Straightforward synthesis of fucoxanthin short-chain derivatives via modified-Julia olefination

Fucoxanthin is an essential pigment for the light-harvesting of aquatic algae. It exhibits high energy transfer efficiencies to Chl a (>80%) as well as peridinin (>95%). In order to verify the generality and specificity of the noticeable observation on the ICT excited energy state character, which was found in the study of peridinin, we achieved the straightforward synthesis of a series of fucoxanthin short-chain derivatives via the modified-Julia olefination with the aldehyde half segment possessing a β,γ-epoxyketone function. The established method was successfully applied to the synthesis of the epoxy olefin derivative as an allene modified fucoxanthin analogue.     

Near‐Infrared‐III‐Absorbing and ‐Emitting Dyes: Energy‐Gap Engineering of Expanded Porphyrinoids via Metallation

The synthesis of organometallic complexes of modified 26π‐conjugated hexaphyrins with absorption and emission capabilities in the third near‐infrared region (NIR‐III) is described. Symmetry alteration of the frontier molecular orbitals (MOs) of bis‐Pd^II and bis‐Pt^II complexes of hexaphyrin via N‐confusion modification led to substantial metal d_π–p_π interactions. This MO mixing, in turn, resulted in a significantly narrower HOMO–LUMO energy gap. A remarkable long‐wavelength shift of the lowest S₀→S₁ absorption beyond 1700 nm was achieved with the bis‐Pt^II complex, t ‐Pt₂‐3 . The emergence of photoacoustic (PA) signals maximized at 1700 nm makes t ‐Pt₂‐3 potentially useful as a NIR‐III PA contrast agent. The rigid bis‐Pd^II complexes, t ‐Pd₂‐3 and c ‐Pd₂‐3 , are rare examples of NIR emitters beyond 1500 nm. The current study provides new insight into the design of stable, expanded porphyrinic dyes possessing NIR‐III‐emissive and photoacoustic‐response capabilities.     

A 3‐Pyridyl‐5,15‐Diazaporphyrin Nickel(II) Complex as a Bidentate Metalloligand for Transition Metals

3‐Pyridyl‐5,15‐diazaporphyrin nickel(II) serves as a bidentate metalloligand for platinum(II), ruthenium(II), and rhenium(I) metal centers. Single‐crystal X‐ray diffraction analysis of these metal complexes unambiguously reveals the presence of a dative bond between the outer metal center and the meso‐nitrogen atom. The UV/Vis absorption spectra of the complexes show substantially red‐shifted bands which are perturbed by outer‐metal coordination. This is due to the contribution of metal‐to‐ligand charge transfer interactions.     

Preparation and electrical conductivity of LISICON thin films

LISICON thin films have been prepared with RF sputtering and subsequent heat-treatment. The crystal phases of sputtered films depend on the sputtering conditions, especially the target composition and ambient gas atmosphere. Though the as-sputtered films in Ar-O₂ mixed gas (target composition: Li₃Zn_0.5GeO₄+0.5 ZnO, gas pressure: 9×10^-2 Torr, oxygen gas content: 74.6%) were amorphous; LISICON single phase thin films were obtained after annealing at 600°C for 6 h. The conductivity of the film at 500°C is 5×10^-3ω^-1cm^-1 which is slightly lower than that for ceramic Li₃Zn_0.5GeO₄.     

Properties of TiO2-polyacrylic acid dispersions with potential for molecular recognition

Titanium dioxide (TiO₂)/polyacrylic acid (PAA) (TiO₂/PAA) particles were formed by mixing PAA and an acidic solution of TiO₂ nanoparticles in dimethylformamide (DMF) followed by heat treatment. TEM and particle analysis showed that the resulting particles had a narrow size distribution. The colloid was very stable and aggregation was not observed over a wide pH range (3–9) or at high salt concentration. The residual carboxylic acid of PAA could be modified via EDC/NHS activation to form an amide bond with a protein. An antibody was attached to the hybrid nanoparticle and specific binding to antigen was monitored by surface plasmon resonance. The results suggest that TiO₂/PAA nanoparticles are candidates as the base component of a photocatalytic system with potential for substrate selectivity.     

