic and X‐ray methods determining the conformational shapes of the β‐proline oligomers in solution and solid states. The main structural elements subject to conformational switches are β‐peptide bonds between 5‐arylpyrrolidine‐2‐carboxylic acid units existing in Z/E configurations. The whole library of short β‐peptides and intermediate acrylamides has been tested on antiproliferative activity towards the hormone‐refractory prostate cancer cell line PC‐3 revealing several oligomeric compounds with low micromolar and submicromolar activities. Bromine‐substituted dimeric and trimeric acrylamides induced caspase‐dependent apoptosis of PC‐3 cells through cell‐cycle arrest and mitochondrial damage.