Reconfigurable Photonic Crystal Reversibly Exhibiting Single and Double Structural Colors

Unlike absorption-based colors of dyes and pigments, reflection-based colors of photonic crystals, so called “structural colors”, are responsive to external stimuli, but can remain unfaded for over ten million years, and therefore regarded as a next-generation coloring mechanism. However, it is a challenge to rationally design the spectra of structural colors, where one structure gives only one reflection peak defined by Bragg's law, unlike those of absorption-based colors. Here, we report a reconfigurable photonic crystal that exhibits single-peak and double-peak structural colors. This photonic crystal is composed of a colloidal nanosheet in water, which spontaneously adopts a layered structure with single periodicity (407 nm). After a temperature-gradient treatment, the photonic crystal segregates into two regions with shrunken (385 nm) and expanded (448 nm) periodicities, and thus exhibits double reflection peaks that are blue- and red-shifted from the original one, respectively. Notably, the transition between the single-peak and double-peak states is reversible.     

Preparation of composite monoliths of quaternized chitosan and diatom earth for protein separation

In this study, composite monoliths with porous structures were prepared using quaternized chitosan and diatom earth for protein separation. Quaternized chitosan (N-[(2-hydroxy-3-trimethylammonium)propyl] chitosan chloride) dissolved in water was mixed with diatom earth and crosslinked with glutaraldehyde under low-temperature conditions to form a cryogel. Interconnected porous monoliths were obtained after removing ice crystals from the cryogel. The monoliths adsorbed bovine serum albumin selectively from the solution mixture of bovine serum albumin and bovine ɤ-globulin, and bovine ɤ-globulin was recovered in the flow-through fraction. The adsorption selectivity was enhanced by changing the solution pH from 6.8 to 5.5. The adsorption of bovine serum albumin by the monolith was replicated at least five times following its washing with a buffer containing 400 mM NaCl and subsequent regeneration with a 10 mM acetate buffer. The composited monolith is a promising adsorbent for the removal of acidic proteins, such as serum albumin contamination in neutral proteins, for example, ɤ-globulins, in bioproduction processes.     

Near-Infrared-III-Absorbing and -Emitting Dyes: Energy-Gap Engineering of Expanded Porphyrinoids via Metallation

The synthesis of organometallic complexes of modified 26π-conjugated hexaphyrins with absorption and emission capabilities in the third near-infrared region (NIR-III) is described. Symmetry alteration of the frontier molecular orbitals (MOs) of bis-Pd^II and bis-Pt^II complexes of hexaphyrin via N-confusion modification led to substantial metal d_π–p_π interactions. This MO mixing, in turn, resulted in a significantly narrower HOMO–LUMO energy gap. A remarkable long-wavelength shift of the lowest S₀→S₁ absorption beyond 1700 nm was achieved with the bis-Pt^II complex, t -Pt₂-3 . The emergence of photoacoustic (PA) signals maximized at 1700 nm makes t -Pt₂-3 potentially useful as a NIR-III PA contrast agent. The rigid bis-Pd^II complexes, t -Pd₂-3 and c -Pd₂-3 , are rare examples of NIR emitters beyond 1500 nm. The current study provides new insight into the design of stable, expanded porphyrinic dyes possessing NIR-III-emissive and photoacoustic-response capabilities.     

Thermal reaction of electron deficient 4‐oxo‐4H‐pyrazole 1,2‐dioxide with cycloheptatriene: the first examples of the formation of an endo‐[4π + 6π]‐cycloadduct and an intramolecular 1,3‐dipolar reaction leading to a heterocage

The reaction of 3,5‐bis(methoxycarbonyl)‐4‐oxo‐4H‐pyrazole 1,2‐dioxide (1a) with 1,3,5‐cycloheptatriene (2b) gave a mixture of the novel endo‐[4 + 6]‐cycloadduct (4ab), anti‐exo‐[4 + 2]‐cycloadduct (5ab), and the heterocage (6ab) derived from the intramolecular 1,3‐dipolar cycloaddition reaction of the syn‐endo‐[4 + 2]‐cycloadduct. Analogous endo‐[4 + 6] selectivity in 1,3‐dipolar cycloadditions has not been reported previously. The X‐ray analysis indicates that 6ab has a very long N_sp3–N_sp3 bond distance of 1.617(4) Å. The cycloaddition behaviour is discussed on the basis of transition‐state structures optimized at the B3LYP/6‐31G(d) level of theory, from which predictions of the peri‐, regio‐, and stereoselectivities agreed well with the experimental results. Copyright © 2012 John Wiley & Sons, Ltd.